Gas tank the same

[Old school choppers]

I have a 1971 chevy p 10 STEP VAN and was wanting to know if the gas tank for a 69 -72 blazer use the same gas tank
Posted via Mobile Device

[elkniks]

It looks pretty close but not the same. Here are a couple of pictures of a new blazer tank that I just got. I need to figure out why my photos load upside down, sorry.

[Old school choppers]

Originally Posted by elkniks

It looks pretty close but not the same. Here are a couple of pictures of a new blazer tank that I just got. I need to figure out why my photos load upside down, sorry.

Posted via Mobile Device

[Old school choppers]

Originally Posted by Old school choppers

Posted via Mobile Device

Thank you for sending the pictures maybe I can get dimensions from you lenght width and height Your pictures come in the right way they're not upside down
Posted via Mobile Device

[Old school choppers]

Originally Posted by elkniks

It looks pretty close but not the same. Here are a couple of pictures of a new blazer tank that I just got. I need to figure out why my photos load upside down, sorry.

Thank you for sending pictures if you could measure length width and height maybe that can help me out also also your pictures come in the right way they are not upside down
Posted via Mobile Device

[1rippen6]

Originally Posted by Old school choppers

I have a 1971 chevy p 10 STEP VAN and was wanting to know if the gas tank for a 69 -72 blazer use the same gas tank
Posted via Mobile Device

Do you have a better picture of the neck?

[Old school choppers]

Originally Posted by 1rippen6

Do you have a better picture of the neck?

Hope this works
Posted via Mobile Device

[elkniks]

Here is a picture of filler neck. Tank is 26 1/2" wide, 16" long(front to back), and 13" deep. All measurements not including seam/mount flange that sticks out about 2 1/2" all around.

I figured out my photo problem, I guess if you hold an Iphone upside down when taking photos they will load here upside down no matter what.

[Onalaska Blazer]

This is my tank with old neck installed, you can see how it is formed to fit around the body mount

[Onalaska Blazer]

http://www.ebay.com/itm/1971-Chevy-B...0da9e5&vxp=mtr

[Onalaska Blazer]

You need to change out the filler neck with the old one

[hemi43]

I don't want to hijack the thread, but was wondering if the rubber 1 3/8 hose that connects the tank to the filler neck is available? Mine is rock hard and I don't want to reuse it.I need it to be a bit longer than original, because I'm using a custom tank with the neck a bit further forward. Someone mentioned using rad hose because the fuel doesn't actually sit in it, but I'm concerned the ethanol will breakdown the rubber.

[scorn908]

Originally Posted by hemi43

I don't want to hijack the thread, but was wondering if the rubber 1 3/8 hose that connects the tank to the filler neck is available? Mine is rock hard and I don't want to reuse it.I need it to be a bit longer than original, because I'm using a custom tank with the neck a bit further forward. Someone mentioned using rad hose because the fuel doesn't actually sit in it, but I'm concerned the ethanol will breakdown the rubber.

I just changed mine out on my Blazer and you can buy fuel grade hose at a parts store. i have a fuel cell in mine and used 15 inches of it

[1rippen6]

I think LMC sells