Wow, found another K20 on craigslist - The 1947 - Present Chevrolet & GMC Truck Message Board Network

El Dorado Jim · 01-19-2016, 03:16 AM

http://sacramento.craigslist.org/cto/5405618941.html this is a 68 gmc K20

SoCalK20 · 01-21-2016, 01:00 AM

Seems like a fair starting price, no?

andrewmp6 · 01-21-2016, 02:30 AM

Around me that would go for 5k to 8k.

**special-K** · 01-21-2016, 08:52 AM

If that was factory it would be a K2500 since it's a GMC. But, it appears to be C1500 or 2500 on a '73-up chassis. I would buy it for that price. So, when someone says the lower end bearings were replaced, what do they mean? Sounds to me like pull the pan and replace crank and rod bearings, but same old wrist pin bushings, rings, and anything else above

**jeffahart** · 01-21-2016, 02:08 PM

probably spun a bearing and did quick fix.

Krex · 01-21-2016, 11:23 PM

I wouldn't buy it only since is not on correct frame. But great price for someone that doesn't care about that. I would make sure to get a good test drive for the engine. Since it had work than sat a while

**First c10** · 01-22-2016, 10:54 AM

Probably best as a parts truck to someone that wants 3/4 ton running gear

01-19-2016, 03:16 AM	#1
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Wow, found another K20 on craigslist http://sacramento.craigslist.org/cto/5405618941.html this is a 68 gmc K20

01-21-2016, 01:00 AM	#2
SoCalK20 Registered User Join Date: Jan 2012 Location: San Diego, CA Posts: 25	Re: Wow, found another K20 on craigslist Seems like a fair starting price, no?

01-21-2016, 02:30 AM	#3
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Wow, found another K20 on craigslist Around me that would go for 5k to 8k.

01-21-2016, 08:52 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Wow, found another K20 on craigslist If that was factory it would be a K2500 since it's a GMC. But, it appears to be C1500 or 2500 on a '73-up chassis. I would buy it for that price. So, when someone says the lower end bearings were replaced, what do they mean? Sounds to me like pull the pan and replace crank and rod bearings, but same old wrist pin bushings, rings, and anything else above __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2016, 02:08 PM	#5
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,907	Re: Wow, found another K20 on craigslist probably spun a bearing and did quick fix. __________________ White K20

01-21-2016, 11:23 PM	#6
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Wow, found another K20 on craigslist I wouldn't buy it only since is not on correct frame. But great price for someone that doesn't care about that. I would make sure to get a good test drive for the engine. Since it had work than sat a while

01-22-2016, 10:54 AM	#7
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Wow, found another K20 on craigslist Probably best as a parts truck to someone that wants 3/4 ton running gear __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.