TN Cab Pieces/Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DPowers** · 12-06-2015, 10:14 PM

Bare cab would be $100.00.
Going to take this cab to scrap in the near future. If there are any patch pieces that someone may be able to use, let me know. Patches will start at $10.00.

pimpston65 · 12-06-2015, 10:33 PM

Quote:

Originally Posted by DPowers

Bare cab would be $100.00.
Going to take this cab to scrap in the near future. If there are any patch pieces that someone may be able to use, let me know. Patches will start at $10.00.

how are the floors? I need the whole firewall section down to and including the floor pans

Mikes66ChevyC10 · 12-06-2015, 10:37 PM

If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!!

**DPowers** · 12-06-2015, 10:45 PM

[QUOTE=Mikes66ChevyC10;7401045]If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!!

Best I can tell it is still good, but will have to take a closer look.

Mikes66ChevyC10 · 12-06-2015, 10:50 PM

[quote=DPowers;7401057]

Quote:

Originally Posted by Mikes66ChevyC10

If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!!

Best I can tell it is still good, but will have to take a closer look.

It does look good in that picture. Let me know after you take a closer look no rush. If it is good PM me with a price if your willing to remove it. Thanks again.

**DPowers** · 12-20-2015, 09:12 PM

Quote:

Originally Posted by Mikes66ChevyC10

If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!!

So a section like this is what you need?

Mikes66ChevyC10 · 12-20-2015, 09:16 PM

Quote:

Originally Posted by DPowers

So a section like this is what you need?

Yep looks good to me.

**DPowers** · 12-20-2015, 09:24 PM

Quote:

Originally Posted by Mikes66ChevyC10

Yep looks good to me.

Ok I will cut it out. How would $15 plus whatever shipping would be?

Mikes66ChevyC10 · 12-20-2015, 09:30 PM

Quote:

Originally Posted by DPowers

Ok I will cut it out. How would $15 plus whatever shipping would be?

Sounds good to me. Thanks again for doing this. This spot is the last area of rust on the cab that needs to be fixed then all the rust repair is done!

**DPowers** · 12-06-2015, 10:38 PM

Floors are not rusted through as best I can remember, but will have to get some pics.

pimpston65 · 12-07-2015, 12:16 AM

Quote:

Originally Posted by DPowers

Floors are not rusted through as best I can remember, but will have to get some pics.

I can always come to you and help you cut out what I need...

pimpston65 · 12-07-2015, 12:56 AM

I need all this...

pimpston65 · 12-07-2015, 12:57 AM

with this part still attached...

**DPowers** · 12-06-2015, 10:52 PM

Probably be next weekend before I can get back to the truck.

LostMy65 · 12-06-2015, 11:01 PM

I need two of these cab mounting washers:

LostMy65 · 12-21-2015, 02:44 AM

Quote:

Originally Posted by LostMy65

I need two of these cab mounting washers:

I only need the washer with the cupping. The washer in the square cut area there. I need two of them.

**DPowers** · 12-27-2015, 09:56 PM

Quote:

Originally Posted by LostMy65

I need two of these cab mounting washers:

Checked todaY. The ones on the cab were toast.

**DPowers** · 12-06-2015, 11:04 PM

Lostmy65 You gotta give me a better clue... the whole area?

sampsmit000 · 12-06-2015, 11:58 PM

Is the hump still available?

jamesrussell26 · 12-07-2015, 11:11 AM

Ill take whole cab if still available

**DPowers** · 12-07-2015, 01:22 PM

Quote:

Originally Posted by jamesrussell26

Ill take whole cab if still available

Works for me. PM me and we can work out the details.

**DPowers** · 12-10-2015, 12:03 AM

Quote:

Originally Posted by jamesrussell26

Ill take whole cab if still available

Brad54 is no longer interested. Mr Russell?

niterider65 · 12-10-2015, 10:49 PM

if your going to cut up the cab i need the right side cab corner if its not bondo all up
and if it could be over cut so i can drill out the spot welds on the rocker side and cut out just past the first circle in the back of the cab if its not taken
just let me know how much shipped to 76107
..

**DPowers** · 12-20-2015, 09:18 PM

Quote:

Originally Posted by niterider65

if your going to cut up the cab i need the right side cab corner if its not bondo all up
and if it could be over cut so i can drill out the spot welds on the rocker side and cut out just past the first circle in the back of the cab if its not taken
just let me know how much shipped to 76107
..

Is this the section that you need?

niterider65 · 12-20-2015, 10:19 PM

Quote:

Originally Posted by DPowers

Is this the section that you need?

That will work
Thanks

12-06-2015, 10:14 PM	#1
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Cab Pieces/Parts Bare cab would be $100.00. Going to take this cab to scrap in the near future. If there are any patch pieces that someone may be able to use, let me know. Patches will start at $10.00. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-06-2015, 10:37 PM	#3
Mikes66ChevyC10 Registered User Join Date: Feb 2014 Location: Forest City PA Posts: 378	Re: Cab Pieces/Parts If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!! __________________ 1966 C10 Stepside swb http://67-72chevytrucks.com/vboard/s...d.php?t=617778

12-06-2015, 10:45 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Cab Pieces/Parts [QUOTE=Mikes66ChevyC10;7401045]If your going to cut patches off the cab I could use the patch highlighted in red. I have some rust through where you see the black line. Can you check to see if this area is good on your cab? If it is I'd be interested in this patch. Thanks!! Best I can tell it is still good, but will have to take a closer look. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-06-2015, 10:38 PM	#10
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Cab Pieces/Parts Floors are not rusted through as best I can remember, but will have to get some pics. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-07-2015, 12:56 AM	#12
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Cab Pieces/Parts I need all this... Attached Images

12-07-2015, 12:57 AM	#13
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Cab Pieces/Parts with this part still attached... Attached Images

12-06-2015, 10:52 PM	#14
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Cab Pieces/Parts Probably be next weekend before I can get back to the truck. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-06-2015, 11:01 PM	#15
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Cab Pieces/Parts I need two of these cab mounting washers: __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-06-2015, 11:04 PM	#18
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Cab Pieces/Parts Lostmy65 You gotta give me a better clue... the whole area? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556 Last edited by DPowers; 12-06-2015 at 11:33 PM.

12-06-2015, 11:58 PM	#19
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: Cab Pieces/Parts Is the hump still available?

12-07-2015, 11:11 AM	#20
jamesrussell26 Registered User Join Date: Sep 2012 Location: jackson,tn Posts: 188	Re: Cab Pieces/Parts Ill take whole cab if still available

12-10-2015, 10:49 PM	#23
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	Re: Cab Pieces/Parts if your going to cut up the cab i need the right side cab corner if its not bondo all up and if it could be over cut so i can drill out the spot welds on the rocker side and cut out just past the first circle in the back of the cab if its not taken just let me know how much shipped to 76107 .. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.