|
|
|
10-11-2015, 03:31 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Ionia, MI
Posts: 199
|
Crooked leaf springs.
I have a 51 3100 axle I am using on a custom build. I am building a tube frame so have no refrence. I bolt up my superslides meant for this axle and they are not square with the front axle.
I have the bolts loose and can wiggle the springs a bit. The closest I can get them is with the rear 29.5 outside eye to outside eye and the front is 27.25 outside eye to outside eye. Is this right?
__________________
1991 Metro commuter 1991 s10 future project truck 1987 V10 backup daily/junk truck 1985 K20 Winter beater 1991 R30(squarebody) c/c flatbed towrig 1994 s10 80"wb custom build |
|
|
|
10-11-2015, 03:40 PM
|
#2 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: Crooked leaf springs.
I don't have an AD assembly manual, but looking at this from the specifications manual the bottom center sketch seems to show the springs following the inward taper of the frame. Maybe some one with a FAM can get you the exact dimensions.
http://chevy.oldcarmanualproject.com...esto/51124.htm
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
