CA SBC Performance Parts

[cleszkie]

Clearing out some space in the garage, and the following items are up for sale:

- Edelbrock Performer intake manifold: EDL-2101, about 100k+ miles on it, dirty but still good to go - $30/obo SOLD

- SBC long water pump: No markings cast into pump, new not remanufactured, came on my new crate motor, only used during break-in and dyno testing - $20/obo SOLD

- Melling high volume oil pump: MEL-M55HV, used for approx 560 miles, comes with pick up (MEL-55-S1), steel intermediate shaft (MEL-IS-55E), and mounting bolt - $20/obo SOLD

- Mallory HEI distributor: Comes with MSD "Heat Module" installed (MSD-83647), about 50k+ miles on dizzy, about 560 miles on Heat module - $90/obo

- Mallory Unilite distributor: MAA-4748201H, comes with Mallory coil and Mallory inline surge protector, approx 50k+ miles on dizzy - $50/obo SOLD

- Edelbrock Cam Kit: EDL 2102, comes with lifters but they are not labeled, cam only run for 100 miles. When cam was installed one of the cam gear bolts was over-torqued and sheared off. New cam was ordered and swapped in. Sheared off bolt still in cam but could be removed with a little elbow grease - $50/obo SOLD

- TRW Performance cam: TP 174, Mild performance cam (see spec card below), 100k+ miles on it, very little wear - $15/obo SOLD

- Mickey Thompson cast aluminum valve covers: #103R-50B, clear powdercoat, no oil baffles, but they can be ordered - $50/obo SOLD

All parts are in good working order. Not trying to sell off faulty or broken junk to fellow board members. I can provide additional pictures upon request. Please keep all correspondance within this thread. No PM side bars please. All prices do not include shipping. Thanks.

[cleszkie]

More pics

[cleszkie]

Again more

[cleszkie]

Last pics

[cleszkie]

Last two

[ScottH]

interested in the Mallory Unilite distributor, would u do $50 shipped?

[1968k20]

I will take the water pump,oil pump, and try cam. Will you do $75 shipped to NE Ca?

[leuggy]

are the mt valve covers tall or short and are there any cracks in the casing down around the bolt holes maybe some closer pics of that area

Blaine

[1968k20]

Meant to say TRW cam

[cleszkie]

Originally Posted by ScottH

interested in the Mallory Unilite distributor, would u do $50 shipped?

ScottH - How does $60 shipped sound?

Originally Posted by 1968k20

I will take the water pump,oil pump, and try cam. Will you do $75 shipped to NE Ca?

1968k20 - I will take $75 shipped for the water pump, oil pump, and TRW cam. But I want to make sure you know the combined cost of the parts is only $55 and you are giving me another $20 for shipping. Its a fair deal considering the weight of the parts, but I want to be sure you didn't make a typo You will like the cam. TRW no longer makes that grind, but it was a pretty popular hop up when I installed it. If all is kosher, send payment to my Paypal account at cpleszkiewicz@yahoo.com.

Originally Posted by leuggy

are the mt valve covers tall or short and are there any cracks in the casing down around the bolt holes maybe some closer pics of that area

Blaine

Blaine - I believe they are the short version. But they are taller than the stock covers. No cracks at the mounting flanges. I will post some more pics of that area in a bit. I will also get the part number off them so you can double check if they are tall or short.

[leuggy]

Originally Posted by cleszkie

ScottH - How does $60 shipped sound?




1968k20 - I will take $75 shipped for the water pump, oil pump, and TRW cam. But I want to make sure you know the combined cost of the parts is only $55 and you are giving me another $20 for shipping. Its a fair deal considering the weight of the parts, but I want to be sure you didn't make a typo You will like the cam. TRW no longer makes that grind, but it was a pretty popular hop up when I installed it. If all is kosher, send payment to my Paypal account at cpleszkiewicz@yahoo.com.



Blaine - I believe they are the short version. But they are taller than the stock covers. No cracks at the mounting flanges. I will post some more pics of that area in a bit. I will also get the part number off them so you can double check if they are tall or short.

if they have no cracks I would like to buy them and get shipped to my brother in Washington state
Blaine

[72c105speed]

Edelbrock 2101 cam shipped price to 41018?

[cleszkie]

Originally Posted by 72c105speed

Edelbrock 2101 cam shipped price to 41018?

72c105speed - How does $65 sound? It is heavy.

[cleszkie]

Originally Posted by leuggy

if they have no cracks I would like to buy them and get shipped to my brother in Washington state
Blaine

Blaine - The part number on the valve covers is "103R-50B". See below for requested pictures:

[cleszkie]

More valve cover pics. Valve cover bolts and hold downs included.

[1968k20]

I figured shipping might cost close to $20. I will pp you when I get home late afternoon. Thank you very much!

[afcamaro]

What kinda deal would you make for the intake and valve covers shipped to 66605? Thank you

[cleszkie]

Originally Posted by 1968k20

I figured shipping might cost close to $20. I will pp you when I get home late afternoon. Thank you very much!

1968k20 - You are welcome Sir.

Originally Posted by afcamaro

What kinda deal would you make for the intake and valve covers shipped to 66605? Thank you

afcamaro - How does $90 shipped sound?

[1968k20]

$75 sent

[ScottH]

60 sounds fine, pm me payment info please.

thanks

[afcamaro]

If the valve covers are not sold id take them and the intake. Would be interested in the uni-lite as well.

[bpatrol]

i will take the edelbrock manifold and cam kit shipped to 79938. if shipping is reasonable.
total for the stuff?
thanks phillip

[bpatrol]

Yes? No?sold?

[cleszkie]

I have a lot of people asking what something would cost shipped and then not replying back when I give a cost. I also have people contacting me via PM. Please let me know if you are good with a shipping cost within a reasonable time, and do not use my PM to make offers. It is making it hard to determine who has priority over a part.

[cleszkie]

OK. The following is how I see the order of dibs on the parts:

afcamaro -

You have dibs on the intake manifold and Unilite. You didn't commit to any of the parts, so I gave dibs on the valve covers to the next person that said they wanted them. $100 shipped.

leuggy -

You said you wanted the valve covers, so I took that as a commitment. They are yours if you want them. $65 shipped.

72c105speed -

You never responded to my response on shipping of the cam, so you got passed up.

Undone -

The cam kit is your if you want it. However, I cannot do $60 with shipping. Shipping is becoming more expensive than I first thought it would be. I would have to have $65 with shipping, same as I offered to the previous person.

bpatrol -

There are people in front of you on both the intake and cam. You are first in line on both of these if the deals fall through.

If anyone feels like they got skipped over or wronged, I apologize. But the order of dibs on parts that I provided above is the best I can assume from the e-mails I have recieved in this thread.