|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-18-2015, 12:11 AM
|
#1 |
|
Registered User
Join Date: Jun 2010
Location: stigler, oklahoma
Posts: 190
|
fan switch problems need help. (new wiring harness)
i bought a new wiring harness for my 71 c10 with factory air and the kit has almost everything but i can not find the wires that go to the blower motor switch on it. it has the wires for the blower resistor and the blower relay and when i fellow those wires back they don't go to the blower switch they just go back to the fuse block. its a painless harness and has been every straight forward about everything but this. i'm at a loss of what to do is there another harness i need to get because i have factory ac which to me wouldn't make sense seeing as how it has wires to hook up ac built into it. any help would be wonderful. thanks everyone.
__________________
71 c10 with a 305. new dd wohoo 1956 chevy bel air hard top with a 327. 1998 honda passport V6 old dd. |
|
|
|
03-18-2015, 01:01 AM
|
#2 |
|
Registered User
Join Date: Jun 2010
Location: stigler, oklahoma
Posts: 190
|
Re: fan switch problems need help. (new wiring harness)
problem solved as it turns out there is another harness that is made for the ac and blower switch. which my manual makes no mention of which is quite bother some. but at least i found it after two days of looking and a lot if hair pulling. thanks guys.
__________________
71 c10 with a 305. new dd wohoo 1956 chevy bel air hard top with a 327. 1998 honda passport V6 old dd. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
