Rollback! Oh my! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 07-23-2015, 05:05 PM

I stopped and talked to him about a year ago. He said he would sell it for $3800.00 which I thought to be to much at the time.

I stopped by again with a friend and we looked at it and he said to let him think about it. He wasn't sure if he wanted to sell it now! He cranked it right up with a couple of pumps of the gas pedal.

Has a 350 in it now with HEI and dual exhaust. Truck looks pretty solid but has the typical rust in the doors and corners.

leftybass209 · 07-23-2015, 06:44 PM

That's a great find!

Every day it sits, the rust spreads and makes it just that much more expensive and involved to replace.

That'd make a nice restored rollback, perhaps to haul around a red long bed maybe??

Andy4639 · 07-23-2015, 06:56 PM

Quote:

Originally Posted by leftybass209

That's a great find!

Every day it sits, the rust spreads and makes it just that much more expensive and involved to replace.

That'd make a nice restored rollback, perhaps to haul around a red long bed maybe??

That's the plan!

**special-K** · 07-23-2015, 09:16 PM

Golf carts!

Andy4639 · 07-23-2015, 09:34 PM

Quote:

Originally Posted by special-K

Golf carts!

Most likely both! Ha!

ekgguy · 07-24-2015, 12:55 AM

Take the bed cover off the longbed, put the golf cart in the longbed, put the longbed on the rollback...

**Jurassic-1** · 07-24-2015, 01:09 AM

That would make a nice hauler. I think you should buy it.

**BC10** · 07-24-2015, 03:22 AM

That looks pretty sweet. I'd buy it for that price!

cherokeejohn · 07-24-2015, 09:06 AM

Do you know what kind/brand of bed it is on it? It looks like a decent buy to me, judging from the pics. I drove tow trucks for almost 6 years and by far roll-back's are my favorite. The versatility and uses are endless, and they tend to be good at making at least some of your investment $$$ back too. If it ends up in your driveway, I hope there will be a build thread. Great find!

Andy4639 · 07-24-2015, 09:51 AM

Quote:

Originally Posted by cherokeejohn

Do you know what kind/brand of bed it is on it? It looks like a decent buy to me, judging from the pics. I drove tow trucks for almost 6 years and by far roll-back's are my favorite. The versatility and uses are endless, and they tend to be good at making at least some of your investment $$$ back too. If it ends up in your driveway, I hope there will be a build thread. Great find!

Haven't had much luck with him knowing a lot about it are either he has forgotten it. The guy is in his late 70's are early 80's. He said he bought it new, just like it is, I don't know if they ever sold them new like this but everything looks like it would have come on it. I didn't see any tag on the bed though. The ramps are on roller's under the bed and it has a tool box made into the bed on drivers side. Not very big but can put hand tools and breaker bar inside it.
Interior is about like I expected, seat has a big rip right in the drivers side. Has the 4 speed with heat only. Non tach dash but has the gauges.

MARKDTN · 07-24-2015, 10:43 AM

So does the bed move hydraulically and "roll back" or is it a fixed flatbed that you winch/drive a car up ramps? Or a dump flatbed?

cherokeejohn · 07-24-2015, 10:51 AM

The majority of tow trucks on the eastern side of the country came from Raliegh NC. I don't remember the name of the company but I've made several trips myself down to pick up a new tow rig. They buy the cab and chassis, the utility body/beds, booms, and winch's from the factories and install, set up, and sell them right there. You can take a tour of the whole plant. They mostly use Dynamic and Jerr-Dan set ups now-a-days, but 30+ years ago there was quite a bunch more manufacturers (Holmes was a very popular brand name thru-out the 70s). There should be a small tag somewhere on the bed that will tell the info on Who, where, what it is along with the weight and hauling capacities. the tags are typically near the control area. Anyhow, if you can get some more pics of the bed a little closer I can show it to my step-brother who owns the tow/repo' business I worked for and he will probably know right away what kind it is. He's been in the business for 37 years now. It's definitely a great find! It would be a good candidate for a 8.1 liter LS swap

, Maybe painted to match your 71.

Andy4639 · 07-24-2015, 12:54 PM

Quote:

Originally Posted by cherokeejohn

The majority of tow trucks on the eastern side of the country came from Raliegh NC. I don't remember the name of the company but I've made several trips myself down to pick up a new tow rig. They buy the cab and chassis, the utility body/beds, booms, and winch's from the factories and install, set up, and sell them right there. You can take a tour of the whole plant. They mostly use Dynamic and Jerr-Dan set ups now-a-days, but 30+ years ago there was quite a bunch more manufacturers (Holmes was a very popular brand name thru-out the 70s). There should be a small tag somewhere on the bed that will tell the info on Who, where, what it is along with the weight and hauling capacities. the tags are typically near the control area. Anyhow, if you can get some more pics of the bed a little closer I can show it to my step-brother who owns the tow/repo' business I worked for and he will probably know right away what kind it is. He's been in the business for 37 years now. It's definitely a great find! It would be a good candidate for a 8.1 liter LS swap

, Maybe painted to match your 71.

I will try and get some more pictures of it as soon as I can. Working all weekend long so it maybe Monday before I get back by there.
The bed is fixed doesn't move. There is no winch but I can add that later. I was going to leave it pretty much as is and just clean it up good make it road worth and use it for local car shows with the 71 on it. the owner says the brakes need work. manual brakes now but I will install a booster if I do buy it.

Redline novdog · 07-24-2015, 07:45 PM

That's way cool. I can't imagine hauling a car with the manual brakes. Maybe that is why they to go inspection. Back in the day. Sweet lookin' hauler!!!

**special-K** · 07-25-2015, 07:49 AM

Since the bed is stationary, this isn't a rollback. It's a ramp truck, or more like car hauler, since there is no dovetail and bed is level. Hodges is the big builder of this type of body in KY. Many of these beds are home made. I see this truck has the later disc brake wheels with the 9/16" stud holes. I wonder what was done there. The original studs are 7/16" and the lug nuts were flat-backed castle-type. The later wheels used a spreader ring with bevels for the chamfered lugs. I ran into this on a '70 C/30 I had that I put chrome Budds on. First I just used chrome acorn nuts, then I did a full brake job and had a machine shop bore new holes for 9/16" studs.

Andy4639 · 08-30-2016, 08:50 PM

Old post but thought I would update. We bought the truck for $3500.00! I have it at my buddies shop to get the front brakes working and carb rebuilt. Once I get it back I will start on the cosmetic stuff.
I have to come up with a name for the door's also. Going to leave it just like it is for now and just get running good and water tight again. Needs all gaskets swapped out.

Any thoughts.
A couple of mine.
Fisher Classic's
Fisher's Garage
Classic Towing

**Boog** · 08-31-2016, 06:05 AM

Andy's hauling
not for hire

**special-K** · 08-31-2016, 08:55 AM

In the same script as on your door emblem Custom Carts, but maybe letters starting bigger to smaller ramped up to the right on an arc. Done so letters look chrome or just silver and shadowed. You could write "Fisher's" (or "Andy's") at top left in smaller script in other color, like orange or bright blue.

You could put at the bottom, Upstate ~ Beach, SC

Andy4639 · 09-22-2016, 07:33 PM

Quote:

Originally Posted by special-K

In the same script as on your door emblem Custom Carts, but maybe letters starting bigger to smaller ramped up to the right on an arc. Done so letters look chrome or just silver and shadowed. You could write "Fisher's" (or "Andy's") at top left in smaller script in other color, like orange or bright blue.

You could put at the bottom, Upstate ~ Beach, SC

I like the way you think. Tim!

If I ever get the darn thing back I have new exhaust to install. New 40's Flow masters already with down pipes. Took them off the 64 Impala and saved them for this reason.

100%Chevy · 09-23-2016, 12:10 AM

If you up-grade the brakes,i'd go with hydroboost.
I have them on my 82 hauler.
Best stopping truck I've owned!
Mike.

Andy4639 · 09-23-2016, 02:26 AM

Quote:

Originally Posted by 100%Chevy

If you up-grade the brakes,i'd go with hydroboost.
I have them on my 82 hauler.
Best stopping truck I've owned!
Mike.

I have been thinking that's the way to go on this truck. Just have to get time to go yard hunting for everything.

YBNORML · 09-23-2016, 12:58 AM

Nice purchase!

I vote for something along the lines of Pop's Hauling. With the rate your pops is buying vehicles, it won't be long before you can put her to use. Or, what were the names of the divisions that he was part of back in the day? Maybe something along those lines, pay some respect to his history. That would be pretty cool.

**Ironangel** · 09-23-2016, 04:10 AM

"Fishers Repo & Recovery" Nice score Andy!

**Warrens69GMC** · 09-23-2016, 08:27 AM

Nice score!!

JimmyFloyd · 09-23-2016, 08:56 AM

awesome truck. Glad you were able to make it happen.

07-23-2015, 05:05 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Rollback! Oh my! I stopped and talked to him about a year ago. He said he would sell it for $3800.00 which I thought to be to much at the time. I stopped by again with a friend and we looked at it and he said to let him think about it. He wasn't sure if he wanted to sell it now! He cranked it right up with a couple of pumps of the gas pedal. Has a 350 in it now with HEI and dual exhaust. Truck looks pretty solid but has the typical rust in the doors and corners. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-23-2015, 06:44 PM	#2
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: Rollback! Oh my! That's a great find! Every day it sits, the rust spreads and makes it just that much more expensive and involved to replace. That'd make a nice restored rollback, perhaps to haul around a red long bed maybe??

07-23-2015, 09:16 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rollback! Oh my! Golf carts! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2015, 12:55 AM	#6
ekgguy Registered User Join Date: Jan 2012 Location: Humble, Texas Posts: 414	Re: Rollback! Oh my! Take the bed cover off the longbed, put the golf cart in the longbed, put the longbed on the rollback... __________________ Matt Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=672655 "Father thank you for the gathering of friends, Father we give thanks for all the choices we've made because that's what makes us who we are, let us forever cherish the loved ones we've lost along the way and most of all *THANK YOU FOR FAST CARS!"*

07-24-2015, 01:09 AM	#7
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Rollback! Oh my! That would make a nice hauler. I think you should buy it.

07-24-2015, 03:22 AM	#8
BC10 Senior Member Join Date: Oct 2013 Location: Bay Area, CA Posts: 493	Re: Rollback! Oh my! That looks pretty sweet. I'd buy it for that price!

07-24-2015, 09:06 AM	#9
cherokeejohn Registered User Join Date: Aug 2013 Location: Wasteminster, Maryland Posts: 409	Re: Rollback! Oh my! Do you know what kind/brand of bed it is on it? It looks like a decent buy to me, judging from the pics. I drove tow trucks for almost 6 years and by far roll-back's are my favorite. The versatility and uses are endless, and they tend to be good at making at least some of your investment $$$ back too. If it ends up in your driveway, I hope there will be a build thread. Great find! __________________ 72 C/10, LWB, 5.7, Auto, with A/C F.B.I = Full Blood Indian Appalachia/Eastern Cherokee,"Tsalagi"

07-24-2015, 10:43 AM	#11
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,165	Re: Rollback! Oh my! So does the bed move hydraulically and "roll back" or is it a fixed flatbed that you winch/drive a car up ramps? Or a dump flatbed? __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

07-24-2015, 10:51 AM	#12
cherokeejohn Registered User Join Date: Aug 2013 Location: Wasteminster, Maryland Posts: 409	Re: Rollback! Oh my! The majority of tow trucks on the eastern side of the country came from Raliegh NC. I don't remember the name of the company but I've made several trips myself down to pick up a new tow rig. They buy the cab and chassis, the utility body/beds, booms, and winch's from the factories and install, set up, and sell them right there. You can take a tour of the whole plant. They mostly use Dynamic and Jerr-Dan set ups now-a-days, but 30+ years ago there was quite a bunch more manufacturers (Holmes was a very popular brand name thru-out the 70s). There should be a small tag somewhere on the bed that will tell the info on Who, where, what it is along with the weight and hauling capacities. the tags are typically near the control area. Anyhow, if you can get some more pics of the bed a little closer I can show it to my step-brother who owns the tow/repo' business I worked for and he will probably know right away what kind it is. He's been in the business for 37 years now. It's definitely a great find! It would be a good candidate for a 8.1 liter LS swap , Maybe painted to match your 71. __________________ 72 C/10, LWB, 5.7, Auto, with A/C F.B.I = Full Blood Indian Appalachia/Eastern Cherokee,"Tsalagi"

07-24-2015, 07:45 PM	#14
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: Rollback! Oh my! That's way cool. I can't imagine hauling a car with the manual brakes. Maybe that is why they to go inspection. Back in the day. Sweet lookin' hauler!!! __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

07-25-2015, 07:49 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rollback! Oh my! Since the bed is stationary, this isn't a rollback. It's a ramp truck, or more like car hauler, since there is no dovetail and bed is level. Hodges is the big builder of this type of body in KY. Many of these beds are home made. I see this truck has the later disc brake wheels with the 9/16" stud holes. I wonder what was done there. The original studs are 7/16" and the lug nuts were flat-backed castle-type. The later wheels used a spreader ring with bevels for the chamfered lugs. I ran into this on a '70 C/30 I had that I put chrome Budds on. First I just used chrome acorn nuts, then I did a full brake job and had a machine shop bore new holes for 9/16" studs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-30-2016, 08:50 PM	#16
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Rollback! Oh my! Old post but thought I would update. We bought the truck for $3500.00! I have it at my buddies shop to get the front brakes working and carb rebuilt. Once I get it back I will start on the cosmetic stuff. I have to come up with a name for the door's also. Going to leave it just like it is for now and just get running good and water tight again. Needs all gaskets swapped out. Any thoughts. A couple of mine. Fisher Classic's Fisher's Garage Classic Towing Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-31-2016, 06:05 AM	#17
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: Rollback! Oh my! Andy's hauling not for hire __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-31-2016, 08:55 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rollback! Oh my! In the same script as on your door emblem Custom Carts, but maybe letters starting bigger to smaller ramped up to the right on an arc. Done so letters look chrome or just silver and shadowed. You could write "Fisher's" (or "Andy's") at top left in smaller script in other color, like orange or bright blue. You could put at the bottom, Upstate ~ Beach, SC __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-23-2016, 12:10 AM	#20
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Rollback! Oh my! If you up-grade the brakes,i'd go with hydroboost. I have them on my 82 hauler. Best stopping truck I've owned! Mike.



Register or Log In To remove these advertisements.

09-23-2016, 12:58 AM	#22
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Rollback! Oh my! Nice purchase! I vote for something along the lines of Pop's Hauling. With the rate your pops is buying vehicles, it won't be long before you can put her to use. Or, what were the names of the divisions that he was part of back in the day? Maybe something along those lines, pay some respect to his history. That would be pretty cool. __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 Last edited by YBNORML; 09-23-2016 at 01:15 AM.

09-23-2016, 04:10 AM	#23
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Rollback! Oh my! "Fishers Repo & Recovery" Nice score Andy! __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

09-23-2016, 08:27 AM	#24
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Re: Rollback! Oh my! Nice score!! __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

09-23-2016, 08:56 AM	#25
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Rollback! Oh my! awesome truck. Glad you were able to make it happen. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

Register or Log In To remove these advertisements.