|
|
|
09-09-2003, 01:20 PM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
|
Saddles
I thought I saw a post not long ago of a place to get the saddles for the rear end. I called CCP as they have a kit but won't sell the saddles by themselves. I checked with MOTHERTRUCKERS also who referred me to a local brake and spring shop. No luck there either. I just need new saddles for a coil spring setup so I can weld them on my 8.8
__________________
'68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc |
|
|
|
09-09-2003, 02:28 PM
|
#2 |
|
Registered User
Join Date: Aug 2002
Location: Kent, Wash
Posts: 53
|
Go to, www.stockcarproducts.com/
|
|
|
|
|
09-09-2003, 04:45 PM
|
#3 |
|
Registered User
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
|
I looked at these and I'm not sure they will work. Is there enough material on them as the truck trailing arms cross the axle tubes at a angle?
__________________
'68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc |
|
|
|
|
09-09-2003, 10:31 PM
|
#4 |
|
Got Horsepower?
Join Date: Sep 2003
Location: IDAHO
Posts: 406
|
Early Classic Enterprises has them for $49 a pair.
----------------------------- 71 Chevy C10 long bed- 2/4 drop--new 350, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,headers,HEI ignition,dual 2.5 inch exhaust-dynoed 448 pounds of torque @ 2300 rpm,456 pounds @3300--YEAH it will smoke the tires!!!!!!!! |
|
|
|
|
09-09-2003, 11:29 PM
|
#5 |
|
Registered User
Join Date: Aug 2002
Location: Kent, Wash
Posts: 53
|
|
|
|
|
|
09-10-2003, 12:45 AM
|
#6 |
|
Registered User
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
|
I just assumed they were generic 3" saddles. Thanks, I'll order them tomorrow. I saw they had shims there also!!!!
__________________
'68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc |
|
|
|
|
09-10-2003, 04:16 PM
|
#7 |
|
Registered User
Join Date: Jul 2002
Location: Tennessee, Morristown
Posts: 355
|
I found a set for 20.00 no tax!!!
__________________
1967 Chevy truck, R1 racing seats, 4 point racing harness, 4/6 drop, primered blue, soon to be shaved, 350- 060. over, flat top pistons, Eagle rods, Edelbrock Aluminum heads, 1.5 Scorpion roller rockers, Lunati 515" cam, mallory ignition, Holley 750 double pumper carb, Built 350 turbo trans, 2500-2800 boss hog stall, 20 gallon aluminum fuel cell!!! |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
