4"drop from a 3"spring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mgb · 01-09-2016, 08:46 AM

How much do I cut off of a 3" drop spring to get 4" drop?

**Grumpy old man** · 01-09-2016, 08:55 AM

That's going to be a hard question to get answers on .It's like asking what color is white ? Different manufactures ,Varying spring tension and no one wants to give you an unintentional misleading measurement at best it's going to be a guesstimate .

**Boog** · 01-09-2016, 09:04 AM

If removing 1 coil on a stock spring nets about 2" then a 1/2 coil should net about 1" approximately.
However, the general line of thinking is that going with any more than a 3" spring drop only on front leads to alignment issues.
The better approach is 2 1/2" or 3" dropped spindles + 1, 2" springs.

mgb · 01-09-2016, 09:25 AM

When you say "drop only on front", if I'm dropping the back 5", will that help me on alignment

EARNHARDT#3 · 01-09-2016, 09:53 AM

Quote:

Originally Posted by mgb

When you say "drop only on front", if I'm dropping the back 5", will that help me on alignment

He means drop spring. You're better off doing a spindle drop or a spindle/spring combo to get your desired amount of drop.

C/10 King · 01-09-2016, 12:02 PM

........and get ready for most likely a lousy ride....

01-09-2016, 08:46 AM	#1
mgb Registered User Join Date: Sep 2015 Location: Ellenboro, NC Posts: 43	4"drop from a 3"spring How much do I cut off of a 3" drop spring to get 4" drop?

01-09-2016, 08:55 AM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 4"drop from a 3"spring That's going to be a hard question to get answers on .It's like asking what color is white ? Different manufactures ,Varying spring tension and no one wants to give you an unintentional misleading measurement at best it's going to be a guesstimate .

01-09-2016, 09:25 AM	#4
mgb Registered User Join Date: Sep 2015 Location: Ellenboro, NC Posts: 43	Re: 4"drop from a 3"spring When you say "drop only on front", if I'm dropping the back 5", will that help me on alignment

01-09-2016, 12:02 PM	#6
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: 4"drop from a 3"spring ........and get ready for most likely a lousy ride.... __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

01-09-2016, 09:04 AM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,535	Re: 4"drop from a 3"spring If removing 1 coil on a stock spring nets about 2" then a 1/2 coil should net about 1" approximately. However, the general line of thinking is that going with any more than a 3" spring drop only on front leads to alignment issues. The better approach is 2 1/2" or 3" dropped spindles + 1, 2" springs. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.