4 inch lift pics 67- 72 k30's

[$20071k10]

Ok guys looking to lift my new project need some refrance pics! I would like to see 67-72 k20's with 4" lift and 35/315's with a refrance to the hight of the truck next to it. Thanks for the help guys!

[coopdog]

My 72 k20 31575r16
4inch rough country suspension kit

[coopdog]

Better distance pic

[powerhouse199216]

Originally Posted by coopdog

My 72 k20 31575r16
4inch rough country suspension kit

Is that 4x2 or 4x4

[$20071k10]

Originally Posted by powerhouse199216

Is that 4x2 or 4x4

the K stands for 4x4 C is 4x2

[coopdog]

Yep shes a 4x4

[powerhouse199216]

Originally Posted by $20071k10

the K stands for 4x4 C is 4x2

can any help with my 4x2 1970 gmc 3-5 inch lift in my posts

[$20071k10]

Man nice truck!!!! I am assuming that is a 8' fence behind it.

[coopdog]

yep!

[$20071k10]

How did you set up the rear? Springs, shackle flip or block how is the ride?

[coopdog]

Heres a good pic of the rear set up

[$20071k10]

Looks nice! What is the offset on your wheels any finder rub issues?

[coopdog]

thanks, 4 inch off set, no fender rub

The wheels are 16 inch eagle alloys

[$20071k10]

So I would assume you did all the work you self if I could figure out how to download pics to this sight I would show you mine Pretty sweet story raely got the truck for 200 from a old farmer I know the original coil lead burned due to a bad regulator so a shoddy mechanic they had work on it wired it for a electronic ignition so naturally it would burn the points within minutes got it home put a hei distributer in it and fired right up!!!! Any way how hard is it to fix the rocker floor pan rust that is typical to these trucks? I am a good welder fab guy but not much experience doing body work?

[cheek711]

Gentlemen, I am building a 72 GMC quad cab 4x4 on a one ton longhorn frame. 6" suspension lift on dana 60 rears and 44 fronts with 4:11's. I am putting 315/75R16's under and want ball joints that wont submit to heavy tire wight and hard core days in the field..

Any recomends?? Ive been looking at Spicer and Proforged

[$20071k10]

Well first thing first if you have a ball joint 60 the least of your worries will be ball joints the spring mount pads are way wider than your long horn frame!!! If you are using a 44 dynatrac offers a Re-buildable ball joint!

[cheek711]

Yeah.. There is a lot of modifications to relocate mounts.. It's a 44 front axle.. I will look into those.. Thanks!

[$20071k10]

A quad cab was this ever offered factory or are you grafting two cabs together?

[cheek711]

Graft and stretch job... building it for extreme duty. I'm wanting ball joint an tie rods to handle the tire size and off road challenges..

[cheek711]

If there is an American made extreme duty B joint available, I will spend the $.i don't want to rebuild the front end in 30k miles..

[$20071k10]

I think I would go with a 14 bolt rear and if you have the $$$ to spend build a customs 14 bolt for the front using crane hd king pin 60 nuckles watched a episode of xtreme 4x4 were they bult one pretty sweet! They make a kit crane xtreme14 look it up! Then you would have a cool custom axle to go with a cool custom truck!!!!