Another man touched my truck today! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 03-28-2015, 01:49 PM

This DOES NOT happen often. It's weird even seeing someone else sit behind the wheel.

Got tired of the rednecked LMC kit I put on the truck like 13 years ago. When they put it up on the rack they mentioned how terrible and boogered up it was (they were 100% right) so I lied and said it was on the truck when I got it

It was ugly, hung too low, was starting to leak, and didn't leave enough room for the rear to drop.

For ~$300 I got a custom made system from the ram horns back, they left me plenty of room for my drop and tucked it up tight. It's fully welded so no more leaks!

I drive my truck a lot, so I did not want it loud, so we went with "thrush"? mufflers. It's maybe 10-15% louder than what I had and sounds killer at idle but plenty quiet when she drops into Overdrive.

They tried to talk me into a chrome tip... but I don't like a lot of flash.

I'll gladly say this was done at Steves Muffler Shop in Greer, SC. So, if you're in the upstate stop on by, they do top notch stuff.

BruthaMan · 03-28-2015, 02:08 PM

Exhaust looks nice a clean!

I had to go to the urologist last week for the "Woo woo WOO woo" exam. I felt much the same way (another man touched...) for the rest of the week.

**nlped** · 03-28-2015, 04:03 PM

Quote:

Originally Posted by BruthaMan

Exhaust looks nice a clean!

I had to go to the urologist last week for the "Woo woo WOO woo" exam. I felt much the same way (another man touched...) for the rest of the week.

snj8198 · 03-30-2015, 03:17 PM

Quote:

Originally Posted by BruthaMan

Exhaust looks nice a clean!

I had to go to the urologist last week for the "Woo woo WOO woo" exam. I felt much the same way (another man touched...) for the rest of the week.

So both you and the OP got exhaust work done...

only difference is OP doesn't mind showing his off!

Possmguts · 03-30-2015, 06:26 PM

cool

67ChevyRedneck · 03-28-2015, 02:11 PM

EARNHARDT#3 · 03-28-2015, 04:08 PM

Looks nice! Although I'm not a welded exhaust fan. I really love the nice wide band clamps. They seal as tight as a ducks ass and if you need to take the system apart for an reason it comes apart and goes back together easily. BUT if you ever need to take it off to do work, a nice clean slice can be put back together easily with a band clamp anyway...or welded.

leftybass209 · 03-28-2015, 04:15 PM

The exhaust looks great!

67ChevyRedneck · 03-28-2015, 06:02 PM

Quote:

Originally Posted by EARNHARDT#3

Looks nice! Although I'm not a welded exhaust fan. I really love the nice wide band clamps. They seal as tight as a ducks ass and if you need to take the system apart for an reason it comes apart and goes back together easily. BUT if you ever need to take it off to do work, a nice clean slice can be put back together easily with a band clamp anyway...or welded.

I actually didn't know it was going to be fully welded... didn't think to ask, but now that it's done, I kinda like it.

no1udknow · 03-31-2015, 12:38 PM

Quote:

Originally Posted by EARNHARDT#3

Looks nice! Although I'm not a welded exhaust fan. I really love the nice wide band clamps. They seal as tight as a ducks ass and if you need to take the system apart for an reason it comes apart and goes back together easily. BUT if you ever need to take it off to do work, a nice clean slice can be put back together easily with a band clamp anyway...or welded.

Your previous duck ass experience concerns me ;-)

EARNHARDT#3 · 04-27-2015, 05:08 PM

Quote:

Originally Posted by no1udknow

Your previous duck ass experience concerns me ;-)

**Dustmaker65** · 03-28-2015, 10:18 PM

Just hope "HE" was wearing gloves... oh, and lube

67ChevyRedneck · 03-30-2015, 01:54 PM

Quote:

Originally Posted by Dustmaker65

Just hope "HE" was wearing gloves... oh, and lube

That's not right!

I believe gloves were involved, but no lube, they kept the show family friendly

They were a lot gentler than I am... she's gotten the hammer a time or two!

What's funny is that I remember it taking me an entire day to get that POS LMC kit exhaust on the truck. They cut it off in like 3 minutes.

AND I bought that kit like 10 years ago, I think I paid $50 more to have this done than that stupid kit.

67ChevyRedneck · 03-30-2015, 03:31 PM

Yes, please, no pics!

karrlogs · 03-30-2015, 08:57 PM

Looks like you got a pretty good deal. And nice work on the exhaust!

jabos · 03-31-2015, 08:19 AM

Hey I just had them do my exhaust about a month ago and was very happy with the work.I did notice that truck out there the other day when i drove by, and thought to my self that is a nice lookin truck.

67ChevyRedneck · 03-31-2015, 08:23 AM

You saw my truck? You must have went by right when I just got there or just left. They had an empty lift and it was brought in immediately, and then when they drove it out I paid and left.

Have you joined the upstate truck club yet? We have a pretty big group and we meet once a month for lunch or a show, etc. This month we met at the Berea Car Show and next month is a scenic cruise through NC! We usually have 20-30 trucks come each month and our fall picnic had like 150 people show up. We try to move events around so people from different areas can make it and to keep it fun.

https://www.facebook.com/groups/UpstateGMtrucks/

http://upstategmtrucks.com/

jabos · 03-31-2015, 08:34 AM

I have looked into the club a little but I dont think my truck is ready for a club yet and I am not sure it is ready for a scenic drive yet also.What do you have to do to join the club? And yes I did see your truck there.

67ChevyRedneck · 03-31-2015, 08:48 AM

I've had a lot of club members tell me they saw my truck. I drive all over taylors/greer/Greenville with it. Most people tell me they see it at lowes or on 29.

Nothing to join (well, joining the FB page will keep you up to date with what's going on). We don't want any $, we just want everyone to have fun. You don't have to have the truck running to go to events. It was started by Matt, Paul, Dwayne, Andy, and I meeting at quaker steak a couple years ago and then took off from there. Dwayne drove his BMW to events for about a year until his 69 longhorn was back on the road. I've driven my mustang to a few. LOTS of members have late model GM trucks that they bring as well.

We do sell tee shirts and stickers to help pay for the fall picnic. They're good shirts (mine have been washed at least 30 times and still look pretty good.) I think we're currently out of everything because we're going with a new design for this year.

This was our very first meet where we decided to see if we could get people to come each month (mustang is mine, back when it had the ole man wheels on it):

jjzepplin · 03-31-2015, 09:06 AM

Well I first saw this and said to myself- "I can't wait to see what happened to this guy". Then I saw it was an exhaust redo. How lucky for you and the guy who touched your truck! Something to be said about a good exhaust system for sure.

sboris · 03-31-2015, 09:17 AM

Looks good. I prefer the fully welded. Yeah, i dont dig it when some else is sittng where i should be..
Nice truck too!!

67ChevyRedneck · 04-27-2015, 04:33 PM

Vroom Vroom!

Played with my new GoPro and editing software.

Crank up your speakers and enjoy!

*The rattling sound is my step-side tailgate, never realized how much it banged around back there!*

https://www.youtube.com/watch?v=nECSunFOkZM

Tinkermc · 04-27-2015, 05:16 PM

Very nice looking and at a good price

**truckdude239** · 04-27-2015, 08:22 PM

Darn i just paid 625 to have mine done

aris_unlimited · 04-28-2015, 01:14 AM

I was rebuilding the front suspension on my Plymouth and happened to start breaking some tools (including a pickle fork and ball joint socket). Gave up at that point and paid someone to do it.

So like you it is a rarity for me to have anyone else touching my cars lol. It was stressing leaving my car at a shop for a couple days, just didn't like it lol.

03-28-2015, 01:49 PM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Another man touched my truck today! This DOES NOT happen often. It's weird even seeing someone else sit behind the wheel. Got tired of the rednecked LMC kit I put on the truck like 13 years ago. When they put it up on the rack they mentioned how terrible and boogered up it was (they were 100% right) so I lied and said it was on the truck when I got it It was ugly, hung too low, was starting to leak, and didn't leave enough room for the rear to drop. For ~$300 I got a custom made system from the ram horns back, they left me plenty of room for my drop and tucked it up tight. It's fully welded so no more leaks! I drive my truck a lot, so I did not want it loud, so we went with "thrush"? mufflers. It's maybe 10-15% louder than what I had and sounds killer at idle but plenty quiet when she drops into Overdrive. They tried to talk me into a chrome tip... but I don't like a lot of flash. I'll gladly say this was done at Steves Muffler Shop in Greer, SC. So, if you're in the upstate stop on by, they do top notch stuff. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-28-2015, 02:08 PM	#2
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: Another man touched my truck today! Exhaust looks nice a clean! I had to go to the urologist last week for the "Woo woo WOO woo" exam. I felt much the same way (another man touched...) for the rest of the week. __________________ 1972 C10 Highlander - The making of a daily driver

03-30-2015, 06:26 PM	#5
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Another man touched my truck today! cool __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

03-28-2015, 02:11 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another man touched my truck today! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-28-2015, 04:08 PM	#7
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Another man touched my truck today! Looks nice! Although I'm not a welded exhaust fan. I really love the nice wide band clamps. They seal as tight as a ducks ass and if you need to take the system apart for an reason it comes apart and goes back together easily. BUT if you ever need to take it off to do work, a nice clean slice can be put back together easily with a band clamp anyway...or welded. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

03-28-2015, 04:15 PM	#8
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: Another man touched my truck today! The exhaust looks great!

03-28-2015, 10:18 PM	#12
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Re: Another man touched my truck today! Just hope "HE" was wearing gloves... oh, and lube __________________ Jimmy Hoelzel

03-30-2015, 03:31 PM	#14
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another man touched my truck today! Yes, please, no pics! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-30-2015, 08:57 PM	#15
karrlogs Registered User Join Date: Mar 2015 Location: CA Posts: 26	Re: Another man touched my truck today! Looks like you got a pretty good deal. And nice work on the exhaust!

03-31-2015, 08:19 AM	#16
jabos Registered User Join Date: Feb 2015 Location: greer sc Posts: 72	Re: Another man touched my truck today! Hey I just had them do my exhaust about a month ago and was very happy with the work.I did notice that truck out there the other day when i drove by, and thought to my self that is a nice lookin truck.

03-31-2015, 08:23 AM	#17
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another man touched my truck today! You saw my truck? You must have went by right when I just got there or just left. They had an empty lift and it was brought in immediately, and then when they drove it out I paid and left. Have you joined the upstate truck club yet? We have a pretty big group and we meet once a month for lunch or a show, etc. This month we met at the Berea Car Show and next month is a scenic cruise through NC! We usually have 20-30 trucks come each month and our fall picnic had like 150 people show up. We try to move events around so people from different areas can make it and to keep it fun. https://www.facebook.com/groups/UpstateGMtrucks/ http://upstategmtrucks.com/ __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-31-2015, 08:34 AM	#18
jabos Registered User Join Date: Feb 2015 Location: greer sc Posts: 72	Re: Another man touched my truck today! I have looked into the club a little but I dont think my truck is ready for a club yet and I am not sure it is ready for a scenic drive yet also.What do you have to do to join the club? And yes I did see your truck there.

03-31-2015, 08:48 AM	#19
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another man touched my truck today! I've had a lot of club members tell me they saw my truck. I drive all over taylors/greer/Greenville with it. Most people tell me they see it at lowes or on 29. Nothing to join (well, joining the FB page will keep you up to date with what's going on). We don't want any $, we just want everyone to have fun. You don't have to have the truck running to go to events. It was started by Matt, Paul, Dwayne, Andy, and I meeting at quaker steak a couple years ago and then took off from there. Dwayne drove his BMW to events for about a year until his 69 longhorn was back on the road. I've driven my mustang to a few. LOTS of members have late model GM trucks that they bring as well. We do sell tee shirts and stickers to help pay for the fall picnic. They're good shirts (mine have been washed at least 30 times and still look pretty good.) I think we're currently out of everything because we're going with a new design for this year. This was our very first meet where we decided to see if we could get people to come each month (mustang is mine, back when it had the ole man wheels on it): __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-31-2015 at 08:53 AM.

03-31-2015, 09:06 AM	#20
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,567	Re: Another man touched my truck today! Well I first saw this and said to myself- "I can't wait to see what happened to this guy". Then I saw it was an exhaust redo. How lucky for you and the guy who touched your truck! Something to be said about a good exhaust system for sure. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-31-2015, 09:17 AM	#21
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: Another man touched my truck today! Looks good. I prefer the fully welded. Yeah, i dont dig it when some else is sittng where i should be.. Nice truck too!! __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039



Register or Log In To remove these advertisements.

04-27-2015, 04:33 PM	#22
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another man touched my truck today! Vroom Vroom! Played with my new GoPro and editing software. Crank up your speakers and enjoy! The rattling sound is my step-side tailgate, never realized how much it banged around back there! https://www.youtube.com/watch?v=nECSunFOkZM __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

04-27-2015, 05:16 PM	#23
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Another man touched my truck today! Very nice looking and at a good price

04-27-2015, 08:22 PM	#24
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Another man touched my truck today! Darn i just paid 625 to have mine done __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-28-2015, 01:14 AM	#25
aris_unlimited Registered User Join Date: Sep 2014 Location: Payson, UT Posts: 53	Re: Another man touched my truck today! I was rebuilding the front suspension on my Plymouth and happened to start breaking some tools (including a pickle fork and ball joint socket). Gave up at that point and paid someone to do it. So like you it is a rarity for me to have anyone else touching my cars lol. It was stressing leaving my car at a shop for a couple days, just didn't like it lol. __________________ 1974 Plymouth Satellite (driver, project) 1972 GMC 2500 (future project, does drive though)

Register or Log In To remove these advertisements.