|
|
|
12-09-2015, 06:51 PM
|
#1 |
|
Registered User
Join Date: Jul 2015
Location: earth
Posts: 99
|
Brake problems
So, after installing my new CPP 2.5" drop spindles, my brake line runs directly into my upper ball joint stud. I solved this problem by notching the caliper where the brake line comes in and rotating the brake line fitting. The hose previously entered downwards into the caliper but now enters from the side. After all this, my brake pedal feels weaker at first, but returns to normal under harder braking. Any suggestions on how to fix this?
|
|
|
|
12-09-2015, 08:28 PM
|
#2 |
|
Registered User
Join Date: Apr 2009
Location: Pflugerville, TX
Posts: 594
|
Re: Brake problems
You probably got some air into the lines. You will need to bleed the brakes to get it out.
|
|
|
|
|
12-09-2015, 08:43 PM
|
#3 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Brake problems
My brakes are the same. I plan to rebleed them and see what that does
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart  My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
12-10-2015, 10:15 AM
|
#4 |
|
Registered User
Join Date: Jan 2013
Location: Toronto, ON
Posts: 458
|
Re: Brake problems
If you guys run into problems bleeding I highly recommend building a pressure bleeder.
I was reluctant thinking I could just pump it out...Not the case once I build a pressure bleeder it pushed a fair amount of trapped air out.
__________________
Found my dad's old truck http://67-72chevytrucks.com/vboard/s...d.php?t=563321 Newspaper Article Publishing the quest find my dad's old truck http://www.theglobeandmail.com/globe...ticle12494281/ |
|
|
|
|
12-10-2015, 11:10 AM
|
#5 | |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Brake problems
Quote:
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
|
12-10-2015, 02:25 PM
|
#6 |
|
Registered User
Join Date: Nov 2007
Location: Goose Creek SC
Posts: 161
|
Re: Brake problems
|
|
|
|
|
12-10-2015, 04:19 PM
|
#7 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Brake problems
Which one works the best? Did you have to fabricate a plate?
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
12-10-2015, 04:53 PM
|
#8 |
|
Registered User
Join Date: Nov 2007
Location: Goose Creek SC
Posts: 161
|
Re: Brake problems
No need to fab a plate. Mine was a 3 piece kit and I don't see it on the site anymore. This one has the plate that is included in my kit and works with most GM Master Cylinders. You can buy different adapters.
http://motiveproducts.3dcartstores.c...arge_p_48.html Application Guide link at bottom of page. http://www.motiveproducts.com/AppGuide.html |
|
|
|
|
12-10-2015, 07:42 PM
|
#9 |
|
Registered User
Join Date: Jan 2007
Location: Garland,TX
Posts: 431
|
Re: Brake problems
gravity bleeding works great and is free if you have some spare nylon tubing
__________________
80 C10 SWB Step Side - 350 w/ vortec heads, TH350, 12-bolt 3.73 |
|
|
|
|
12-10-2015, 08:34 PM
|
#10 |
|
Registered User
Join Date: Jul 2015
Location: earth
Posts: 99
|
Re: Brake problems
Brakes were bled thoroughly after install, with just gravity bleed. But I will try bleeding them again and see what happens
|
|
|
|
|
12-11-2015, 11:44 AM
|
#11 |
|
Registered User
Join Date: Jan 2013
Location: Toronto, ON
Posts: 458
|
Re: Brake problems
You can build you own plate. I built mine from a cutting board and used the old gasket from my old MC - the guys on this forum encouraged me to build one after having lots of problems with air in the lines. I rebuild my entire system so more air traps.
If you look at my posts you'll see the Brake Help post
__________________
Found my dad's old truck http://67-72chevytrucks.com/vboard/s...d.php?t=563321 Newspaper Article Publishing the quest find my dad's old truck http://www.theglobeandmail.com/globe...ticle12494281/ |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
