MA Garage/Shed Cleanout- Doors, Hood, Bedsides and More! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

patrickk1 · 09-21-2015, 10:28 AM

I bought an extra 66 c10 over the weekend for parts and need to clean out the garage/shed and get rid of any extra parts I don't need from the 66 and other parts I've gathered over the past 6 months. I would prefer not to ship any of the large stuff.

Set of Longbed fleetside bedsides with trim $400

Full shortbed fleetside bed (bed is crunched in 1 side, solid tailgate, cross sills and front panel) $SOLD

1 passenger doors and 2 drivers doors (need work, but definitely fixable) $50 each door

1 passenger door that has new skin and inner door $100

Hood (rust free, couple dents in nose panel) $175 $SOLD

L&R fender (both need a little work, but not bad) $75 each $SOLD

1966 C10 gauge cluster $65

Steering column and wheel (with harness) $75 $SOLD

1966 Grille (couple of tiny dents, very solid) $100

Tailgate (couple dents, no rot) $100 $SOLD

2 Cowl panels (rustfree) $75
5 Corner Cowl Panels (rust free, no dents) $35 each

**wcstory** · 09-21-2015, 12:23 PM

Any heater controls? Looking for a deluxe set.

patrickk1 · 09-21-2015, 02:50 PM

Quote:

Originally Posted by wcstory

Any heater controls? Looking for a deluxe set.

I do have a whole 66 deluxe heater setup with fawn controls, but I have to check my other truck to see if it has a deluxe heater setup in it. If it doesn't have the deluxe heater, I will be keeping the deluxe heater.

duallyjams · 09-21-2015, 07:56 PM

is the steering column from a 4 speed?
is it tight?
would you ship it?

patrickk1 · 09-23-2015, 10:05 AM

Quote:

Originally Posted by duallyjams

is the steering column from a 4 speed?
is it tight?
would you ship it?

Yes, It was pulled from a 4spd. As far as it being tight, I can't really tell. It's not loose or anything. I would prefer not to ship as I would have to split the steering wheel and ship separately. Are you just wanting the column and no wheel?

duallyjams · 09-23-2015, 07:21 PM

Quote:

Originally Posted by patrickk1

Yes, It was pulled from a 4spd. As far as it being tight, I can't really tell. It's not loose or anything. I would prefer not to ship as I would have to split the steering wheel and ship separately. Are you just wanting the column and no wheel?

yes just the column no wheel

patrickk1 · 09-23-2015, 10:01 AM

Quote:

Originally Posted by patrickk1

I do have a whole 66 deluxe heater setup with fawn controls, but I have to check my other truck to see if it has a deluxe heater setup in it. If it doesn't have the deluxe heater, I will be keeping the deluxe heater.

I think I am going to hold onto the heater for now. My other one has the black controls and I am not sure of the interior direction of my truck yet.

northern 85 · 09-22-2015, 05:07 AM

Interested in the gate can i get a couple more pics insrde and top edge to show straightness,Thanks.

Cypher · 09-23-2015, 03:08 PM

How much for the bed side moulding for a shortbed?

NevEno · 09-28-2015, 03:14 PM

How much for the steering wheel? ..and would you ship to 74820

Thanks
Paul

thirdfloor · 10-02-2015, 10:01 AM

can i see a pic of the bed? i'm looking for a drivers side fender and i am local

patrickk1 · 10-02-2015, 11:01 AM

Quote:

Originally Posted by thirdfloor

can i see a pic of the bed? i'm looking for a drivers side fender and i am local

Which bed and what kind of shot do you want pics of? There are multiple pics of the long bedsides and one of the short drivers side bedside (on the truck)

thirdfloor · 10-02-2015, 12:45 PM

short bed stepside drivers side. i have a long bed with spare but if its the same fender ill remove the spare.

patrickk1 · 10-02-2015, 01:23 PM

Quote:

Originally Posted by thirdfloor

short bed stepside drivers side. i have a long bed with spare but if its the same fender ill remove the spare.

I don't have any stepside parts.

thirdfloor · 10-02-2015, 01:35 PM

sorry. retarded didn't read it that well. hhahaha

Redxbob · 10-04-2015, 02:13 PM

Interested in the hood, steering column and wheel. Package deal?

duallyjams · 10-04-2015, 07:15 PM

Quote:

Originally Posted by patrickk1

Yes, It was pulled from a 4spd. As far as it being tight, I can't really tell. It's not loose or anything. I would prefer not to ship as I would have to split the steering wheel and ship separately. Are you just wanting the column and no wheel?

Quote:

Originally Posted by duallyjams

yes just the column no wheel

Quote:

Originally Posted by NevEno

How much for the steering wheel? ..and would you ship to 74820

Thanks
Paul

if you change your mind on shipping

patrickk1 · 10-05-2015, 08:05 AM

Quote:

Originally Posted by duallyjams

if you change your mind on shipping

Sold the steering column and wheel local.

patrickk1 · 10-05-2015, 08:05 AM

Quote:

Originally Posted by Redxbob

Interested in the hood, steering column and wheel. Package deal?

Hood and steering column/wheel are sold.

patrickk1 · 10-11-2015, 02:32 PM

Lowered price of the Full shortbed fleetside bed to $250, Includes tailgate (no rot, just dents), front panel (no rot except for two small sections the size of a quarter on lower lip need to be repaired), cross sills (63-66 sills), and bedsides (crunched on driver side).

Need to get it out of the garage so I can start working on the other truck.

2mas · 10-20-2015, 08:32 PM

Hey,
Do you have a rear chrome bumper for 64-66 fleet side?
I'm in Grafton, Mass..
/Thomas

patrickk1 · 10-23-2015, 07:42 AM

No bumpers, sorry.

northern 85 · 01-01-2016, 10:20 AM

Do you have the nose cone (the part the grill bolts to)??

patrickk1 · 01-01-2016, 10:25 AM

Quote:

Originally Posted by northern 85

Do you have the nose cone (the part the grill bolts to)??

Sorry, already sold.

northern 85 · 01-01-2016, 10:32 AM

How about the tailgate?

09-21-2015, 10:28 AM	#1
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Garage/Shed Cleanout- Doors, Hood, Bedsides and More! I bought an extra 66 c10 over the weekend for parts and need to clean out the garage/shed and get rid of any extra parts I don't need from the 66 and other parts I've gathered over the past 6 months. I would prefer not to ship any of the large stuff. Set of Longbed fleetside bedsides with trim $400 Full shortbed fleetside bed (bed is crunched in 1 side, solid tailgate, cross sills and front panel) $SOLD 1 passenger doors and 2 drivers doors (need work, but definitely fixable) $50 each door 1 passenger door that has new skin and inner door $100 Hood (rust free, couple dents in nose panel) $175 $SOLD L&R fender (both need a little work, but not bad) $75 each $SOLD 1966 C10 gauge cluster $65 Steering column and wheel (with harness) $75 $SOLD 1966 Grille (couple of tiny dents, very solid) $100 Tailgate (couple dents, no rot) $100 $SOLD 2 Cowl panels (rustfree) $75 5 Corner Cowl Panels (rust free, no dents) $35 each __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold) Last edited by patrickk1; 01-01-2016 at 10:25 AM.

09-21-2015, 12:23 PM	#2
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Any heater controls? Looking for a deluxe set. __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

09-21-2015, 07:56 PM	#4
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! is the steering column from a 4 speed? is it tight? would you ship it? __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-22-2015, 05:07 AM	#8
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Interested in the gate can i get a couple more pics insrde and top edge to show straightness,Thanks.

09-23-2015, 03:08 PM	#9
Cypher Registered User Join Date: Jul 2015 Location: Arleta Ca. Posts: 44	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! How much for the bed side moulding for a shortbed?

09-28-2015, 03:14 PM	#10
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! How much for the steering wheel? ..and would you ship to 74820 Thanks Paul __________________ You can find me on Instagram @neveno_cten

10-02-2015, 10:01 AM	#11
thirdfloor Registered User Join Date: Sep 2015 Location: Pawtucket, Rhode Island Posts: 29	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! can i see a pic of the bed? i'm looking for a drivers side fender and i am local

10-02-2015, 12:45 PM	#13
thirdfloor Registered User Join Date: Sep 2015 Location: Pawtucket, Rhode Island Posts: 29	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! short bed stepside drivers side. i have a long bed with spare but if its the same fender ill remove the spare.

10-02-2015, 01:35 PM	#15
thirdfloor Registered User Join Date: Sep 2015 Location: Pawtucket, Rhode Island Posts: 29	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! sorry. retarded didn't read it that well. hhahaha

10-04-2015, 02:13 PM	#16
Redxbob Registered User Join Date: Aug 2015 Location: Long island ny Posts: 42	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Interested in the hood, steering column and wheel. Package deal?

10-11-2015, 02:32 PM	#20
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Lowered price of the Full shortbed fleetside bed to $250, Includes tailgate (no rot, just dents), front panel (no rot except for two small sections the size of a quarter on lower lip need to be repaired), cross sills (63-66 sills), and bedsides (crunched on driver side). Need to get it out of the garage so I can start working on the other truck. __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold)

10-20-2015, 08:32 PM	#21
2mas Registered User Join Date: Jun 2011 Location: Sweden Posts: 126	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Hey, Do you have a rear chrome bumper for 64-66 fleet side? I'm in Grafton, Mass.. /Thomas __________________ 1965 c10 BBW LWB - Duramax 2010 Camaro SS - Whipple (721hp) 2017 Volvo V60 diesel-hybrid (233hp) 2008 volvo XC70 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=677577

10-23-2015, 07:42 AM	#22
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! No bumpers, sorry. __________________ - Patrick 1964 GMC pickup lwb ~ My newest build! 1937 Ford Coupe ~ Custom frame, LS1, quickchange 1950 Chevrolet 3100 ~ Bagged (Sold) 1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car) 1967 Chevelle ~ 454 Triple Black (Sold) 1964 Chevrolet Impala SS (Sold)

01-01-2016, 10:20 AM	#23
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! Do you have the nose cone (the part the grill bolts to)??

01-01-2016, 10:32 AM	#25
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Garage/Shed Cleanout- Doors, Hood, Bedsides and More! How about the tailgate?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.