|
|
|
09-05-2003, 06:34 PM
|
#1 |
|
Registered User
Join Date: Jun 2003
Location: Little Rock, Ar
Posts: 124
|
Chopped windshield
Where would one get a windshield for a chopped top? Is there more to look into than the windshield if one is planning to do this?
__________________
U.S.A.F. 68' C-10 Stepside 305 w/ 4 speed |
|
|
|
09-05-2003, 06:51 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
If you check around, some of the glass shops will cut the windsheild for you.....its not cheap tho! I was quoted $450-500 to do the job(ouch). I worked in glass for about 10 yrs, & decided to cut my sheild. it worked out alright, but you have to know it took about 6 hrs to strip the sheild down to size......then that hand held belt sander, with a pump bottle of water to keep the glass cool......lets just say it was a good sized project for a "backyarder" without all the good tools
 the flat stuff is easy to cut , if you have a "feel" for glass.....the curved stuff takes some patience. I like chops, cool as hell! My longhorn has a 4" chop....that was a 60hr week to primer(my 1st 1)+ 6 or 7 threads in one knuckle(ouch). It was worth it tho.... I still havent done the door glass, but here is a link to a few shots... http://community.webshots.com/user/hotrodhorn good luck,crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
09-05-2003, 07:33 PM
|
#3 |
|
Registered User
Join Date: Jun 2003
Location: Little Rock, Ar
Posts: 124
|
I love the way it looks! Just didn't know how it was done.
__________________
U.S.A.F. 68' C-10 Stepside 305 w/ 4 speed |
|
|
|
|
09-05-2003, 07:39 PM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
If you pick up a copy of HOW TO CHOP TOPS, by Tex smith you will see how the curved glass is cut, as well as about 4 different methods to chop our favorite truck....lots of good info! Ill dig up the book later, if you need the publisher. crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
09-05-2003, 07:43 PM
|
#5 |
|
Registered User
Join Date: Jun 2003
Location: Little Rock, Ar
Posts: 124
|
Found it on Amazon.com. Should be here in 6-7 days!
http://www.amazon.com/exec/obidos/tg...glance&s=books
__________________
U.S.A.F. 68' C-10 Stepside 305 w/ 4 speed |
|
|
|
|
09-05-2003, 11:41 PM
|
#6 |
|
Registered User
 
Join Date: Aug 2001
Location: West Fork, Arkansas - Razorback Country
Posts: 1,826
|
There was a cab near by here that had already been chopped and was for sale - don't remember if it had glass or not.
__________________
Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - SOLD Driver-2004 GMC Z-71 Ext-cab |
|
|
|
|
09-05-2003, 11:54 PM
|
#7 |
|
Registered User
Join Date: Jun 2003
Location: Little Rock, Ar
Posts: 124
|
There is a Car/Truck show tomorrow here on the Air Base, but I haven't seen anything but 72's really.
__________________
U.S.A.F. 68' C-10 Stepside 305 w/ 4 speed |
|
|
|
|
09-06-2003, 08:44 AM
|
#8 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
Hey welcome to the board from another Arkansan. Just 20 miles south of you in Jefferson. Didn't know of the show at the air base. Won't make it though. gonna buy a house and I have to go look at it one more time before i commit myself to 30 years of looking at it. Get some pics if you go.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
|
09-06-2003, 06:35 PM
|
#9 |
|
Registered User
Join Date: Jun 2003
Location: Little Rock, Ar
Posts: 124
|
Cool. We should have an Arkansas meet. BBQ or something.
__________________
U.S.A.F. 68' C-10 Stepside 305 w/ 4 speed |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
