CA 1973 Trac Lok Dana 60 + driveshaft from '63 k truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'63GENIII · 07-19-2015, 11:11 AM

I've got a 1973 Dana 60 with a Trac Lok that I pulled out of my '63. Nothing wrong with it except it does need a drivers side wheel cylinder. The reason I'm getting rid of it is that I swapped in a disc brake 14B. The spring measurements are 40.5 - standard GM. The Trac Lok works great. Parking brake cables are included, shock mounts for the '63 are still on it. I'm including the driveshaft as well. Its got the smaller joints (3310?) on it and is about 2 years old. I had it built when I swapped from the divorced T221 to the divorced 205. I needed a longer DS for the swap. 200$ takes it. Really don't want to ship it.

63frankintruck · 12-12-2015, 06:44 AM

What gear ratio? Wish you would consider shipping. I'm i. 76262 zip and my rear is shot in my 63 1/2 ton long bed. ( I think this would work in my truck?)

'63GENIII · 12-12-2015, 11:01 AM

Quote:

Originally Posted by 63frankintruck

What gear ratio? Wish you would consider shipping. I'm i. 76262 zip and my rear is shot in my 63 1/2 ton long bed. ( I think this would work in my truck?)

Sorry, the Dana sold already. Thanks for the interest

Mathew21 · 12-12-2015, 09:39 AM

If you decide to separate the drive shaft and are willing to ship it I would be interested pending a measurement of it.
Thanks, Matt

'63GENIII · 12-12-2015, 11:03 AM

Quote:

Originally Posted by Mathew21

If you decide to separate the drive shaft and are willing to ship it I would be interested pending a measurement of it.
Thanks, Matt

I'll get some measurement on the DS today. If you pm your zip, I'll check into shipping.

07-19-2015, 11:11 AM	#1
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	1973 Trac Lok Dana 60 + driveshaft from '63 k truck I've got a 1973 Dana 60 with a Trac Lok that I pulled out of my '63. Nothing wrong with it except it does need a drivers side wheel cylinder. The reason I'm getting rid of it is that I swapped in a disc brake 14B. The spring measurements are 40.5 - standard GM. The Trac Lok works great. Parking brake cables are included, shock mounts for the '63 are still on it. I'm including the driveshaft as well. Its got the smaller joints (3310?) on it and is about 2 years old. I had it built when I swapped from the divorced T221 to the divorced 205. I needed a longer DS for the swap. 200$ takes it. Really don't want to ship it. Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

12-12-2015, 06:44 AM	#2
63frankintruck Registered User Join Date: Oct 2015 Location: Keller, tx Posts: 426	Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck What gear ratio? Wish you would consider shipping. I'm i. 76262 zip and my rear is shot in my 63 1/2 ton long bed. ( I think this would work in my truck?)

12-12-2015, 09:39 AM	#4
Mathew21 Registered User Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck If you decide to separate the drive shaft and are willing to ship it I would be interested pending a measurement of it. Thanks, Matt __________________ It only has original paint once



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.