|
|
|
07-10-2015, 05:48 PM
|
#1 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Fan shroud question.
With the onset of some really hot weather, I would like to add a fan shroud. My 350/260 crate with GM serpentine system runs right at the thermostat range (180) while moving. I have a new copper/brass radiator and it works really well. It can idle in 95*+ weather thru a typical drive-thru line, but the temp rises to 220*. Not a problem, but it appears that a shroud would help. Here's the the rub - The serpentine fan is 20" in diameter, way too big for my factory shroud. The fan sits almost dead center in the radiator (about 2-1/2" back from the core.)........... Have any of you guys, running the serpentine set-up, found any shroud that fits?
I don't have access to the fab. shop I used to, so any help would be appreciated.
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee) 
|
|
|
|
07-10-2015, 07:19 PM
|
#2 |
|
Registered User
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
|
Re: Fan shroud question.
Speedway sells a few kits that might work. Not much money and maybe could be tailored to work/look good.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!! |
|
|
|
|
07-11-2015, 08:29 PM
|
#3 |
|
Senior Member
 
Join Date: Oct 2010
Location: Cadiz, Ky
Posts: 514
|
Re: Fan shroud question.
I changed my fan blade to an 18 inch fan. Fits the stock shroud.
__________________
1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab |
|
|
|
|
07-11-2015, 08:45 PM
|
#4 |
|
Registered User
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,189
|
Re: Fan shroud question.
Have you tried looking for a different sized fan? That seems a much cheaper solution as opposed to picking up a diy shroud kit that needs custom mounts.
|
|
|
|
|
07-11-2015, 11:09 PM
|
#5 | |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Fan shroud question.
Quote:
Any part numbers for an 18" reverse-rotation fan?
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee)
|
|
|
|
|
|
07-12-2015, 10:04 AM
|
#6 |
|
Senior Member
Join Date: Oct 2010
Location: Cadiz, Ky
Posts: 514
|
Re: Fan shroud question.
I went with the Derale. Part #D17918. I think there were a couple different options.
https://www.etrailer.com/Radiator-Fa...le/D17918.html
__________________
1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
