61 to 62-66 hood?

[crossy]

looked at a 62 tonight that is titled as such, but has the 60-61 hood on it. says it was ALWAYs that way and I know that can happen back in those days if it was a 'leftover'. The hood is rusted anyway and I prefer the 62-66 design so is it just a matter of changing the hood? thanx . crossy

[markeb01]

Yep, it's just a matter of bolting it on. You will require the hood release latch that goes with the later hood. It has the handle going side ways in the hood opening, where the 60-61 hood has the handle facing down into the area under the hood.

[Brad54]

Originally Posted by markeb01

Yep, it's just a matter of bolting it on. You will require the hood release latch that goes with the later hood. It has the handle going side ways in the hood opening, where the 60-61 hood has the handle facing down into the area under the hood.

That's really interesting.
My Suburban in my avatar is actually a '62, and I put '60 grill and '60/'61 hood on it, and just bolted the hood on, not doing anything with the latch.
Drove it for years without a problem. (until the deer restyled the whole front of the truck for me).

-Brad

[markeb01]

The new 1960 hood came with the correct latch installed in the hood. That release handle points straight down. The 1962-66 hood release handle points toward the drivers side and is accessed in the opening in the front of the hood. I dealt with all this when I swapped my 1960 GMC hood over to a 62-66 Chevy version.

[Brad54]

Ah. That makes sense.
I've read some posts that said you have to change the part of the latch on the grill support too, but I didn't have to.
-Brad

[61K10]

even though the latches are different, some say the pin is shorter. maybe only 1960. my 61 came with a 62-66 hood on it. I replaced it with a 61 hood and didn't change anything.

[ImpalaJim]

Edited by Forum Staff
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[chicken]

Edited by Forum Staff
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[ImpalaJim]

Originally Posted by ImpalaJim

Edited by Forum Staff
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

good lord all I said was I wanted and couldn't find 1 wtf classified is that ????

I'm starting to think to many chiefs not enough engines

[chevy_mike]

Originally Posted by ImpalaJim

good lord all I said was I wanted and couldn't find 1 wtf classified is that ????

I'm starting to think to many chiefs not enough engines

Because as a non supporting member, you cannot ask that you want to buy. You can ask what vendors sell a hood. The answer to that is none, they are not reproduced. Craigslist is your best bet.

[ImpalaJim]

And if I would or could afford the shipping on such a pc. shesh

[ImpalaJim]

and tell me all the ebay and craigs list stupid links are legit I'm getting real sick of those! and like I said 2 many chiefs. You are the second one to chime in. Do I hear a 3rd? over moderated like every other hobby site on this stupid net!! Id be more then happy to pay but I haven't seen a thing on here worth paying for yet. And I'm still looking for a hood btw Oh I didn't mention Id like to find a 64 66 larger truck grill as well

[chevy_mike]

Originally Posted by ImpalaJim

and tell me all the ebay and craigs list stupid links are legit I'm getting real sick of those! and like I said 2 many chiefs. You are the second one to chime in. Do I hear a 3rd? over moderated like every other hobby site on this stupid net!! Id be more then happy to pay but I haven't seen a thing on here worth paying for yet. And I'm still looking for a hood btw Oh I didn't mention Id like to find a 64 66 larger truck grill as well

Congrats on becoming a supporting member. Post up in the Want to Buy classified area and hopefully someone can help you out. As for the craigslist/eBay stuff, at this point if they are not the original poster items they are allowed per forum rules.

If you were in the San Diego area, there is a local guy that's on craigslist who likely have a hood.

Good luck.

[Liz]

Originally Posted by ImpalaJim

and tell me all the ebay and craigs list stupid links are legit I'm getting real sick of those! and like I said 2 many chiefs. You are the second one to chime in. Do I hear a 3rd? over moderated like every other hobby site on this stupid net!! Id be more then happy to pay but I haven't seen a thing on here worth paying for yet. And I'm still looking for a hood btw Oh I didn't mention Id like to find a 64 66 larger truck grill as well

Number 3 chiming in. If you have any further questions, feel free to message me direct. Otherwise please respect the staff, they have enough stuff to deal with outside of HS drama
Thanks again!

[The Rocknrod]

No hood for you - Next!

[ImpalaJim]

lol