2bbl Carburetor stuff for sale... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**COBALT** · 08-26-2003, 05:22 PM

I have lots of 2bbl stuff I need to either sell off or store long term of since my 4bbl conversion. This stuff is actually in good shape, so I don't want it to sit around and rot. I have pics if anyone wants. Feel free to make an offer. Shipping cost not included:

2 - 2bbl Cast-iron small block intakes. One is in better shape than the other. The first one was from a 327 Camero from '69, and actually came out of my truck after I had it cleaned and painted. I ran it for about 8 months before the conversion. The other is from a 283 (pre '69) and needs to be cleaned and painted before use. I never used this one. $30 for the first one, and $15 for the second (SOLD).

2 - 2bbl Rochester 2GV carburetors. Again, one is in better shape than the other because I rebuilt it about 4000 miles ago. It's ready to bolt on and use if someone really needs one. The second one has never been rebuilt. $40 for the first one (SOLD), and $20 for the second.

2bbl Accessories:

-Snorkel air cleaner. Can be cleaned and painted - someone drilled holes in the side, so it's not perfect: $15
-2bbl carb spacer in excellent shape (3" I think) - hard to find. Goes with the air cleaner. $30 - throw in air cleaner - $35
-2bbl elect. kickdown switch for TH400 - also hard to find. Mounts to the side of the carb and actuates with throttle linkage. $35 - SOLD

**COBALT** · 08-27-2003, 12:18 AM

Here are the intakes. The one I had on my truck is obviously the one on the left. That's not bare metal. It's paint (and the wrong paint). It'll have to be re-fired.

FYI on the 283 intake. The one on the left used to look like the 283 intake before I had it fired, blasted, and painted! That just tells you how good these clean up. I don't have the filler cap for the intake either. Sorry...

**COBALT** · 08-27-2003, 12:20 AM

Here's the carburetors. The one on the right is the one I rebuilt, and also the one that lived on the intake above. The other one needs rebuilt, but you can see they're identical.

Also you'll notice the kickdown switch for the TH400 in the middle. It mounts to the back of the 2bbl.

**COBALT** · 08-27-2003, 12:22 AM

Another....

**COBALT** · 08-27-2003, 12:25 AM

The snorkel air cleaner and spacer next to it. Ignore the other stuff ...

LeRoy · 08-27-2003, 02:48 AM

rossboss
Member

Registered: Dec 2002
Location: pacific north west
Posts: 26

wanted 283 2brl intake manifold
Hope to find a 283 2 brl manifold fairly close to Washington so the 36 lbs. shipping doesn't kill me.

**oldiron** · 08-27-2003, 08:55 AM

Hey Cobalt, I would be interested in the kick down switch.
Dennis

**COBALT** · 08-27-2003, 12:27 PM

Cool. I'll put them aside.

lol I figured you'd probably be interested in the kickdown switch, oldiron. Probably should have just PM'd you to see if you wanted it. Oh well.

I'll PM you here in a second.

LeRoy: Thanks for the heads up. I saw his post, and sent him a PM. Thanks again...

**COBALT** · 08-27-2003, 06:40 PM

ttt

**COBALT** · 08-28-2003, 09:39 AM

ttt

rossboss · 08-28-2003, 09:49 PM

I'm interested in the older 2 brl manifold.
rossboss
everett, wa.

**COBALT** · 08-28-2003, 11:00 PM

Great. I'll PM you.

DennyB · 08-30-2003, 11:46 AM

Mo sent for the Rebuilt 2bbl carb
Thanks

rossboss · 09-02-2003, 11:07 PM

Sure would like that manifold, but seem to be having trouble getting a hold of you.

**COBALT** · 09-03-2003, 02:34 AM

Yeah sorry 'bout that. No excuse. I sent you a PM with my phone number. If I don't hear from you by tomorrow afternoon I'll buzz the number you gave me. We'll hook up. Hope I didn't mess up any project you're working on...

**COBALT** · 09-05-2003, 11:07 PM

I'll "ttt" this one more time in case anyone else is interested...

The older 2bbl intake is sold.
The rebuilt 2bbl carburetor is sold.
The 2bbl TH400 kickdown switch is sold.

08-26-2003, 05:22 PM	#1
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	2bbl Carburetor stuff for sale... I have lots of 2bbl stuff I need to either sell off or store long term of since my 4bbl conversion. This stuff is actually in good shape, so I don't want it to sit around and rot. I have pics if anyone wants. Feel free to make an offer. Shipping cost not included: 2 - 2bbl Cast-iron small block intakes. One is in better shape than the other. The first one was from a 327 Camero from '69, and actually came out of my truck after I had it cleaned and painted. I ran it for about 8 months before the conversion. The other is from a 283 (pre '69) and needs to be cleaned and painted before use. I never used this one. $30 for the first one, and $15 for the second (SOLD). 2 - 2bbl Rochester 2GV carburetors. Again, one is in better shape than the other because I rebuilt it about 4000 miles ago. It's ready to bolt on and use if someone really needs one. The second one has never been rebuilt. $40 for the first one (SOLD), and $20 for the second. 2bbl Accessories: -Snorkel air cleaner. Can be cleaned and painted - someone drilled holes in the side, so it's not perfect: $15 -2bbl carb spacer in excellent shape (3" I think) - hard to find. Goes with the air cleaner. $30 - throw in air cleaner - $35 -2bbl elect. kickdown switch for TH400 - also hard to find. Mounts to the side of the carb and actuates with throttle linkage. $35 - SOLD __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 09-03-2003 at 03:52 PM.

08-27-2003, 12:18 AM	#2
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Here are the intakes. The one I had on my truck is obviously the one on the left. That's not bare metal. It's paint (and the wrong paint). It'll have to be re-fired. FYI on the 283 intake. The one on the left used to look like the 283 intake before I had it fired, blasted, and painted! That just tells you how good these clean up. I don't have the filler cap for the intake either. Sorry... Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 08-27-2003 at 12:46 PM.

08-27-2003, 12:20 AM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Here's the carburetors. The one on the right is the one I rebuilt, and also the one that lived on the intake above. The other one needs rebuilt, but you can see they're identical. Also you'll notice the kickdown switch for the TH400 in the middle. It mounts to the back of the 2bbl. Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 08-27-2003 at 12:26 AM.

08-27-2003, 12:22 AM	#4
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Another.... Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-27-2003, 12:25 AM	#5
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	The snorkel air cleaner and spacer next to it. Ignore the other stuff ... Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-27-2003, 02:48 AM	#6
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Came off the 66 and older page rossboss Member Registered: Dec 2002 Location: pacific north west Posts: 26 wanted 283 2brl intake manifold Hope to find a 283 2 brl manifold fairly close to Washington so the 36 lbs. shipping doesn't kill me. __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

08-27-2003, 08:55 AM	#7
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Hey Cobalt, I would be interested in the kick down switch. Dennis __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

08-27-2003, 12:27 PM	#8
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Cool. I'll put them aside. lol I figured you'd probably be interested in the kickdown switch, oldiron. Probably should have just PM'd you to see if you wanted it. Oh well. I'll PM you here in a second. LeRoy: Thanks for the heads up. I saw his post, and sent him a PM. Thanks again... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 08-27-2003 at 12:48 PM.

08-27-2003, 06:40 PM	#9
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	ttt __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-28-2003, 09:39 AM	#10
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	ttt __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-28-2003, 09:49 PM	#11
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	I'm interested in the older 2 brl manifold. rossboss everett, wa.

08-28-2003, 11:00 PM	#12
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Great. I'll PM you. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-30-2003, 11:46 AM	#13
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Mo sent for the Rebuilt 2bbl carb Thanks __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

09-02-2003, 11:07 PM	#14
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	2 brl manifold Sure would like that manifold, but seem to be having trouble getting a hold of you.

09-03-2003, 02:34 AM	#15
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Yeah sorry 'bout that. No excuse. I sent you a PM with my phone number. If I don't hear from you by tomorrow afternoon I'll buzz the number you gave me. We'll hook up. Hope I didn't mess up any project you're working on... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 09-03-2003 at 02:43 AM.



Register or Log In To remove these advertisements.

09-05-2003, 11:07 PM	#16
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I'll "ttt" this one more time in case anyone else is interested... The older 2bbl intake is sold. The rebuilt 2bbl carburetor is sold. The 2bbl TH400 kickdown switch is sold. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

Register or Log In To remove these advertisements.