Looking for a bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AASmedic · 01-05-2016, 08:09 PM

Does anyone know where I can find a 4x4 bracket like the one pictured here? Its for a 72 K20. I have searched the threads but have not had any luck so far. Name: Bracket.jpg
Views: 337
Size: 57.2 KB

Name: Bracket.jpg
Views: 337
Size: 57.2 KB

Name: bracket2.jpg
Views: 341
Size: 56.4 KB

57taskforce · 01-05-2016, 10:34 PM

Welcome to the board from Farmington! I don't have any help on the bracket but I can say that my 72 K/20 has a tie rod from a square body truck that has the hole for the stabilizer built in.ive not seen these brackets reproduced any where, your best bet is the parts board or get creative and make something work.

tcrist · 01-05-2016, 11:47 PM

That could be a bracket from an aftermarket stabilizer kit.

I would search the 4x4 parts places for aftermarket steering stabilizer kits.

AASmedic · 01-06-2016, 12:29 AM

Thanks for the input. From everything I have read, this is possibly a late addition to the 72 trucks. I will keep looking. Thanks again

swamp rat · 01-06-2016, 01:18 AM

You need to buy a stabilizer kit or call or email the mfgrs and see if they will sell a bracket, but it most likely won't be like the one your looking for so will be a crap shoot.

cdowns · 01-06-2016, 02:34 PM

that bracket doesn't look like it would b that hard to fabricate if you had the tools to do it

kehstr · 01-07-2016, 01:45 PM

Quote:

Originally Posted by cdowns

that bracket doesn't look like it would b that hard to fabricate if you had the tools to do it

Isn't anything easy with the tools and skills

cdowns · 01-07-2016, 04:37 PM

Quote:

Originally Posted by kehstr

Isn't anything easy with the tools and skills

yep all i'd need would be my jigsaw a drill a torch and a vise big time tools to do the job// plus a healthy dose of imagination

AASmedic · 01-13-2016, 09:16 PM

Thanks to Blazerman for the bracket. It arrived today.

01-05-2016, 08:09 PM	#1
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Looking for a bracket Does anyone know where I can find a 4x4 bracket like the one pictured here? Its for a 72 K20. I have searched the threads but have not had any luck so far.

01-05-2016, 10:34 PM	#2
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,504	Re: Looking for a bracket Welcome to the board from Farmington! I don't have any help on the bracket but I can say that my 72 K/20 has a tie rod from a square body truck that has the hole for the stabilizer built in.ive not seen these brackets reproduced any where, your best bet is the parts board or get creative and make something work. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

01-05-2016, 11:47 PM	#3
tcrist Registered User Join Date: May 2014 Location: Manteca, Ca. Posts: 274	Re: Looking for a bracket That could be a bracket from an aftermarket stabilizer kit. I would search the 4x4 parts places for aftermarket steering stabilizer kits. __________________ Terry Soon to be retired and moving to Bristol, TN.

01-06-2016, 12:29 AM	#4
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Looking for a bracket Thanks for the input. From everything I have read, this is possibly a late addition to the 72 trucks. I will keep looking. Thanks again

01-06-2016, 01:18 AM	#5
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Looking for a bracket You need to buy a stabilizer kit or call or email the mfgrs and see if they will sell a bracket, but it most likely won't be like the one your looking for so will be a crap shoot. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-06-2016, 02:34 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Looking for a bracket that bracket doesn't look like it would b that hard to fabricate if you had the tools to do it __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-13-2016, 09:16 PM	#9
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Looking for a bracket Thanks to Blazerman for the bracket. It arrived today.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.