The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-02-2003, 10:03 PM   #1
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
some videos with the new motor

first one is just a look at the motor at idle

second one is a "little" tire spinngin proble i have through all 3 gears. remember i've got a peg leg 10 bolt with 2.73 highway gears. and power breaking is not needed

last one is just from about 30 mph - 100mph i wasn't really watchin the speedo so i don't know for sure

http://naraku.mine.nu/~r6z4o6/vids/
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-02-2003, 10:12 PM   #2
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
sounds good man.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 09-02-2003, 10:15 PM   #3
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Hey way cool videos!!!
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 09-02-2003, 10:24 PM   #4
C-10volvo
Registered User
 
C-10volvo's Avatar
 
Join Date: May 2003
Location: Lake Oswego, Oregon
Posts: 1,028
that 2nd burnout vid is sweet. i wish my truck was fast... anyways, what setup do you have?
__________________
Ken Morgan
For fun: 1964 Volvo 122
For slow: 1984 Chevrolet C-10
For everything else: 1997 BMW M3
C-10volvo is offline   Reply With Quote
Old 09-02-2003, 10:27 PM   #5
phantom dually
Project92 SWB stepside
 
phantom dually's Avatar
 
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
Nice!! Time for a posi!!!!!!
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448
phantom dually is offline   Reply With Quote
Old 09-02-2003, 10:43 PM   #6
gldevall
Registered User
 
gldevall's Avatar
 
Join Date: Mar 2003
Location: Walker, LA
Posts: 2,925
Ryan, sounds awesome.
__________________
Gary -1986 SWB: lowered 4/6, SOLD!!!
-Best 1/4 mile: 14.51 @ 91.01 MPH
-2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!!
-2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels
gldevall is offline   Reply With Quote
Old 09-02-2003, 10:52 PM   #7
racedvl
Account Suspended
 
racedvl's Avatar
 
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
Ok, I want a full report on that truck. Full engine specs, and what exhaust. I have a 400 block sitting in the garage, and I really like the way your truck sounds, and bugies! Also, what trans are you using? Thanks.


BTW. . . . . Friggin awesome man!!!
racedvl is offline   Reply With Quote
Old 09-02-2003, 10:57 PM   #8
swervin ervin
You get what you pay for
 
swervin ervin's Avatar
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
Cool. Sounds great.
__________________
Mike

1985 Chevy C-10
swervin ervin is offline   Reply With Quote
Old 09-02-2003, 10:59 PM   #9
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
"408 sbc, rotating assembly balanced by kim barr racing engines in garland tx, steel crank, 5.7 forged eagle SIR rods, forged srp pistons, ARP head and main studs, moroso 7 qt side sump pan, melling high volume oil pump, dart iron eagle heads (200 cc runners, 64 cc chambers, 2.02/1.60 ss valves), 10:1 cr, comp cams 274 extreme energy solid lift cam (.501/.510, 274/280 adv, 236/242 at .05), comp magnum 1.52 roller tip rockers, dart kool can intake, holley 110 gph mechanical fuel pump, edlebrock 600 cfm carb (temporary), edlebrock victory jr waterpump, march dual serpintine aluminum pulleys (underdriven crank pully), hei with pertronix upgrade kit, taylor wires, autolite plugs, dyno max ceramic coated headers"

i'm still lacking a few things to really have it running right. next is the 750 custom built holley, then some kind of correctly curved distributor (i can't get this one right) with a 6aL box and external coil, then the 12 bolt with eaton posi and 3.73's gears (i think i have traction problems now ), then slicks and nitrous.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-02-2003, 11:02 PM   #10
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
Quote:
Originally posted by racedvl
Ok, I want a full report on that truck. Full engine specs, and what exhaust. I have a 400 block sitting in the garage, and I really like the way your truck sounds, and bugies! Also, what trans are you using? Thanks.


BTW. . . . . Friggin awesome man!!!
exhust is the chevell shorty headers made by dynomax that everyone is talking about, then just daul 2.5 inch pipe and 40 series straight out of the muffler, no tailpipes. i will be switching to a little quiter mufflers eventauly but its not a major priority right now.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-02-2003, 11:24 PM   #11
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Ryan, you are a d*ckhead!

You just cost me about two hours of sleep tonight, I will be layin in bed mad at myself for taking my truck apart and envious of how your truck runs and sounds!

I miss my truck

-Jeff
bigblock73 is offline   Reply With Quote
Old 09-02-2003, 11:27 PM   #12
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
Quote:
Originally posted by bigblock73
Ryan, you are a d*ckhead!

You just cost me about two hours of sleep tonight, I will be layin in bed mad at myself for taking my truck apart and envious of how your truck runs and sounds!

I miss my truck

-Jeff
yeah but i am way jealous of guys like you. i really want to take mine down to the frame and make it perfect, but its the only vehicle i have, so i guess it will have to wait till i out of college, which will be awhile at the pace i'm going, lol
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-03-2003, 12:40 AM   #13
BaggedC10
Under construction!
 
BaggedC10's Avatar
 
Join Date: Aug 2002
Location: NorCal
Posts: 1,065
Quote:
Originally posted by bigblock73
You just cost me about two hours of sleep tonight, I will be layin in bed mad at myself for taking my truck apart and envious of how your truck runs and sounds!

I miss my truck

-Jeff


You and I both, Jeff.
__________________
2001 Silverado bagged on 22's. *Sold*
BaggedC10 is offline   Reply With Quote
Old 09-03-2003, 01:48 AM   #14
87 Shortwide
Registered User
 
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
That is WEAK...you will be owned fool!
__________________
Daily Driver: 1992 Blazer dropped on rallys

Project: 87 GMC shortwide, About to get a little boost
87 Shortwide is offline   Reply With Quote
Old 09-03-2003, 02:35 AM   #15
ElGracho
Gentleman Jim Driver
 
ElGracho's Avatar
 
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,553
Sounds awesome and the movies are sweet.

Only thing I don't like is that clear fuel filter. I had one of those on a car that had a Holley and I was forever changing needle and seats. I put a regular wix filter on it and and never changed them again. (I did drive it quite a ways before I got rid of it...)
__________________
Joe
'75 GMC Gentleman Jim
'84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter)
'85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans
also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed
ElGracho is offline   Reply With Quote
Old 09-03-2003, 08:38 AM   #16
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
Quote:
Originally posted by 87 Shortwide
That is WEAK...you will be owned fool!
bring it beotch!
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-03-2003, 08:49 AM   #17
87 Shortwide
Registered User
 
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
I will hook and you will not :p and you will go
__________________
Daily Driver: 1992 Blazer dropped on rallys

Project: 87 GMC shortwide, About to get a little boost
87 Shortwide is offline   Reply With Quote
Old 09-03-2003, 11:12 AM   #18
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
what r u going to race me in? the wagon? cuase your truck isn't goin anywhere i should be able to hook decently when i get some either 28X12.50 or 28X13.50 slicks, mabey
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 09-03-2003, 11:55 AM   #19
PHOENIX
Registered User
 
Join Date: Oct 2002
Location: Phoenix, Arizona
Posts: 4,703
NICE!

Any chance of getting more videos?
__________________
* AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *
PHOENIX is offline   Reply With Quote
Old 09-03-2003, 12:40 PM   #20
87 Shortwide
Registered User
 
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
Since the truck isnt done, I will be fair and dig out the sissy ass impala. Hows that sound?
__________________
Daily Driver: 1992 Blazer dropped on rallys

Project: 87 GMC shortwide, About to get a little boost
87 Shortwide is offline   Reply With Quote
Old 09-03-2003, 01:07 PM   #21
bigd65
Registered User
 
bigd65's Avatar
 
Join Date: Mar 2000
Location: Clute, TX.
Posts: 1,935
THAT IS AN AWSOME IDLE . what size cam and type cam is that.

i wanna hear more of it just idling ;D
__________________
2004 Silverado Crewcab
1972 Chevy Monte Carlo
2017 Chevy Tahoe
bigd65 is offline   Reply With Quote
Old 09-03-2003, 02:13 PM   #22
LOHRTBT
BeWarE tHe eViL CrAnkTOe!
 
LOHRTBT's Avatar
 
Join Date: Oct 2002
Location: Yukon, OK
Posts: 3,605
Damn dude! That is awesome!!!
__________________
~Dave~
You can call me Mike, Mike Oxlong

- 1986 Chevy SWB - Stock for now
- 1986 Chevy Custom SWB *Stolen 6/26/05*
- 1985 Chevy SWB SOLD
- 1999 T/A Some mods
www.cardomain.com/id/ramairdave

AIM Screenname - Jester84
LOHRTBT is offline   Reply With Quote
Old 09-03-2003, 08:34 PM   #23
84Stepper
Registered User
 
84Stepper's Avatar
 
Join Date: Feb 2003
Location: Edmond, Oklahoma
Posts: 425
Wow...gave me goosebumps man! You should see the smile on my face. Thanks for posting the videos!!! I'm gonna click on that 2nd one again.
__________________
84 Chevy Stepside, 350, TH350, 268h
Comp cam, Hooker headers, MSD
Pro Billet, Edelbrock Performer manifold
and 1604 carb, 40 Series Flowmasters
dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi
84Stepper is offline   Reply With Quote
Old 09-03-2003, 08:50 PM   #24
Russell
Professional Grade
 
Russell's Avatar
 
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
I can only dream...

Someday I'll build that 400 HP 5.7 litre V8 350...
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)
Russell is offline   Reply With Quote
Old 09-03-2003, 09:10 PM   #25
Ric83
Registered User
 
Ric83's Avatar
 
Join Date: Jan 2003
Location: Austin, TX
Posts: 824
Simply awesome!!
__________________
Ric
'83 Silverado SWB Fleetside
Here she is
Ric83 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com