Woohoo! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 09-12-2003, 11:23 PM

Finally got my engine to fire up, before it wouldn't even fire at all, it still runs like CRAP when it is cold, but once it warms up it runs fantasticly

I also officially started my body work -- Ground out some rust and removed half my trimming. I'm off to the paint shop tommorow to buy some primer and paint

Canadian-Ron · 09-12-2003, 11:27 PM

sweet! Glad to hear it!

Russell · 09-12-2003, 11:32 PM

Hey Ron - Were you able to find that power door switch? (the driver's side double switch and power lock switches)

Russell · 09-12-2003, 11:33 PM

Also, anyone know of an easy way to get rid of those black stickies from the trimming? or should I just grind them off?

apstguy · 09-14-2003, 03:03 AM

If you are talking about the chrome "silverado" strip, then get a rubber "eraser" wheel. Tell the auto parts guys you need it to take off pinstripes and he'll know. Works well.

Russell · 09-14-2003, 12:31 PM

Sounds good, I'll find one sometime this week.

Still can't get the engine to run while it is cold though, and I really need my truck soon as I am very likley getting a job in the very near future...

09-12-2003, 11:23 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Woohoo! Finally got my engine to fire up, before it wouldn't even fire at all, it still runs like CRAP when it is cold, but once it warms up it runs fantasticly I also officially started my body work -- Ground out some rust and removed half my trimming. I'm off to the paint shop tommorow to buy some primer and paint __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-12-2003, 11:27 PM	#2
Canadian-Ron Registered User Join Date: Sep 2003 Location: canada Posts: 43	sweet! Glad to hear it! __________________ my project........... my hell......... http://members.shaw.ca/ronmccoy/

09-12-2003, 11:32 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hey Ron - Were you able to find that power door switch? (the driver's side double switch and power lock switches) __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-12-2003, 11:33 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Also, anyone know of an easy way to get rid of those black stickies from the trimming? or should I just grind them off? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-14-2003, 03:03 AM	#5
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	If you are talking about the chrome "silverado" strip, then get a rubber "eraser" wheel. Tell the auto parts guys you need it to take off pinstripes and he'll know. Works well. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

09-14-2003, 12:31 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Sounds good, I'll find one sometime this week. Still can't get the engine to run while it is cold though, and I really need my truck soon as I am very likley getting a job in the very near future... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.