MO Parting out a 69 GMC C1500 long bed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 04-18-2015, 08:06 AM

The cab is VERY rusty, but still a lot of good parts. I am going to be tearing this one apart this weekend, I hope. 69 GMC, small block with a three speed manual. Got to start with something, headlight bezels, $35.00 shipped for the pair. What do you need? Thanks, Fred.

**jimer1964** · 04-18-2015, 08:09 AM

Hi, price and condition of headlight harness? Thanks

**specialtyretail** · 04-18-2015, 11:15 AM

Quote:

Originally Posted by jimer1964

Hi, price and condition of headlight harness? Thanks

I will check on that when I get home this afternoon. Thanks, Fred.

**specialtyretail** · 04-18-2015, 04:16 PM

Quote:

Originally Posted by jimer1964

Hi, price and condition of headlight harness? Thanks

Harness is pretty butchered up. Sorry....

**undertaker72** · 04-18-2015, 08:57 AM

is that a oem antenna is it any good, cond? thanks

**specialtyretail** · 04-18-2015, 03:35 PM

Quote:

Originally Posted by undertaker72

is that a oem antenna is it any good, cond? thanks

Antenna on the truck is trashed. i do have this one I removed from a truck we parted out earlier, not sure if it is oem or not. $22.00 shipped. Thanks, Fred.

waylonbud · 04-18-2015, 09:49 AM

Is that a sway bar in the bed? Hard to tell on my little phone. Interested in it.
Also price and condition of inner door panels and arm rests - shipped to 37303.
Thanks.

**specialtyretail** · 04-18-2015, 11:45 AM

Quote:

Originally Posted by undertaker72

is that a oem antenna is it any good, cond? thanks

I am not sure if it is original or not. i will do my best to get it off & get you some pics this afternoon.

Quote:

Originally Posted by waylonbud

Is that a sway bar in the bed? Hard to tell on my little phone. Interested in it.
Also price and condition of inner door panels and arm rests - shipped to 37303.
Thanks.

Yes it is. I will check out the door panels and arm rests this afternoon as well. Thanks, fred.

waylonbud · 04-20-2015, 09:33 PM

Quote:

Originally Posted by waylonbud

Is that a sway bar in the bed? Hard to tell on my little phone. Interested in it.
Also price and condition of inner door panels and arm rests - shipped to 37303.
Thanks.

Still interested in prices and conditions. Thanks.

otsenre · 04-18-2015, 11:51 AM

Heater controls, good levers?

**specialtyretail** · 04-18-2015, 12:02 PM

Quote:

Originally Posted by otsenre

Heater controls, good levers?

I am pretty sure they are like all of the others out there, but I will check this afternoon when I get in. Thanks, Fred.

**specialtyretail** · 04-19-2015, 12:07 PM

Quote:

Originally Posted by otsenre

Heater controls, good levers?

Just what I thought, like all of them, broken. Thanks, Fred.

**specialtyretail** · 04-18-2015, 04:30 PM

The wiper arms off it, $19.00 shipped SOLD,,,, THANKS.... for the pair.

berch 69GMC · 04-18-2015, 08:45 PM

Interested in drivers side door shipped to S. Florida, thanks

**specialtyretail** · 04-18-2015, 10:28 PM

Quote:

Originally Posted by berch 69GMC

Interested in drivers side door shipped to S. Florida, thanks

Sorry, have one of my local guys buying the doors. Thanks, Fred.

**a1vintage69** · 04-20-2015, 11:17 PM

Quote:

Originally Posted by specialtyretail

The wiper arms off it, $19.00 shipped for the pair.

Fred , I will take these wiper arms. I will pay you now. thanks, Steve J

**a1vintage69** · 04-20-2015, 11:27 PM

Fred , Can you check and make sure the wiper arms are Trico before I pay pal you/ thanks,

**specialtyretail** · 04-20-2015, 11:39 PM

Quote:

Originally Posted by a1vintage69

Fred , Can you check and make sure the wiper arms are Trico before I pay pal you/ thanks,

Hey Steve. I will check in the morning, but I am pretty sure they are. Thanks, Fred.

**specialtyretail** · 04-21-2015, 07:32 AM

Quote:

Originally Posted by a1vintage69

Fred , Can you check and make sure the wiper arms are Trico before I pay pal you/ thanks,

Just checked. Yes, they are Trico arms. Stamped underneath where they pivot off the mounting stud. Thanks, Fred.

**a1vintage69** · 04-21-2015, 09:16 AM

Fred, just sent payment for the wiper arms. $19.00 to sharley. thanks,Steve

**specialtyretail** · 04-21-2015, 11:37 AM

Quote:

Originally Posted by a1vintage69

Fred, just sent payment for the wiper arms. $19.00 to sharley. thanks,Steve

Hey Steve. I will get them ready to go. Thanks, Fred.

68shortwide · 04-19-2015, 03:37 PM

How much for Trans and Column?

**specialtyretail** · 04-19-2015, 03:43 PM

Quote:

Originally Posted by 68shortwide

How much for Trans and Column?

Hey Jack. $100.00 for both. My stock car guys around here usually wear me out over these transmissions. Thanks, Fred.

neal64ss · 04-19-2015, 04:53 PM

I need a good front left (drivers side) lower control arm.

**specialtyretail** · 04-19-2015, 04:59 PM

Quote:

Originally Posted by neal64ss

I need a good front left (drivers side) lower control arm.

It would be a while before I could sell that. I have to keep it to where I can still move the truck around. Thanks, Fred.

04-18-2015, 08:06 AM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Parting out a 69 GMC C1500 long bed. The cab is VERY rusty, but still a lot of good parts. I am going to be tearing this one apart this weekend, I hope. 69 GMC, small block with a three speed manual. Got to start with something, headlight bezels, $35.00 shipped for the pair. What do you need? Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

04-18-2015, 08:09 AM	#2
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Parting out a 69 GMC C1500 long bed. Hi, price and condition of headlight harness? Thanks

04-18-2015, 08:57 AM	#5
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Parting out a 69 GMC C1500 long bed. is that a oem antenna is it any good, cond? thanks

04-18-2015, 09:49 AM	#7
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting out a 69 GMC C1500 long bed. Is that a sway bar in the bed? Hard to tell on my little phone. Interested in it. Also price and condition of inner door panels and arm rests - shipped to 37303. Thanks.

04-18-2015, 11:51 AM	#10
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: Parting out a 69 GMC C1500 long bed. Heater controls, good levers?

04-18-2015, 04:30 PM	#13
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out a 69 GMC C1500 long bed. The wiper arms off it, $19.00 shipped SOLD,,,, THANKS.... for the pair. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 04-21-2015 at 02:16 PM.

04-18-2015, 08:45 PM	#14
berch 69GMC Registered User Join Date: Jan 2015 Location: Boynton bch, FL Posts: 187	Re: Parting out a 69 GMC C1500 long bed. Interested in drivers side door shipped to S. Florida, thanks

04-20-2015, 11:27 PM	#17
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,014	Re: Parting out a 69 GMC C1500 long bed. Fred , Can you check and make sure the wiper arms are Trico before I pay pal you/ thanks,

04-21-2015, 09:16 AM	#20
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,014	Re: Parting out a 69 GMC C1500 long bed. Fred, just sent payment for the wiper arms. $19.00 to sharley. thanks,Steve

04-19-2015, 03:37 PM	#22
68shortwide Registered User Join Date: Jul 2014 Location: Missouri Posts: 1,427	Re: Parting out a 69 GMC C1500 long bed. How much for Trans and Column? __________________ Jack 1968 swb on air

04-19-2015, 04:53 PM	#24
neal64ss Registered User Join Date: Mar 2014 Location: Russellville, AR Posts: 81	Re: Parting out a 69 GMC C1500 long bed. I need a good front left (drivers side) lower control arm.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.