tool help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

moon77 · 03-18-2015, 09:25 PM

I'm going to try and rebuild 2 transmission this year. I want to make a stand but I cant find this clamp anywhere. I've searcher transmission tool website. Ebay. Amazon. And searched countless forums. could you guys help me out and steer me in the right directio. Ifeel I can't buy one I'll have to make one. here's a pic of what it is.

franken · 03-18-2015, 09:59 PM

Maybe a cheap engine stand?
It would then mount to the front trans holes, the tailhousing holes, or the crossmember holes.

**undertaker72** · 03-18-2015, 10:06 PM

it kinda looks like a hitler hurse crout can v.w engine type set-up it looks like it can do the job

68c10airstream · 03-18-2015, 10:41 PM

This would be a kent moore part, probably expensive. Go into any gm dealer and ask the tranny guy to look at his stand and get the part# off of it and then go to the parts dept and ask for the price.

_Ogre · 03-19-2015, 03:42 PM

that would be an easy couple hour fab job

moon77 · 03-19-2015, 05:05 PM

I have some tubing. I'll just make one lol. I can't find the darn thing anywhere lol. Thanks a lot for replying guys. I appreciate it

Bigdav160 · 03-19-2015, 08:07 PM

The base and the bracket are available for $222 @ Atech Tools

_Ogre · 03-25-2015, 01:34 PM

Quote:

Originally Posted by Bigdav160

The base and the bracket are available for $222

or make your own for about $22

moon77 · 03-19-2015, 08:10 PM

OMG!! thank you big Dave! my fabrication is weak. Buying one of these is do much easier lol.

cg285 · 03-25-2015, 12:46 PM

many a trans was repaired using a 15 gallon drum, even at the dealership level

clinebarger · 03-25-2015, 07:38 PM

Quote:

Originally Posted by cg285

many a trans was repaired using a 15 gallon drum, even at the dealership level

I really hope not

franken · 03-25-2015, 09:22 PM

I'm confused. How does spending $220 on a tool to rotate a trans in an odd direction for 2 trans make sense?
I can make something from a 2x4 for $10 and reuse the parts for years. I like the right tool as much as anyone but unless you plan a career in home trans rebuilding, wrong tool.

**PGSigns** · 03-26-2015, 07:35 AM

A work bench with a 2 1/2" hole in it works.
Jimmy

moon77 · 03-26-2015, 09:03 PM

Fixed it lol. Just threw a quick bench together low enough.

03-18-2015, 09:25 PM	#1
moon77 Registered User Join Date: Dec 2012 Location: central Indiana Posts: 57	tool help. I'm going to try and rebuild 2 transmission this year. I want to make a stand but I cant find this clamp anywhere. I've searcher transmission tool website. Ebay. Amazon. And searched countless forums. could you guys help me out and steer me in the right directio. Ifeel I can't buy one I'll have to make one. here's a pic of what it is. Attached Images

03-18-2015, 09:59 PM	#2
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,123	Re: tool help. Maybe a cheap engine stand? It would then mount to the front trans holes, the tailhousing holes, or the crossmember holes.

03-18-2015, 10:06 PM	#3
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: tool help. it kinda looks like a hitler hurse crout can v.w engine type set-up it looks like it can do the job

03-18-2015, 10:41 PM	#4
68c10airstream Registered User Join Date: Mar 2013 Location: Marquette michigan Posts: 828	Re: tool help. This would be a kent moore part, probably expensive. Go into any gm dealer and ask the tranny guy to look at his stand and get the part# off of it and then go to the parts dept and ask for the price.

03-19-2015, 03:42 PM	#5
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: tool help. that would be an easy couple hour fab job __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

03-19-2015, 05:05 PM	#6
moon77 Registered User Join Date: Dec 2012 Location: central Indiana Posts: 57	Re: tool help. I have some tubing. I'll just make one lol. I can't find the darn thing anywhere lol. Thanks a lot for replying guys. I appreciate it

03-19-2015, 08:07 PM	#7
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: tool help. The base and the bracket are available for $222 @ Atech Tools __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

03-19-2015, 08:10 PM	#9
moon77 Registered User Join Date: Dec 2012 Location: central Indiana Posts: 57	Re: tool help. OMG!! thank you big Dave! my fabrication is weak. Buying one of these is do much easier lol.

03-25-2015, 12:46 PM	#10
cg285 Registered User Join Date: Aug 2013 Location: sumterville, florida Posts: 914	Re: tool help. many a trans was repaired using a 15 gallon drum, even at the dealership level

03-25-2015, 09:22 PM	#12
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,123	Re: tool help. I'm confused. How does spending $220 on a tool to rotate a trans in an odd direction for 2 trans make sense? I can make something from a 2x4 for $10 and reuse the parts for years. I like the right tool as much as anyone but unless you plan a career in home trans rebuilding, wrong tool.

03-26-2015, 07:35 AM	#13
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: tool help. A work bench with a 2 1/2" hole in it works. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

03-26-2015, 09:03 PM	#14
moon77 Registered User Join Date: Dec 2012 Location: central Indiana Posts: 57	Re: tool help. Fixed it lol. Just threw a quick bench together low enough. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.