|
|
|
04-26-2015, 02:20 PM
|
#1 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
How low can you go?
Interested in seeing how far a 79 short box can go without having to cut into the bed. Riding on stock height wheels.
Any pics? |
|
|
|
04-26-2015, 02:54 PM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Wiltshire, UK
Posts: 157
|
Re: How low can you go?
I've just measured up for flipping the axle on mine (@5-6") and the chassis rails will need notching although the diff shouldn't hit the bed. Shock stiffness will also be a factor. I must confess to having no idea of stock tyre size as mine has been fitted with 31 x 10.50 -15's by a previous owner.
|
|
|
|
|
04-26-2015, 03:05 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
Re: How low can you go?
Thanks J1mmy. I am looking at a 79 and it's already lowered on rallies, looks to be stock size rubber. I am thinking it would pretty good bagged, but if I get a truck, I need to make sure the bed floor isn't adjusted.
|
|
|
|
|
04-26-2015, 03:09 PM
|
#4 |
|
Registered User
Join Date: Aug 2009
Location: Wiltshire, UK
Posts: 157
|
Re: How low can you go?
I love my 79 - it's rough n ready but a rarer sight over here than the earlier and later model trucks. How has it been lowered up to this point? Leaf removal? Shackles?
Edit - I'm guessing that stock tyre size is 235 75 15 as per most 1/2 tons of the era? |
|
|
|
|
04-27-2015, 12:48 AM
|
#5 | |
|
Registered User
Join Date: Feb 2015
Location: Santa Rosa, Ca.
Posts: 539
|
Re: How low can you go?
Quote:
__________________
1977 Chevrolet C/10 Silverado. Step-Side, Factory 454, TH400, 3.73 Posi 12 Bolt. 1975 Chevrolet El Camino. 350, TH400, 3.08 Posi 10 Bolt. |
|
|
|
|
|
04-26-2015, 03:11 PM
|
#6 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
Re: How low can you go?
It was done with a flip kit in the rear and spindles up front 3/4
|
|
|
|
|
04-26-2015, 03:13 PM
|
#7 |
|
Registered User
Join Date: Aug 2009
Location: Wiltshire, UK
Posts: 157
|
Re: How low can you go?
Flip kit only did 4"? Hmmmm...got a pic or link?
|
|
|
|
|
04-26-2015, 03:18 PM
|
#8 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
Re: How low can you go?
Not with me. On the phone shopping with the missus...
|
|
|
|
|
04-26-2015, 03:53 PM
|
#9 | |
|
Registered User
Join Date: Aug 2009
Location: Wiltshire, UK
Posts: 157
|
Re: How low can you go?
Quote:
|
|
|
|
|
|
04-27-2015, 12:25 AM
|
#10 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
Re: How low can you go?
It wasn't so bad.
Any suggestions on a budget air bag set up for a 79? |
|
|
|
|
04-27-2015, 05:06 PM
|
#11 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: How low can you go?
Look at member Jwalls truck. He has before and after of static and bagged with just a C notch out back.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
04-27-2015, 05:19 PM
|
#12 |
|
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: How low can you go?
This is with a 27.5" rear tire size
This is the absolute lowest you can go without the rearend hitting the bed floor. Has a bolt in c-notch with bagged suspension. Before bags with static drop & same c-notch. |
|
|
|
|
04-27-2015, 05:26 PM
|
#13 |
|
Registered User
Join Date: Dec 2009
Location: N/A
Posts: 29
|
Re: How low can you go?
Thank you!!! I think if I get it I'll leave it where it's at. If I go any lower I'll bag it if I can piece together a set up.
That truck looks beautiful by the way |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
