Where to mount the ECM? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcardfan · 04-19-2015, 08:45 PM

Ok guys I am getting ready to mount my ECM in the engine bay and was wondering what everyone else has done. Let's see some pics.

**robgmaddux** · 04-19-2015, 11:38 PM

This is my 72 k20 it's mounted drivers side radiator support

BR3W CITY · 04-20-2015, 01:02 AM

Some folks rolled their eyes at me for exposing all of my wiring in the engine bay, but its easy to troubleshoot and the ecm has effective cooling there. Its been like this for a couple yeare but I'll be forced to move it when we take the inner fenders out.

trkfrk · 04-20-2015, 10:41 AM

I put mine inside the glove box along with all of my fuses and relays.

dwcardfan · 04-20-2015, 02:47 PM

Quote:

Originally Posted by BR3W CITY

Some folks rolled their eyes at me for exposing all of my wiring in the engine bay, but its easy to troubleshoot and the ecm has effective cooling there. Its been like this for a couple yeare but I'll be forced to move it when we take the inner fenders out.

That's where I was thinking I would mount mine. I think it looks fine there plus like you said it's easy to access.
Thanks for the pic.
Posted via Mobile Device

dwcardfan · 04-20-2015, 06:59 PM

Quote:

Originally Posted by dwcardfan

That's where I was thinking I would mount mine. I think it looks fine there plus like you said it's easy to access.
Thanks for the pic.
Posted via Mobile Device

Here is what I decided to do.
Posted via Mobile Device

**dec010974** · 04-20-2015, 09:48 PM

hello to all. it looks easy, but everything was welded. good luck

uxdesigner · 04-20-2015, 11:15 PM

Quote:

Originally Posted by dec010974

hello to all. it looks easy, but everything was welded. good luck

Great idea, thanks for posting pictures!

H20cooled · 04-22-2015, 04:28 PM

I put mine on the passenger side inner fender, I took the factory bracket and cut off the extra plastic and then put rubber feet on it and screwed it down. It works great and should not get to hot. I tried to find a good place in the cab but I did not want to lose the glove box and this just seemed a lot easier.

jadedbird · 04-25-2015, 06:12 PM

are you guys using stock truck harnesses? and are you modifying them at all? or are these stock length? and do you tie them into your existing truck harnesseS?

BR3W CITY · 04-25-2015, 06:36 PM

Mine is a custom made harness, but IMO the most versatile stock harness to start with is the service vans. Its got the longest main branches, and everything comes out in only a few places.

The trucks, cars and vans all have the same wiring types, just in different lenghts/branches.

mcmlxix · 07-24-2015, 01:10 AM

Here is a nice mount that can be used in many different locations... $45
http://www.ironworksspeedandkustom.c...prod/prd61.htm

Andy4639 · 07-24-2015, 12:00 PM

I put mine in the glove box also. I cut the backside of it out for the connections to come through and it fit nice and tight no movement at all.
I still have a little storage room but I use the center console for most stuff anyway!

josueh95 · 07-30-2015, 03:04 AM

i put mine under the bench seat, might or might not work with a stock harness, mine is an aftermarket made by current performance

04-19-2015, 08:45 PM	#1
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Where to mount the ECM? Ok guys I am getting ready to mount my ECM in the engine bay and was wondering what everyone else has done. Let's see some pics. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

04-19-2015, 11:38 PM	#2
robgmaddux Junior Member Join Date: Sep 2013 Location: Coram Montana Posts: 69	Re: Where to mount the ECM? This is my 72 k20 it's mounted drivers side radiator support Attached Images

04-20-2015, 01:02 AM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Where to mount the ECM? Some folks rolled their eyes at me for exposing all of my wiring in the engine bay, but its easy to troubleshoot and the ecm has effective cooling there. Its been like this for a couple yeare but I'll be forced to move it when we take the inner fenders out. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-20-2015, 10:41 AM	#4
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Where to mount the ECM? I put mine inside the glove box along with all of my fuses and relays. Attached Images __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

04-20-2015, 09:48 PM	#7
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 967	Re: Where to mount the ECM? hello to all. it looks easy, but everything was welded. good luck Attached Images

04-22-2015, 04:28 PM	#9
H20cooled Registered User Join Date: Sep 2014 Location: Milwaukie, OR Posts: 223	Re: Where to mount the ECM? I put mine on the passenger side inner fender, I took the factory bracket and cut off the extra plastic and then put rubber feet on it and screwed it down. It works great and should not get to hot. I tried to find a good place in the cab but I did not want to lose the glove box and this just seemed a lot easier.

04-25-2015, 06:12 PM	#10
jadedbird Registered User Join Date: Apr 2015 Location: So Indiana Posts: 139	Re: Where to mount the ECM? are you guys using stock truck harnesses? and are you modifying them at all? or are these stock length? and do you tie them into your existing truck harnesseS?

04-25-2015, 06:36 PM	#11
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Where to mount the ECM? Mine is a custom made harness, but IMO the most versatile stock harness to start with is the service vans. Its got the longest main branches, and everything comes out in only a few places. The trucks, cars and vans all have the same wiring types, just in different lenghts/branches. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-24-2015, 01:10 AM	#12
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Where to mount the ECM? Here is a nice mount that can be used in many different locations... $45 http://www.ironworksspeedandkustom.c...prod/prd61.htm __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

07-24-2015, 12:00 PM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Where to mount the ECM? I put mine in the glove box also. I cut the backside of it out for the connections to come through and it fit nice and tight no movement at all. I still have a little storage room but I use the center console for most stuff anyway! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2015, 03:04 AM	#14
josueh95 Registered User Join Date: Oct 2014 Location: denver, CO Posts: 34	Re: Where to mount the ECM? i put mine under the bench seat, might or might not work with a stock harness, mine is an aftermarket made by current performance



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.