looking for answers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72okcdroppinlow · 04-21-2015, 07:42 PM

Hey everyone this is my first post been lurking around for a while and finally joined. I'm look for a full detailed write up of someone putting an ls2 into a 72 long bed if possible? If anyone can point me in the right direction that would be great. I've looked around on here but really haven't found what I was looking for yet.

Andy4639 · 04-21-2015, 07:47 PM

Have you tried here?
Welcome to the board.

http://67-72chevytrucks.com/vboard/f...prune=-1&f=206

IndifferentJester · 04-21-2015, 08:18 PM

Thanks for the input.

geezer#99 · 04-21-2015, 08:28 PM

Quote:

Originally Posted by IndifferentJester

Figured I'd tag along looking for answers regarding my engine size. Even with google I can't figure it out.

^^^
3970010

Thanks for the input.

It's a 1975 350.
http://www.nastyz28.com/gm-chevy-cod...s-suffix-9.php

JFYI hijacking threads is frowned upon.
Better to start your own.

IndifferentJester · 04-21-2015, 08:41 PM

Thanks for the reply and I'll keep that in mind from now on.

**70cst** · 04-21-2015, 08:54 PM

Hey 72okcdroppinlow...

to the forums and

from Ohio.

Thye LINK below is a 10 page thread that might be of interest to you

Re: My first C10-LS2/4L70E swap
http://67-72chevytrucks.com/vboard/s...587435&page=10

72okcdroppinlow · 04-21-2015, 09:00 PM

Thank I been looking for this

**70cst** · 04-21-2015, 10:18 PM

Quote:

Originally Posted by 72okcdroppinlow

Thank I been looking for this

Glad it helped

oldertruckfan · 04-21-2015, 10:44 PM

VO =flint plant 3= march 07 =7th day

TXH suffix =1975 350 van & bus L LS9 165 4 C-30 & 3500

happy hunting

oldertruckfan · 04-21-2015, 10:51 PM

block casting reads like this

1969-79
casting cu in low power hi power mains typically used in
3970010 350 185 370 2 or 4 car, truck, Vette

**special-K** · 04-22-2015, 07:15 AM

This thread is a good example of why you shouldn't hijack.

04-21-2015, 07:42 PM	#1
72okcdroppinlow Registered User Join Date: Mar 2015 Location: Oklahoma City, Oklahoma Posts: 4	looking for answers Hey everyone this is my first post been lurking around for a while and finally joined. I'm look for a full detailed write up of someone putting an ls2 into a 72 long bed if possible? If anyone can point me in the right direction that would be great. I've looked around on here but really haven't found what I was looking for yet.

04-21-2015, 07:47 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: looking for answers Have you tried here? Welcome to the board. http://67-72chevytrucks.com/vboard/f...prune=-1&f=206 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

04-21-2015, 08:18 PM	#3
IndifferentJester Registered User Join Date: Oct 2014 Location: Clarksville, TN Posts: 31	Re: looking for answers Thanks for the input. Last edited by IndifferentJester; 04-21-2015 at 08:43 PM.

04-21-2015, 08:41 PM	#5
IndifferentJester Registered User Join Date: Oct 2014 Location: Clarksville, TN Posts: 31	Re: looking for answers Thanks for the reply and I'll keep that in mind from now on.

04-21-2015, 08:54 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: looking for answers Hey 72okcdroppinlow... to the forums and from Ohio. Thye LINK below is a 10 page thread that might be of interest to you Re: My first C10-LS2/4L70E swap http://67-72chevytrucks.com/vboard/s...587435&page=10 __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-21-2015, 09:00 PM	#7
72okcdroppinlow Registered User Join Date: Mar 2015 Location: Oklahoma City, Oklahoma Posts: 4	Re: looking for answers Thank I been looking for this

04-21-2015, 10:44 PM	#9
oldertruckfan Registered User Join Date: Mar 2014 Location: Spring Hill Kansas Posts: 209	Re: looking for answers VO =flint plant 3= march 07 =7th day TXH suffix =1975 350 van & bus L LS9 165 4 C-30 & 3500 happy hunting

04-21-2015, 10:51 PM	#10
oldertruckfan Registered User Join Date: Mar 2014 Location: Spring Hill Kansas Posts: 209	Re: looking for answers block casting reads like this 1969-79 casting cu in low power hi power mains typically used in 3970010 350 185 370 2 or 4 car, truck, Vette

04-22-2015, 07:15 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: looking for answers This thread is a good example of why you shouldn't hijack. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.