CA 1969 GMC Longhorn Custom Camper Part Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 10-19-2015, 11:44 AM

One owner 72k truck....unfortunately lived its life a little too close to the ocean as there is good rust from the top...i.e. top of fenders, cab drip rails, above windshield, etc. The bed is really nice on the exterior as the camper has been on it the since shortly after purchase. The interior of the bed is beautiful, the wood is still in white paint (black in the pictures is from the backing of the indoor/outdoor carpet and wipes off) and the wheel tubs and header look excellent! The early take off back window w/ rubber seal are in a separate post...as will be the tailgate. I would like to sell the bed complete, for all you Longhorn guys out there... $550.
It has a 350/350 that is complete, I will be trying to get it started and then decide from there if it will be parted or not.
Everything else is available,

Auxiliary battery tray $125 shipped
Front Bumper $75 + the ride

Please posthere for anything else you may need..I will post pics and prices here in the thread.

Thanks
Adam
951-544-0721

**1968k20** · 10-19-2015, 12:12 PM

Glove box door and eyebrows shipped to 96020 please. Located in norcal

budnikguy · 10-20-2015, 11:21 AM

Eye brows are straight. but would need to be re-chromed. Are you still interested?! lmk.

Quote:

Originally Posted by 1968k20

Glove box door and eyebrows shipped to 96020 please. Located in norcal

**MidLifer** · 10-19-2015, 01:49 PM

How much for the column shipped to 08057?

budnikguy · 10-20-2015, 11:32 AM

$125 shipped the the right coast....

Quote:

Originally Posted by MidLifer

How much for the column shipped to 08057?

BLT gmc · 10-19-2015, 01:57 PM

Air filter shipped to 51555
Posted via Mobile Device

**davischevy** · 10-19-2015, 02:38 PM

How much for all the side moldings, upper and lower. What kind of shape are the hubcaps in? Are they chrome or stainless?

Shipped to 72601

**davischevy** · 10-19-2015, 02:42 PM

What kind of shape are the wing vents? How much?

budnikguy · 10-20-2015, 11:39 AM

Will take a closer look for you on Thursday....

Quote:

Originally Posted by davischevy

What kind of shape are the wing vents? How much?

budnikguy · 10-20-2015, 11:36 AM

$135 for the complete trim upper and lower plus the ride. Based upon the spid, they were chrome and have weathered to what you see now, only 3 are present, one has a small crack on the inner mount portion of it. lmk

Quote:

Originally Posted by davischevy

How much for all the side moldings, upper and lower. What kind of shape are the hubcaps in? Are they chrome or stainless?

Shipped to 72601

**davischevy** · 10-20-2015, 04:10 PM

Quote:

Originally Posted by budnikguy

$135 for the complete trim upper and lower plus the ride. Based upon the spid, they were chrome and have weathered to what you see now, only 3 are present, one has a small crack on the inner mount portion of it. lmk

Does the trim have any extra holes?

**davischevy** · 10-20-2015, 06:30 PM

Quote:

Originally Posted by davischevy

Does the trim have any extra holes?

Get me a price shipped to 72601 on the upper and lower trim moldings.

I will pass on the hubcaps.

budnikguy · 10-27-2015, 05:18 PM

I looked over and started removing all of the trim...there are no extra holes. And they seem to be very straight. Let me know if you are interested. Thank you.

Quote:

Originally Posted by davischevy

Does the trim have any extra holes?

budnikguy · 02-08-2016, 09:17 PM

Not sure you are still looking, but, the complete trim upper and lower is removed and can be packaged and shipped. LMK as I will then post separately if you no longer need. Thank you

Quote:

Originally Posted by davischevy

How much for all the side moldings, upper and lower. What kind of shape are the hubcaps in? Are they chrome or stainless?

Shipped to 72601

**davischevy** · 02-08-2016, 09:49 PM

How much for the side moldings shipped to 72601?

Thanks
Larry

budnikguy · 10-20-2015, 11:33 AM

Not ready to part engine components yet...

Quote:

Originally Posted by BLT gmc

Air filter shipped to 51555
Posted via Mobile Device

718jwh · 10-19-2015, 03:27 PM

Quote:

Originally Posted by budnikguy

One owner 72k truck....unfortunately lived its life a little too close to the ocean as there is good rust from the top...i.e. top of fenders, cab drip rails, above windshield, etc. The bed is really nice on the exterior as the camper has been on it the since shortly after purchase. The interior of the bed is beautiful, the wood is still in white paint (black in the pictures is from the backing of the indoor/outdoor carpet and wipes off) and the wheel tubs and header look excellent! The early take off back window w/ rubber seal are in a separate post...as will be the tailgate. I would like to sell the bed complete, for all you Longhorn guys out there... $550.
It has a 350/350 that is complete, I will be trying to get it started and then decide from there if it will be parted or not.
Everything else is available,

Auxiliary battery tray $125 shipped
Front Bumper $75 + the ride

Please posthere for anything else you may need..I will post pics and prices here in the thread.

Thanks
Adam
951-544-0721

Posted via Mobile Device

718jwh · 10-19-2015, 03:28 PM

How much for complete heater A/C shipped to 60563 Thanks
Posted via Mobile Device

budnikguy · 10-20-2015, 11:42 AM

How complete? lmk, thanks

Quote:

Originally Posted by 718jwh

How much for complete heater A/C shipped to 60563 Thanks
Posted via Mobile Device

**DeadheadNM** · 10-19-2015, 04:28 PM

Interested in the radiator (4-row?), compete aux batt harness (w rad support clips, j-blocks), the chrome a/c vent, and the interior cab light pending cost/condition - thanks. Pete

budnikguy · 10-20-2015, 11:23 AM

I will check on this for you, on my next truck day...Thursday

Quote:

Originally Posted by DeadheadNM

Interested in the radiator (4-row?), compete aux batt harness (w rad support clips, j-blocks), the chrome a/c vent, and the interior cab light pending cost/condition - thanks. Pete

**DeadheadNM** · 10-27-2015, 07:56 PM

Quote:

Originally Posted by DeadheadNM

Interested in the radiator (4-row?), compete aux batt harness (w rad support clips, j-blocks), the chrome a/c vent, and the interior cab light pending cost/condition - thanks. Pete

Just checking back - thanks, Pete

**Cash3481** · 10-27-2015, 08:51 PM

Adam,
Sorry I must have lost the subscription on this thread. I'm still interested in the mirror arms that go down on door shippedto 67110.
Mike

budnikguy · 10-27-2015, 10:22 PM

No problem..I will get them taken apart shortly and post pics...

Quote:

Originally Posted by Cash3481

Adam,
Sorry I must have lost the subscription on this thread. I'm still interested in the mirror arms that go down on door shippedto 67110.
Mike

1968aj · 10-27-2015, 10:41 PM

still interested in mirrors

10-19-2015, 11:44 AM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	1969 GMC Longhorn Custom Camper Part Out One owner 72k truck....unfortunately lived its life a little too close to the ocean as there is good rust from the top...i.e. top of fenders, cab drip rails, above windshield, etc. The bed is really nice on the exterior as the camper has been on it the since shortly after purchase. The interior of the bed is beautiful, the wood is still in white paint (black in the pictures is from the backing of the indoor/outdoor carpet and wipes off) and the wheel tubs and header look excellent! The early take off back window w/ rubber seal are in a separate post...as will be the tailgate. I would like to sell the bed complete, for all you Longhorn guys out there... $550. It has a 350/350 that is complete, I will be trying to get it started and then decide from there if it will be parted or not. Everything else is available, Auxiliary battery tray $125 shipped Front Bumper $75 + the ride Please posthere for anything else you may need..I will post pics and prices here in the thread. Thanks Adam 951-544-0721

10-19-2015, 12:12 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1969 GMC Longhorn Custom Camper Part Out Glove box door and eyebrows shipped to 96020 please. Located in norcal

10-19-2015, 01:49 PM	#4
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 1969 GMC Longhorn Custom Camper Part Out How much for the column shipped to 08057?

10-19-2015, 01:57 PM	#6
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: 1969 GMC Longhorn Custom Camper Part Out Air filter shipped to 51555 Posted via Mobile Device

10-19-2015, 02:38 PM	#7
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,881	Re: 1969 GMC Longhorn Custom Camper Part Out How much for all the side moldings, upper and lower. What kind of shape are the hubcaps in? Are they chrome or stainless? Shipped to 72601 __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. Last edited by davischevy; 10-19-2015 at 02:40 PM. Reason: added zip

10-19-2015, 02:42 PM	#8
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,881	Re: 1969 GMC Longhorn Custom Camper Part Out What kind of shape are the wing vents? How much? __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

02-08-2016, 09:49 PM	#15
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,881	Re: 1969 GMC Longhorn Custom Camper Part Out How much for the side moldings shipped to 72601? Thanks Larry __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

10-19-2015, 03:28 PM	#18
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: 1969 GMC Longhorn Custom Camper Part Out How much for complete heater A/C shipped to 60563 Thanks Posted via Mobile Device

10-19-2015, 04:28 PM	#20
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,483	Re: 1969 GMC Longhorn Custom Camper Part Out Interested in the radiator (4-row?), compete aux batt harness (w rad support clips, j-blocks), the chrome a/c vent, and the interior cab light pending cost/condition - thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-27-2015, 08:51 PM	#23
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 1969 GMC Longhorn Custom Camper Part Out Adam, Sorry I must have lost the subscription on this thread. I'm still interested in the mirror arms that go down on door shippedto 67110. Mike __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

10-27-2015, 10:41 PM	#25
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: 1969 GMC Longhorn Custom Camper Part Out still interested in mirrors



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.