![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2002
Location: Tullahoma, TN
Posts: 203
|
Straightening tailgates
Hey guys
Is it possible to straighten a bowed tailgate? I have found a really good tailgate with virtually no rust and just a couple of small dings for $20, but it is bowed about 1". I have heard of laying the tailgate down and running over it with a truck but I am not to sure about this. Any suggestions. Thanks, Litdave
__________________
71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
Depending on the bow it is usually possible to straighten a tailgate. I used a 150 ton press, (more force than needed) to straighten my shortstep gate. I cribbed it up so that the force was applied evenly across the bow with the ends supported and it was easy to straighten it. I believe that you can do it with a heavy vehicle, but I have not tried it. I think guys have jumped up and down to straight them, also.
Jim |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2000
Location: Brandon, SD, USA
Posts: 1,292
|
i had the same thing put it on 2 2x4s and jump on it. good luck, Ben
__________________
Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04 |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
If you screw it up, you're only out 20 bucks, and then you can make it into a cofee table for the basement!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|