|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-30-2015, 09:20 AM
|
#1 |
|
Registered User
Join Date: Sep 2015
Location: Louisville KY
Posts: 1
|
72 C10 Transmission information needed
I have a 1972 c10 with a 350
3. speed manual transmission that I would like to change to a 3 speed with overdrive any help |
|
|
|
09-30-2015, 10:52 AM
|
#2 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: 72 C10 Transmission information needed
3 speed auto with O/D? 700R4? 200-4R?
There is a lot of info on this in quite a few threads on here. This is a very popular swap.  Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
|
09-30-2015, 11:19 AM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
|
Re: 72 C10 Transmission information needed
The 200-4r automatic transmission is the same length, output shaft is same spline so same driveshaft will work. you will have to remove the bellhousing mounted x-member and use a x-member at the transmission, either get a floor shifter or change column from 3 OTT to an auto. then of course trans. cooling lines to the radiator and TV cable and carb bracket for the cable. I did the swap and it dropped my rpms at 55 mph from 2500 to 1900, and thats not locking up the converter.. BTW, WELCOME!!
__________________
Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
