TX custom led tail lights made to order

[Robznob11]

Custom led tail lamps. 125$+12 shipping add reverse lights +50$. Made to order . Plug and play.

[Robznob11]

This set is for sale too. It's the first set I made. These are somewhat plug and play . There needs to be a hole drilled into the reverse housing and the park break light will have to be spliced into your tail lamp wire. Pretty easy but it does require a splice. But that's the price for a custom look. These are also made with the superflux piranah leds. They are bright white and must be used with a red lense. They have not got the plugs on in the pic , but they will come with them .
You can see a YouTube video of them by searching homemade taillights sneek peak, also the bottom full tail will be wired to work as break / turn as well. Tho I did not say that in the video. These will be the same price as my others even though they are more custom and higher grade leds. Someone will get a good deal.
Pm me if interested.

[jondancer]

Do you need a flasher or relay or anything?

[Robznob11]

Yes you will need the led flashers, but other than that they work just like the bulbs.

[Robznob11]

Basically you tell me what you want and when they are done I'll email a PayPal request and ship them . These pictures are board members who bought them already.

[Robznob11]

Bump.
Also I like all things truck, hot rod , guitar. If you have a legitimate item we might can barter. I need a ls6 intake, injectors, fuel rails, tb...

[Robznob11]

Bump!!

[Elliot949]

Still Waiting... LOL

[Robznob11]

Dang, bro. I made a order of my normal red and added the super flux white for you. They only sent red. So I sent a message and they 're sent them. I messaged again last week and they had another excuse. I'm hoping they will be in this week. If not I'll go with another vendor. I like these because they are super bright and very efficient. They will light even with low power. I think the holiday has shipping running slow. I promise I'll get you the best set I can make tho.... Sorry.

[Elliot949]

Originally Posted by Robznob11

Dang, bro. I made a order of my normal red and added the super flux white for you. They only sent red. So I sent a message and they 're sent them. I messaged again last week and they had another excuse. I'm hoping they will be in this week. If not I'll go with another vendor. I like these because they are super bright and very efficient. They will light even with low power. I think the holiday has shipping running slow. I promise I'll get you the best set I can make tho.... Sorry.

I am just messin' with ya... I am not in a hurry... Truck is all blown apart anyway getting some final metal work done on it then I have to Block it and get it painted... that won't be for another couple of months... So don't worry about it... All is good...

[Robznob11]

Bump!!

[michael bustamante]

have you made any for a 55 chevy stepside yet?

[Robznob11]

I haven't but all I need is a pattern. And I can.

[74baggedbug]

Bump for a honest guy.. I love the 1's you did for my truck.. I'll be in touch for some reverse lights once I figure out why mine don't work lol

[BigRed76]

Do the led brake/tail lights attach to the housing or lense at all?

[Robznob11]

No they fit snug inside and there is a backer to prvent shorting against the housing

[BigRed76]

Originally Posted by Robznob11

No they fit snug inside and there is a backer to prvent shorting against the housing

Good to know. I will take a set of the brake/tail lights. PM me with payment info. Thanks

[Robznob11]

When I get them done I will pm you. Give me a day

[BigRed76]

Originally Posted by Robznob11

When I get them done I will pm you. Give me a day

Sounds good. I not in a huge hurry, and I know how things get around the holidays.

[BigRed76]

I received my lights on Thursday, they look great. Do you recommend any specific led flashers or should any of them work?

[jondancer]

I'd also like more info on the flasher install/wiring. Thanks

[Robznob11]

I would imagine any would work fine. But I have heard that the ones with the ground wire are the best. Maybe Andy will chime in with what he runns. He has had leds for years.

[Already Gone]

I bought a set of your LEDs, like the pictured ones in post 21 in this thread, from a friend who got em from u but never installed them and decided to go another way for lighting. I installed the reverse boards and taillights and wow they are bright The taillights, signal lights and barke lights all work super but when I put my 4 way flashers on the taillights do not flash but fronts with normal bulbs do. I'm thinking do I need a resistor in the taillight wiring to make em work or anything else u can think of or is there something in your design that is stopping them from working. I have a 72 C10.

[Robznob11]

Originally Posted by Already Gone

I bought a set of your LEDs, like the pictured ones in post 21 in this thread, from a friend who got em from u but never installed them and decided to go another way for lighting. I installed the reverse boards and taillights and wow they are bright The taillights, signal lights and barke lights all work super but when I put my 4 way flashers on the taillights do not flash but fronts with normal bulbs do. I'm thinking do I need a resistor in the taillight wiring to make em work or anything else u can think of or is there something in your design that is stopping them from working. I have a 72 C10.

Sir, typically when you have leds on all 4 corners you will leed led flashers. Led flashers are polarity sensitive. I don't really like the cheap plug in ones, not even those with the ground strap. I always recommend to my customers a Grote 44010 solid state flasher. You will probably need one for turns and one for Hazard. Pull the stock flasher and use a test light to see which side has 12v then hook the red wire to it. Hook the green to the side with no voltage and black to ground. Many times the Hazzard is opposite of the turn so check them both.

One thing you can check before that is the side marker lights on the front. Gm has a brown (park wire) going to one lead and the other side is hooked to the light bulb or dark blue turnsignal wire (depending on side) that works fine for normal bulbs but won't work for leds. Unhook the wire going to the blue or light blue and ground it to the body (sidemarker bulb side not the feed) this will keep the voltage from back feeding through the system. Your markers will be park only no blink.

[Already Gone]

Originally Posted by Robznob11

Sir, typically when you have leds on all 4 corners you will leed led flashers. Led flashers are polarity sensitive. I don't really like the cheap plug in ones, not even those with the ground strap. I always recommend to my customers a Grote 44010 solid state flasher. You will probably need one for turns and one for Hazard. Pull the stock flasher and use a test light to see which side has 12v then hook the red wire to it. Hook the green to the side with no voltage and black to ground. Many times the Hazzard is opposite of the turn so check them both.

One thing you can check before that is the side marker lights on the front. Gm has a brown (park wire) going to one lead and the other side is hooked to the light bulb or dark blue turnsignal wire (depending on side) that works fine for normal bulbs but won't work for leds. Unhook the wire going to the blue or light blue and ground it to the body (sidemarker bulb side not the feed) this will keep the voltage from back feeding through the system. Your markers will be park only no blink.

Thanks but maybe I didnt explain what I have properly. Your boards/lights work when braking, signaling or just being on and I do have LED Flashes on the truck. When I put my 4 way flashers on the front signal lights and side markers flash but the taillights do not. I have regular bulbs in my front flashers and side markers.