FL swp brackets and pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FL71C10** · 06-12-2015, 12:20 AM

I am selling an alternator bracket set for a small block short water pump set up, plus crank pulleys and water pump pulley. This will mount the alternator on the drivers side, as our trucks were from the factory.

The long alternator bracket looks like it was repaired at some point. You can see the weld in the pictures. It looks like it could be ground down better and then would not cause any problems. It's also a little bent, but should be able to be straightened out.

I assembled these parts to convert my late 70's motor over to a short water pump setup, and then ended up finding the LT1 motor and trans, which changed all my plans.

The water pump pulley is part #3751232 BB, and the crank pulley is part #3995646 AH

Pulleys are sold, pending payment. Alternator brackets are still available for $30 shipped, CONUS. Postal money order or Paypal (add 3.5 percent to cover fees)

**michael bustamante** · 06-12-2015, 12:35 AM

No pics? Does this set put the alt on the passenger side?

**FL71C10** · 06-12-2015, 06:38 AM

No, drivers side. It's for a short water pump. I'll post pics on a little while

**FL71C10** · 06-12-2015, 08:30 AM

Pics of upper bracket

**FL71C10** · 06-12-2015, 08:31 AM

More of the upper bracket, and a couple of the lower bracket

**FL71C10** · 06-12-2015, 08:32 AM

crank pulley

**Chevy Fan Always** · 06-12-2015, 08:39 PM

I would be interested in all the pulleys. How much shipped to 44805 if you would seperate from the brackets?

Mike Wilson

**FL71C10** · 06-12-2015, 10:44 PM

How about $35?

**FL71C10** · 06-13-2015, 12:00 PM

If people want to separate these, I would do $35 shipped CONUS on the pulleys, and $30 shipped on the alternator brackets.

Thanks!

**Chevy Fan Always** · 06-13-2015, 12:18 PM

Posted via Mobile Device

**Chevy Fan Always** · 06-13-2015, 12:18 PM

Quote:

Originally Posted by Chevy Fan Always

Posted via Mobile Device

I will take the pulleys. Pm your paypal
Posted via Mobile Device

**FL71C10** · 06-13-2015, 11:26 PM

Pulleys sold to Chevy Fan Always pending payment.

Alternator brackets are still available for $30 shipped, CONUS. Please add 3.5% if paying by Paypal.

Thanks!

**FL71C10** · 06-14-2015, 11:54 AM

ttt

**FL71C10** · 06-15-2015, 11:29 AM

Chevy Fan Always,

Pulleys are going out via UPS today, here's the tracking info.

1Z903AF20394502290

Thanks!

**Chevy Fan Always** · 06-18-2015, 09:02 PM

Quote:

Originally Posted by FL71C10

Chevy Fan Always,

Pulleys are going out via UPS today, here's the tracking info.

1Z903AF20394502290u

Thanks!

I got the pulleys today, great shape.thanks.
mike
Posted via Mobile Device

06-12-2015, 12:20 AM	#1
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	swp brackets and pulleys I am selling an alternator bracket set for a small block short water pump set up, plus crank pulleys and water pump pulley. This will mount the alternator on the drivers side, as our trucks were from the factory. The long alternator bracket looks like it was repaired at some point. You can see the weld in the pictures. It looks like it could be ground down better and then would not cause any problems. It's also a little bent, but should be able to be straightened out. I assembled these parts to convert my late 70's motor over to a short water pump setup, and then ended up finding the LT1 motor and trans, which changed all my plans. The water pump pulley is part #3751232 BB, and the crank pulley is part #3995646 AH Pulleys are sold, pending payment. Alternator brackets are still available for $30 shipped, CONUS. Postal money order or Paypal (add 3.5 percent to cover fees) __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 06-13-2015 at 11:25 PM.

06-12-2015, 12:35 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: swp brackets and pulleys No pics? Does this set put the alt on the passenger side? __________________ 1967custom

06-12-2015, 08:30 AM	#4
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys Pics of upper bracket Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-12-2015, 08:31 AM	#5
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys More of the upper bracket, and a couple of the lower bracket Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-12-2015, 08:32 AM	#6
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys crank pulley Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-12-2015, 06:38 AM	#3
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys No, drivers side. It's for a short water pump. I'll post pics on a little while __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-12-2015, 08:39 PM	#7
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: swp brackets and pulleys I would be interested in all the pulleys. How much shipped to 44805 if you would seperate from the brackets? Mike Wilson

06-12-2015, 10:44 PM	#8
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys How about $35? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-13-2015, 12:00 PM	#9
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys If people want to separate these, I would do $35 shipped CONUS on the pulleys, and $30 shipped on the alternator brackets. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-13-2015, 12:18 PM	#10
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: swp brackets and pulleys Posted via Mobile Device

06-13-2015, 11:26 PM	#12
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys Pulleys sold to Chevy Fan Always pending payment. Alternator brackets are still available for $30 shipped, CONUS. Please add 3.5% if paying by Paypal. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-14-2015, 11:54 AM	#13
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys ttt __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-15-2015, 11:29 AM	#14
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: swp brackets and pulleys Chevy Fan Always, Pulleys are going out via UPS today, here's the tracking info. 1Z903AF20394502290 Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.