Rear Drums Dragging in Reverse? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blown240 · 08-17-2015, 01:31 PM

On Friday I was driving in near 100 degree heat for about 30 mins in stop and go traffic. When I got to where I was going, I had to back into a parking spot and the brakes were dragging pretty bad. I know if the rears because the e-brake handle had lots of slack. It seemed to only be dragging in reverse.

Are my rear brakes too tight? Or is this one of those things that happens when its really hot out?

My poor truck got up to about 220 degrees, oil pressure was down, and it didn't really want to charge. Is summer over yet?

markeb01 · 08-17-2015, 02:05 PM

I'd suggest pulling the rear drums and take a look at the adjustment. See if there are self-adjusters in there that aren't set up properly.

blown240 · 08-17-2015, 02:33 PM

nothing looks odd under the drum from what I can see. I just replaced all the hardware, shoes, wheel cylinder, soft lines, etc about 3 weeks ago. I am pretty sure that it doesn't have self adjusters. Its a 61.

I drove the truck now and it seems fine. It rolls normally at an idle, and backs up ok. Its also, MUCH cooler out right now.

luvbowties · 08-19-2015, 04:50 AM

Quote:

Originally Posted by blown240

nothing looks odd under the drum from what I can see. I just replaced all the hardware, shoes, wheel cylinder, soft lines, etc about 3 weeks ago. I am pretty sure that it doesn't have self adjusters. Its a 61.

I drove the truck now and it seems fine. It rolls normally at an idle, and backs up ok. Its also, MUCH cooler out right now.

Also check to see if shorter and longer shoes are in their correct respective places--the shorter one goes to the front.
Sam

blown240 · 08-19-2015, 12:32 PM

Ill have to check that. Not sure which one is in front...

blown240 · 11-13-2015, 04:57 PM

A little update on this. Finally was able to get to a flat spot to work and pulled the drums. I have all the big shoes on the front wheels, and the small shoes on the back. Looks like Monday ill be moving shoes around....

luvbowties · 11-13-2015, 09:05 PM

Quote:

Originally Posted by blown240

A little update on this. Finally was able to get to a flat spot to work and pulled the drums. I have all the big shoes on the front wheels, and the small shoes on the back. Looks like Monday ill be moving shoes around....

Hey, my response in #4 meant that EACH WHEEL uses a short lining on its front and a longer lining on its rear. Glad you found your misplacement of the linings: now you are on the right track. Enjoy the outcome of your upcoming job well done.

Sam

luvbowties · 11-13-2015, 09:16 PM

You said, " the brakes were dragging pretty bad. I know if the rears because the e-brake handle had lots of slack." Usually, if all else is correct, lots of slack in the e-brake handle would indicate rear brakes adjusted TOO LOOSELY.
Sam

Wrenchbender Ret · 11-13-2015, 05:36 PM

Check to make sure the emergency brake cables are not too tight or sticking. If the shoes are not returning to the anchors it can cause a drag.

blown240 · 11-13-2015, 10:18 PM

Cool. Thanks Sam!

**PGSigns** · 11-15-2015, 06:19 PM

I had the pic that shows the front. Should help folks see how they go together.
Jimmy

08-17-2015, 01:31 PM	#1
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Rear Drums Dragging in Reverse? On Friday I was driving in near 100 degree heat for about 30 mins in stop and go traffic. When I got to where I was going, I had to back into a parking spot and the brakes were dragging pretty bad. I know if the rears because the e-brake handle had lots of slack. It seemed to only be dragging in reverse. Are my rear brakes too tight? Or is this one of those things that happens when its really hot out? My poor truck got up to about 220 degrees, oil pressure was down, and it didn't really want to charge. Is summer over yet? __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

08-17-2015, 02:05 PM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Rear Drums Dragging in Reverse? I'd suggest pulling the rear drums and take a look at the adjustment. See if there are self-adjusters in there that aren't set up properly. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

08-17-2015, 02:33 PM	#3
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: Rear Drums Dragging in Reverse? nothing looks odd under the drum from what I can see. I just replaced all the hardware, shoes, wheel cylinder, soft lines, etc about 3 weeks ago. I am pretty sure that it doesn't have self adjusters. Its a 61. I drove the truck now and it seems fine. It rolls normally at an idle, and backs up ok. Its also, MUCH cooler out right now. __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

08-19-2015, 12:32 PM	#5
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: Rear Drums Dragging in Reverse? Ill have to check that. Not sure which one is in front... __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

11-13-2015, 04:57 PM	#6
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: Rear Drums Dragging in Reverse? A little update on this. Finally was able to get to a flat spot to work and pulled the drums. I have all the big shoes on the front wheels, and the small shoes on the back. Looks like Monday ill be moving shoes around.... __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

11-13-2015, 09:16 PM	#8
luvbowties Registered User Join Date: Feb 2009 Location: southeasternfoothillsofusa Posts: 1,557	Re: Rear Drums Dragging in Reverse? You said, " the brakes were dragging pretty bad. I know if the rears because the e-brake handle had lots of slack." Usually, if all else is correct, lots of slack in the e-brake handle would indicate rear brakes adjusted TOO LOOSELY. Sam

11-13-2015, 05:36 PM	#9
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: Rear Drums Dragging in Reverse? Check to make sure the emergency brake cables are not too tight or sticking. If the shoes are not returning to the anchors it can cause a drag.

11-13-2015, 10:18 PM	#10
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: Rear Drums Dragging in Reverse? Cool. Thanks Sam! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

11-15-2015, 06:19 PM	#11
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Rear Drums Dragging in Reverse? I had the pic that shows the front. Should help folks see how they go together. Jimmy Attached Images __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.