Outer rocker welding question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65standard · 03-12-2015, 11:47 AM

Anyone know if the outer rocker gets spot welded down to the inner rocker along the door gasket area? Mine were too far gone to know where the welds would be.

U

**CUSTOM/10** · 03-12-2015, 12:05 PM

Yes they do !

65standard · 03-12-2015, 12:18 PM

Thanks Gary. I'm going to weld it in right now.

I don't see why anyone would complain about these classic parts rockers. The fit is superb and the price is unbeatable. All of my patch panels are spot on

**CUSTOM/10** · 03-12-2015, 12:36 PM

The patch panels now are much better than the use to be. I once tried putting repop rockers on ( 20 yrs ago ) and they were just horrible. Luckily back then you could still get them from the chevy dealership. I used Triplus rockers on my current project and the fit great !

Gary

**CUSTOM/10** · 03-12-2015, 12:40 PM

Hey !

I strongly suggest you hang your doors and get them alined before welding your rockers on !!!! If you haven't already !!!

65standard · 03-12-2015, 08:07 PM

Thanks for all your help. Right side rocker is done. Now off to the left side rust repairs. Then the bed will have to come off to replace the cab corners.

I didn't set the door first, but I took careful measurements before I cut the old one out. It worked out fine on this side. The other side is all gone and I will have to set the door on to make sure the rocker is at the right height.

briank · 03-12-2015, 10:44 PM

Nice work, you dont mess around. Im just north of you, when can I drop mine off?

03-12-2015, 11:47 AM	#1
65standard Registered User Join Date: Dec 2014 Location: Coal City, IL Posts: 695	Outer rocker welding question Anyone know if the outer rocker gets spot welded down to the inner rocker along the door gasket area? Mine were too far gone to know where the welds would be. U __________________ Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker

03-12-2015, 12:05 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Outer rocker welding question Yes they do ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-12-2015, 12:18 PM	#3
65standard Registered User Join Date: Dec 2014 Location: Coal City, IL Posts: 695	Re: Outer rocker welding question Thanks Gary. I'm going to weld it in right now. I don't see why anyone would complain about these classic parts rockers. The fit is superb and the price is unbeatable. All of my patch panels are spot on __________________ Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker

03-12-2015, 12:36 PM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Outer rocker welding question The patch panels now are much better than the use to be. I once tried putting repop rockers on ( 20 yrs ago ) and they were just horrible. Luckily back then you could still get them from the chevy dealership. I used Triplus rockers on my current project and the fit great ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-12-2015, 12:40 PM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Outer rocker welding question Hey ! I strongly suggest you hang your doors and get them alined before welding your rockers on !!!! If you haven't already !!! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-12-2015, 08:07 PM	#6
65standard Registered User Join Date: Dec 2014 Location: Coal City, IL Posts: 695	Re: Outer rocker welding question Thanks for all your help. Right side rocker is done. Now off to the left side rust repairs. Then the bed will have to come off to replace the cab corners. I didn't set the door first, but I took careful measurements before I cut the old one out. It worked out fine on this side. The other side is all gone and I will have to set the door on to make sure the rocker is at the right height. __________________ Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker

03-12-2015, 10:44 PM	#7
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Outer rocker welding question Nice work, you dont mess around. Im just north of you, when can I drop mine off?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.