FL Wtb frame horns - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BugzC10 · 03-23-2015, 08:35 PM

Looking for a set of front frame horns for my 70 stepper. I'm getting rid of the roll pan look, going back to a bumper, but I need to replace the horns that where hacked off by the PO.

**Ol Blue K20** · 03-23-2015, 10:56 PM

How long do you need? I have some off of a K20 frame if that helps

BugzC10 · 03-24-2015, 07:24 AM

Quote:

Originally Posted by Ol Blue K20

How long do you need? I have some off of a K20 frame if that helps

I have another thread requesting the messurement from the leading edge of the radiator support to the tip of the horn determine how much i need to replace, but I would say the lenght of each one needs to be cut at least back to where the radiator support is riveted on would give me plenty of metal to work with.

I appriciate the offer, but Before you cut, do you know if the K20 is the same as the C10 in the frame horn area?

**Ol Blue K20** · 03-24-2015, 08:02 AM

Quote:

Originally Posted by BugzC10

I have another thread requesting the messurement from the leading edge of the radiator support to the tip of the horn determine how much i need to replace, but I would say the lenght of each one needs to be cut at least back to where the radiator support is riveted on would give me plenty of metal to work with.

I appriciate the offer, but Before you cut, do you know if the K20 is the same as the C10 in the frame horn area?

I'm not sure if they're the same or not. This frame is also bent and i will look to see where the bend starts. Maybe someone could chime in on whether there the same or not.

BugzC10 · 03-24-2015, 08:13 AM

Maybe looking at this picture you can tell if the frames are similar. I'm thinking I only need to replace 4"-6" of the horn.

**Ol Blue K20** · 03-24-2015, 08:27 AM

I'll look when i get home this evening

teeitup · 03-24-2015, 08:33 AM

I may have some if dale can't hook you up, I need to look at a couple frames I have to check condition

**Cash3481** · 03-24-2015, 09:09 AM

I have some too ...as well as the cross member that goes there from side to side.

BugzC10 · 03-24-2015, 09:55 AM

Quote:

Originally Posted by Cash3481

I have some too ...as well as the cross member that goes there from side to side.

There's a crossmember also? Did not see that in the schematic or photos.
I DON'T NEED THE CROSSMEMBER....THANKS. I still have thatpart.

BugzC10 · 03-24-2015, 09:53 AM

Quote:

Originally Posted by teeitup

I may have some if dale can't hook you up, I need to look at a couple frames I have to check condition

Thanks for checking Randy

**Ol Blue K20** · 03-24-2015, 09:29 AM

I think Randy or Mike will be your best bet to get what you need Bugz. I dealt with both of them and had great transactions.

BugzC10 · 03-24-2015, 09:57 AM

Quote:

Originally Posted by Ol Blue K20

I think Randy or Mike will be your best bet to get what you need Bugz. I dealt with both of them and had great transactions.

Thanks for taking a run at it...appreciate the thought. Yes I've heard good things about both of them.

**Cash3481** · 03-24-2015, 11:56 AM

Bugz,
Let me clarify...
I don't want... and would never want.... to cut in line on someone.
I want to make sure everyone gets everything they need.
If I can help out, then great. I noticed the front cross member was not the factory one. If you were replacing the horns, I wanted to offer you the cross member. Randy and Dale are great people and I certainly don't want to push anyone out of the way or slight someone over a few dollars.
I hope I didn't seem eager or pushy with the offer of parts.
Have a great day!
Thanks for the kind words Ol' blue!

BugzC10 · 03-24-2015, 12:39 PM

Quote:

Originally Posted by Cash3481

Bugz,
Let me clarify...
I don't want... and would never want.... to cut in line on someone.
I want to make sure everyone gets everything they need.
If I can help out, then great. I noticed the front cross member was not the factory one. If you were replacing the horns, I wanted to offer you the cross member. Randy and Dale are great people and I certainly don't want to push anyone out of the way or slight someone over a few dollars.
I hope I didn't seem eager or pushy with the offer of parts.
Have a great day!
Thanks for the kind words Ol' blue!

No foul no harm...I did not interpret you action as offensive. I don't think Dale did either.
I believe Dale bowed out because he was not sure of the condition of his and if the K20 horn would fit a C10.
On the crossmember. I have the stock crossmember behind the one you see in the picture. The PO welded in a monster piece of steel for some reason. I just finished cutting it out....it weighs at least 40 lbs. What a PIA to get out without screwing up the rails. I appreciate your offer however.

We'll see what Randy comes up with....then you are next. How's that sound?
Thanks Mike

teeitup · 03-24-2015, 12:55 PM

I looked this morning I have a good front section, I'm headed back to work now I will post pics and you can look at them and tell me where you'd like them cut. It has the front crossmember on it too. Thanks Randy

teeitup · 03-25-2015, 04:42 PM

I'm going out there in a bit to see if they will fit in a flat rate box, I will get with you in a bit

BugzC10 · 03-29-2015, 04:53 PM

Recieved them yesterday...thanks Gary.

03-23-2015, 08:35 PM	#1
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Wtb frame horns Looking for a set of front frame horns for my 70 stepper. I'm getting rid of the roll pan look, going back to a bumper, but I need to replace the horns that where hacked off by the PO. __________________ 1970 C10 Short Stepper with 71/72 front clip.

03-23-2015, 10:56 PM	#2
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,011	Re: Wtb frame horns How long do you need? I have some off of a K20 frame if that helps __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-24-2015, 08:13 AM	#5
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: Wtb frame horns Maybe looking at this picture you can tell if the frames are similar. I'm thinking I only need to replace 4"-6" of the horn. __________________ 1970 C10 Short Stepper with 71/72 front clip.

03-24-2015, 08:27 AM	#6
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,011	Re: Wtb frame horns I'll look when i get home this evening __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-24-2015, 08:33 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Wtb frame horns I may have some if dale can't hook you up, I need to look at a couple frames I have to check condition __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2015, 09:09 AM	#8
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Wtb frame horns I have some too ...as well as the cross member that goes there from side to side. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

03-24-2015, 09:29 AM	#11
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,011	Re: Wtb frame horns I think Randy or Mike will be your best bet to get what you need Bugz. I dealt with both of them and had great transactions. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-24-2015, 11:56 AM	#13
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Wtb frame horns Bugz, Let me clarify... I don't want... and would never want.... to cut in line on someone. I want to make sure everyone gets everything they need. If I can help out, then great. I noticed the front cross member was not the factory one. If you were replacing the horns, I wanted to offer you the cross member. Randy and Dale are great people and I certainly don't want to push anyone out of the way or slight someone over a few dollars. I hope I didn't seem eager or pushy with the offer of parts. Have a great day! Thanks for the kind words Ol' blue! __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

03-24-2015, 12:55 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Wtb frame horns I looked this morning I have a good front section, I'm headed back to work now I will post pics and you can look at them and tell me where you'd like them cut. It has the front crossmember on it too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-25-2015, 04:42 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Wtb frame horns I'm going out there in a bit to see if they will fit in a flat rate box, I will get with you in a bit Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-29-2015, 04:53 PM	#17
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: Wtb frame horns Recieved them yesterday...thanks Gary. __________________ 1970 C10 Short Stepper with 71/72 front clip.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.