Has anyone used LED tails & markers from LMC? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jfalesi · 11-12-2015, 01:18 PM

I'm wondering what the quality is like.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=99

Thanks,
-Jamie

KY_GMC · 11-12-2015, 02:15 PM

I picked up the complete kit from Classic Industries and they seem to be good quality. The back side of the circuit board was completely sealed and they come complete with the outer lens. They are quite bright.

Name: IMG_1878.jpg
Views: 412
Size: 38.0 KB

Name: IMG_1878.jpg
Views: 412
Size: 38.0 KB

You will also have to get an electronic flasher to make these work properly. This is the one that I got.

Amazon.com: CEC Industries EF32RL Electronic Turn...

I also put LED bulbs in the front turn signals so the flasher is a necessity since there is virtually no load.

Robznob11 · 11-12-2015, 10:23 PM

My hand made ones look better. Lol jkjk. Check out my threads.. the housing is sealed already so that's kinda over kill. I'm sure those are good but I don't like only half lit. My reverse lights will blind ya...

jfalesi · 11-14-2015, 02:53 PM

Nice. Any interest in making a Burb set?

Quote:

Originally Posted by Robznob11

My hand made ones look better. Lol jkjk. Check out my threads.. the housing is sealed already so that's kinda over kill. I'm sure those are good but I don't like only half lit. My reverse lights will blind ya...

Robznob11 · 11-14-2015, 03:28 PM

I can make them. I just need a pattern. Not sure how much difference in the shape of the tail. Pm me we can work it out

Robznob11 · 11-14-2015, 11:08 PM

Quote:

Originally Posted by jfalesi

Nice. Any interest in making a Burb set?

As far as I can tell the tail board should work. Just need a measurement of the square for reverse lights.

jfalesi · 11-23-2015, 03:01 PM

Quote:

Originally Posted by Robznob11

As far as I can tell the tail board should work. Just need a measurement of the square for reverse lights.

OK, I'll get you some measurements. The LEDs on the tail board may need to be aimed downward - the Burb back end is raked by a few degrees.

71meangreenc10 · 11-14-2015, 10:22 PM

I have the 37-0341's from LMC and they have worked well and have been on the truck for years. The side marker lights I got from a vendor in KY and they already have blown LED's. Tails are great, side markers, not so much......

Smitty

11-12-2015, 01:18 PM	#1
jfalesi Junior Member Join Date: Jul 2006 Location: Delran, NJ Posts: 458	Has anyone used LED tails & markers from LMC? I'm wondering what the quality is like. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=99 Thanks, -Jamie

11-12-2015, 02:15 PM	#2
KY_GMC Registered User Join Date: Dec 2012 Location: Fort Thomas, KY Posts: 300	Re: Has anyone used LED tails & markers from LMC? I picked up the complete kit from Classic Industries and they seem to be good quality. The back side of the circuit board was completely sealed and they come complete with the outer lens. They are quite bright. You will also have to get an electronic flasher to make these work properly. This is the one that I got. Amazon.com: CEC Industries EF32RL Electronic Turn... I also put LED bulbs in the front turn signals so the flasher is a necessity since there is virtually no load. __________________ 1972 GMC 1500 Super Custom, 383 Stoker, TH350 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=592157 Engine Thread http://67-72chevytrucks.com/vboard/s...d.php?t=592233

11-12-2015, 10:23 PM	#3
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Has anyone used LED tails & markers from LMC? My hand made ones look better. Lol jkjk. Check out my threads.. the housing is sealed already so that's kinda over kill. I'm sure those are good but I don't like only half lit. My reverse lights will blind ya... __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

11-14-2015, 03:28 PM	#5
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Has anyone used LED tails & markers from LMC? I can make them. I just need a pattern. Not sure how much difference in the shape of the tail. Pm me we can work it out __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

11-14-2015, 10:22 PM	#8
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Has anyone used LED tails & markers from LMC? I have the 37-0341's from LMC and they have worked well and have been on the truck for years. The side marker lights I got from a vendor in KY and they already have blown LED's. Tails are great, side markers, not so much...... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.