CA WTB Auto to manual conversion parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRoad · 12-28-2015, 02:35 AM

Sick and tired of the POS th350 in the K20. Hate the feeling it could go out at any time which it did today thankfully close to home not out in the boonies.

Need:

pedal assembly
frame brackets/rods
4x4 high hump

**1rippen6** · 12-28-2015, 10:21 AM

I have everything but the but the frame bracket and the rod that goes to the fork in the bell housing.

RedRoad · 12-28-2015, 01:09 PM

what are you asking shipped to 91342?

Thanks

**1rippen6** · 12-28-2015, 03:33 PM

Here is what I have everything is off a 4wd but the high hump it would need new holes. I did have the frame bracket what I don't have is the Z bar and the rod to the fork. 100 for everything in the picture and 65 shipping let me know if interested.

RedRoad · 12-28-2015, 08:06 PM

Quote:

Originally Posted by 1rippen6

Here is what I have everything is off a 4wd but the high hump it would need new holes. I did have the frame bracket what I don't have is the Z bar and the rod to the fork. 100 for everything in the picture and 65 shipping let me know if interested.

Sounds good, give me a few days to collect funds. Shoot me your PP info

blap · 12-28-2015, 06:40 PM

I have a floor shift non tilt column taken out of a truck that was a stick and I changed to a auto.Nice driver condition.
I would like to trade for a same condition automatic column.

sawman · 12-28-2015, 07:50 PM

I might have the rest you need to go with irippen6 stuff

RedRoad · 12-28-2015, 08:07 PM

Quote:

Originally Posted by sawman

I might have the rest you need to go with irippen6 stuff

Cool, let me know and shoot some pics and prices

RedRoad · 12-28-2015, 08:07 PM

Quote:

Originally Posted by blap

I have a floor shift non tilt column taken out of a truck that was a stick and I changed to a auto.Nice driver condition.
I would like to trade for a same condition automatic column.

Would you consider selling outright?

RedRoad · 12-31-2015, 06:33 PM

Anyone else have any parts?

**Ironhorse** · 12-31-2015, 11:01 PM

Have a GM cast clutch fork, couple clutch rods, engine side bolt on ball stud, maybe a few others. Let me know if interested and can get some pics.

All left from when I went the other way, manual to auto. 66 years young and bad knees sucks. Still miss my 4 spd. stick in my 4x4 except in traffic

**70STOVEBOLT** · 01-01-2016, 05:10 PM

I have the frame bracket for the z-bar and fork, rod, and boot.

blap · 01-10-2016, 01:00 PM

Pics of the column I have

RedRoad · 01-10-2016, 02:00 PM

Thanks for the replies, I think I have what I need to get started.

Blap how much on shipping for the column? Thanks

blap · 01-10-2016, 02:09 PM

pm sent

12-28-2015, 02:35 AM	#1
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	WTB Auto to manual conversion parts Sick and tired of the POS th350 in the K20. Hate the feeling it could go out at any time which it did today thankfully close to home not out in the boonies. Need: pedal assembly frame brackets/rods 4x4 high hump

12-28-2015, 10:21 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Auto to manual conversion parts I have everything but the but the frame bracket and the rod that goes to the fork in the bell housing.

12-28-2015, 01:09 PM	#3
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: WTB Auto to manual conversion parts what are you asking shipped to 91342? Thanks

12-28-2015, 03:33 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB Auto to manual conversion parts Here is what I have everything is off a 4wd but the high hump it would need new holes. I did have the frame bracket what I don't have is the Z bar and the rod to the fork. 100 for everything in the picture and 65 shipping let me know if interested. Attached Images

12-28-2015, 06:40 PM	#6
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: WTB Auto to manual conversion parts I have a floor shift non tilt column taken out of a truck that was a stick and I changed to a auto.Nice driver condition. I would like to trade for a same condition automatic column.

12-28-2015, 07:50 PM	#7
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: WTB Auto to manual conversion parts I might have the rest you need to go with irippen6 stuff

12-31-2015, 06:33 PM	#10
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: WTB Auto to manual conversion parts Anyone else have any parts?

12-31-2015, 11:01 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB Auto to manual conversion parts Have a GM cast clutch fork, couple clutch rods, engine side bolt on ball stud, maybe a few others. Let me know if interested and can get some pics. All left from when I went the other way, manual to auto. 66 years young and bad knees sucks. Still miss my 4 spd. stick in my 4x4 except in traffic __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-01-2016, 05:10 PM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB Auto to manual conversion parts I have the frame bracket for the z-bar and fork, rod, and boot. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-10-2016, 01:00 PM	#13
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: WTB Auto to manual conversion parts Pics of the column I have Attached Images

01-10-2016, 02:00 PM	#14
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: WTB Auto to manual conversion parts Thanks for the replies, I think I have what I need to get started. Blap how much on shipping for the column? Thanks

01-10-2016, 02:09 PM	#15
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: WTB Auto to manual conversion parts pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.