question about parts from a 61 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rustyo61 · 01-02-2016, 04:44 PM

I have taken my truck apart and was wondering if any of the parts are worth selling or should I just scrap them? 235 engine and three speed all complete. And the complete front suspension changing to 87. If any of it is worth selling is it better to sell here or ebay? Thanks for any info

Brad54 · 01-02-2016, 04:49 PM

Throw it in the Classifieds here, and on Craigslist. It can't hurt.

I'll take the clutch forks adjuster pushrod if you're getting rid of 'em.

-Brad

Rustyo61 · 01-02-2016, 05:52 PM

I will keep in mind what you need but would it be better parted out or sell whole?

Brad54 · 01-02-2016, 08:09 PM

Not too many people looking for a complete '60-'62 cross member.
Someone might need the spindles or hubs if they're replacing one that was damaged or lost during a restoration.

Well.... same with most of the parts from the front cross member and T-bar assembly.

As for the engine, I dunno what a straight 6 is worth... seems like not much. If someone needs things, in my opinion, it's parts they're going to need, not the whole engine/trans combo.

-Brad

63 & 64 Bowties · 01-02-2016, 10:11 PM

Once you become a subscribing member of the forum you'll be able to list all the parts in the For Sale section of the forum.

01-02-2016, 04:44 PM	#1
Rustyo61 Registered User Join Date: Sep 2015 Location: Bowling Green, ky Posts: 55	question about parts from a 61 I have taken my truck apart and was wondering if any of the parts are worth selling or should I just scrap them? 235 engine and three speed all complete. And the complete front suspension changing to 87. If any of it is worth selling is it better to sell here or ebay? Thanks for any info

01-02-2016, 04:49 PM	#2
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: question about parts from a 61 Throw it in the Classifieds here, and on Craigslist. It can't hurt. I'll take the clutch forks adjuster pushrod if you're getting rid of 'em. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

01-02-2016, 05:52 PM	#3
Rustyo61 Registered User Join Date: Sep 2015 Location: Bowling Green, ky Posts: 55	Re: question about parts from a 61 I will keep in mind what you need but would it be better parted out or sell whole?

01-02-2016, 08:09 PM	#4
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: question about parts from a 61 Not too many people looking for a complete '60-'62 cross member. Someone might need the spindles or hubs if they're replacing one that was damaged or lost during a restoration. Well.... same with most of the parts from the front cross member and T-bar assembly. As for the engine, I dunno what a straight 6 is worth... seems like not much. If someone needs things, in my opinion, it's parts they're going to need, not the whole engine/trans combo. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

01-02-2016, 10:11 PM	#5
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: question about parts from a 61 Once you become a subscribing member of the forum you'll be able to list all the parts in the For Sale section of the forum. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.