|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-04-2015, 01:32 AM
|
#1 |
|
Registered User
Join Date: Sep 2014
Location: CA
Posts: 58
|
making my own 60-62 power steering adaptor
Hello everyone.
I've been looking for an adapter for attach the power steering box to 60-62 x-frame. Then there not much information like 63-66 frame. So I decided to make one myself. Let's see what happen. |
|
|
|
10-04-2015, 08:07 AM
|
#2 |
|
Registered User
Join Date: Aug 2015
Location: Independence MO
Posts: 33
|
Re: making my own 60-62 power steering adaptor
You could build your own, but Captainfab unit is sure nice and easy to install.
Last edited by uppster; 10-04-2015 at 08:08 AM. Reason: spelling |
|
|
|
|
10-05-2015, 01:05 PM
|
#3 |
|
Registered User
Join Date: Sep 2014
Location: CA
Posts: 58
|
Re: making my own 60-62 power steering adaptor
Manual steering box before and after remove from the truck.
The 3 bolts on the chassis indicate the holes where the manual box mounted to. |
|
|
|
|
10-05-2015, 01:24 PM
|
#4 |
|
Registered User
 
Join Date: Jul 2015
Location: Milwaukie, Oregon
Posts: 115
|
Re: making my own 60-62 power steering adaptor
You can do it for sure! This is captainfabs plate FYI.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=675881 1972 C-10 SWB 1962 3/4 ton LWB 2011 GMC Sierra LML Z71 crewcab shortbed |
|
|
|
|
10-05-2015, 01:38 PM
|
#5 | |
|
Registered User
Join Date: Sep 2014
Location: CA
Posts: 58
|
Re: making my own 60-62 power steering adaptor
Quote:
I should have seen this before I did my own. |
|
|
|
|
|
10-05-2015, 01:24 PM
|
#6 |
|
Registered User
Join Date: Sep 2014
Location: CA
Posts: 58
|
Re: making my own 60-62 power steering adaptor
I use the card board to draw 2 lines with 90 degree to each other.
One line is for steering shaft line and the other line for pitman shaft line. Then I lay the old manual steering box on the card board. Make sure steering shaft and pitman shaft are lined up with the line on the card board. And mark where the pitman arm is. Also mark 3 holes for the manual steering box. |
|
|
|
|
10-05-2015, 01:31 PM
|
#7 |
|
Registered User
Join Date: Sep 2014
Location: CA
Posts: 58
|
Re: making my own 60-62 power steering adaptor
Then I do the same for Power steer box.
Power steering pitman arm is a bit shorter than manual steering pitman arm. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
