1964 Chevy K10 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sampsmit000 · 12-05-2015, 02:00 AM

This is my factory 4x4 K10 Chevy that I am restoring. It is a short wheel base, fleet side, and has a big window. These are pictures of what I have done on it so far. I have since blasted the bed as well.

sampsmit000 · 12-05-2015, 02:02 AM

More Pictures

dodgiesdad · 12-05-2015, 06:56 AM

Good looking progress! I love the look you have going. What are your plans?

sampsmit000 · 12-05-2015, 11:33 AM

Quote:

Originally Posted by dodgiesdad

Good looking progress! I love the look you have going. What are your plans?

Since it is already not original, my plan is to give it a classic look but with some modern commodities. I am going to put a/c and have moved the gas tank to the back. The engine is a rebuild 350 and has 411hp. My hope is to get it done by summer, but I really have no deadline.
Posted via Mobile Device

Mathew21 · 12-05-2015, 11:47 AM

Great work. Keep us updated with the progress.

dodgiesdad · 12-06-2015, 12:29 AM

Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

sampsmit000 · 12-06-2015, 12:37 AM

Quote:

Originally Posted by dodgiesdad

Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

I am doing a two tone color. Either Red and White. Or that sort of turquoise color but a little more green and white and a gray interior

63 & 64 Bowties · 12-07-2015, 11:26 AM

Quote:

Originally Posted by dodgiesdad

You should consider starting a thread in the "Projects and Builds section".

I just moved this one into the Projects & Builds area for him.

sampsmit000 · 12-07-2015, 12:26 PM

Quote:

Originally Posted by 63 & 64 Bowties

I just moved this one into the Projects & Builds area for him.

Thanks. Didn't know how to move it!
Posted via Mobile Device

Bodhi · 12-06-2015, 09:54 PM

Looking great Boss!

**66ChevyMax** · 12-07-2015, 01:52 PM

Great start!

sampsmit000 · 12-07-2015, 06:17 PM

Here's my work from last night. Trying to get the bed ready for paint then put it away and work on the cab and front clip.

TJ's Chevy · 12-27-2015, 11:59 PM

I'm late joining the party, but sweet truck man!

62stepside longbox · 12-28-2015, 02:52 AM

Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics!

sampsmit000 · 12-28-2015, 02:54 AM

Quote:

Originally Posted by 62stepside longbox

Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics!

I'm going to chrome it and see how I like it! That is something that is simple to Change once I'm done if I want too!
Posted via Mobile Device

schpeen · 01-04-2016, 01:12 PM

coming along beautifully

following

sampsmit000 · 01-04-2016, 01:14 PM

Thanks

TJ's Chevy · 01-04-2016, 02:02 PM

Yeah, I know the feeling. lol I'm doing school and working afternoons to evenings plus Saturdays so I have a super tight schedule. lol Then I work full time during the summer when school gets out and less weekends so I finally have 2 days to work on the truck.

61K10 · 01-04-2016, 02:17 PM

looks like you are doing a nice job. wait till you get primer on and it will show all the little places that need a little more work lol. don't you just sanding--------

sampsmit000 · 01-04-2016, 02:28 PM

Quote:

Originally Posted by 61K10

looks like you are doing a nice job. wait till you get primer on and it will show all the little places that need a little more work lol. don't you just sanding--------

Yes I think it looks and feels good now but I bet when I get primer down I will be very surprised of how much I have missed!
Posted via Mobile Device

sampsmit000 · 01-08-2016, 12:18 AM

Finally able to get out and work for a few hours. Fixed a rusted out corner in the driver side door. I popped the spot welds out in the corner, then cut out the outer door skin. Then I cut out the inner part of it. I have a donor door so I did the exact same thing on the donor door and took the inner part and welded that in. Then I welded the outer skin from the donor on the door. Finally I bent the folds that were spot welded back over and welded those. Not being able to work on her is killing me! We need more hours in the day!

sampsmit000 · 01-08-2016, 12:19 AM

02

62stepside longbox · 01-08-2016, 11:27 PM

Lookin good Mitch! I'm in the process of doing the same thing. It may take many hours but it'll be worth it in the end

**aotte1** · 01-09-2016, 12:29 AM

Lots of progress bing made, it all takes time on these older trucks. You will have a great truck when done, not many 4x4 still around. Have spent time in Ogden, family their.

L

j.kirn · 01-17-2016, 09:07 PM

Quote:

Originally Posted by aotte1

Lots of progress bing made, it all takes time on these older trucks. You will have a great truck when done, not many 4x4 still around. Have spent time in Ogden, family their.

L

lots of these kind of 4bys around

12-05-2015, 02:00 AM	#1
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	1964 Chevy K10 Build This is my factory 4x4 K10 Chevy that I am restoring. It is a short wheel base, fleet side, and has a big window. These are pictures of what I have done on it so far. I have since blasted the bed as well. Attached Images

12-05-2015, 02:02 AM	#2
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build More Pictures Attached Images

12-05-2015, 06:56 AM	#3
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 1964 Chevy K10 Build Good looking progress! I love the look you have going. What are your plans?

12-05-2015, 11:47 AM	#5
Mathew21 Registered User Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: 1964 Chevy K10 Build Great work. Keep us updated with the progress. __________________ It only has original paint once

12-06-2015, 12:29 AM	#6
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 1964 Chevy K10 Build Agree with the "keep us updated". You should consider starting a thread in the "Projects and Builds section". I am doing a very similar build on mine. What color(s) are you going to be using?

12-06-2015, 09:54 PM	#10
Bodhi Registered User Join Date: Oct 2014 Location: Tennessee Posts: 11	Re: 1964 Chevy K10 Build Looking great Boss! __________________ 1982 Chevy K20 350 Small Block 700r4 Trans 3/4 Ton Axles 35" BF Goodrich

12-07-2015, 01:52 PM	#11
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 1964 Chevy K10 Build Great start! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

12-07-2015, 06:17 PM	#12
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build Here's my work from last night. Trying to get the bed ready for paint then put it away and work on the cab and front clip. Attached Images

12-27-2015, 11:59 PM	#13
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 Chevy K10 Build I'm late joining the party, but sweet truck man! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-28-2015, 02:52 AM	#14
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1964 Chevy K10 Build Nice truck, are you planning on keeping the 60 grille? Keep us updated on what your doing to the truck and we like pics! __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

01-04-2016, 01:12 PM	#16
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: 1964 Chevy K10 Build coming along beautifully following

01-04-2016, 01:14 PM	#17
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Thanks

01-04-2016, 02:02 PM	#18
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 Chevy K10 Build Yeah, I know the feeling. lol I'm doing school and working afternoons to evenings plus Saturdays so I have a super tight schedule. lol Then I work full time during the summer when school gets out and less weekends so I finally have 2 days to work on the truck. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-04-2016, 02:17 PM	#19
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 1964 Chevy K10 Build looks like you are doing a nice job. wait till you get primer on and it will show all the little places that need a little more work lol. don't you just sanding-------- __________________ 1961 chevy K10 my build is------------61K10 build

01-08-2016, 12:18 AM	#21
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build Finally able to get out and work for a few hours. Fixed a rusted out corner in the driver side door. I popped the spot welds out in the corner, then cut out the outer door skin. Then I cut out the inner part of it. I have a donor door so I did the exact same thing on the donor door and took the inner part and welded that in. Then I welded the outer skin from the donor on the door. Finally I bent the folds that were spot welded back over and welded those. Not being able to work on her is killing me! We need more hours in the day! Attached Images __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson



Register or Log In To remove these advertisements.

01-08-2016, 12:19 AM	#22
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 1964 Chevy K10 Build 02 Attached Images __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

01-08-2016, 11:27 PM	#23
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1964 Chevy K10 Build Lookin good Mitch! I'm in the process of doing the same thing. It may take many hours but it'll be worth it in the end __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

01-09-2016, 12:29 AM	#24
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 1964 Chevy K10 Build Lots of progress bing made, it all takes time on these older trucks. You will have a great truck when done, not many 4x4 still around. Have spent time in Ogden, family their. L

Register or Log In To remove these advertisements.