|
03-30-2015, 03:49 PM | #1 |
Registered User
Join Date: Aug 2013
Location: Smith, NV
Posts: 110
|
drive shaft
My next large undertaking will be converting my truck from a three speed to an automatic. I've assembled the cross member and other parts, including a decent steering column. Now I'm told (but not sure if its for certain) that the drive shaft is different between a three speed truck and an automatic truck.
Not being a transmission mechanic, I want to make sure before I begin pulling things off the truck. Can anyone enlighten me about this topic? Are the drive shaft lengths different for a three speed versus and automatic? And......what is there (if any) in difference between a drive shaft for a Turbo 350 and a Turbo 400 transmission? I believe the Turbo 350 and 400 transmissions are the same exact length (based on my hot rod experiences). |
03-30-2015, 04:15 PM | #2 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,850
|
Re: drive shaft
i know the yoke will be different and you ll have to have one put on your driveshaft.
also the 350 trans came in a longtail and a short tail. i believe the 400 was a shorttail
__________________
1967custom |
03-30-2015, 04:53 PM | #3 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,154
|
Re: drive shaft
A 3-sp manual and a short TH350 are the same length. TH400 is different.
http://67-72chevytrucks.com/vboard/s...d.php?t=390542
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
03-30-2015, 05:26 PM | #4 |
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,159
|
Re: drive shaft
Yokes are different between the TH350/3SPD and TH400.
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time |
03-30-2015, 08:36 PM | #5 |
Registered User
Join Date: Aug 2013
Location: Smith, NV
Posts: 110
|
Re: drive shaft
First let me thank those that took the time to reply.... thank you!
I know from having a 1970 with a SB and a Turbo 400, that the extra gear is nice to have on the highway. That makes me want to lean towards the 400 over the 350. Having said that and taking into account the difference in drive shaft lengths, couldn't I take my two piece three speed drive shaft and have the front piece modified to fit the Turbo 400 requirements? Any one on here that may be in Southern California area maybe selling a drive shaft from a parts truck or their old stock pile? |
03-30-2015, 09:53 PM | #6 |
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,573
|
Re: drive shaft
You are not going to gain "an extra gear" by going with the th400. Still a 3 speed, just heavier duty
|
Bookmarks |
|
|