3/8" schrader vavle source?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**youngrodder** · 01-19-2016, 10:53 PM

Anyone know a source for 3/8" push lock Schrader valves? I want to a way to manually fill my bags while I build my chassis. I stopped by my local parker hanafin store and have been scouring the net to no avail.

Thank you
Marc

suville · 01-19-2016, 11:12 PM

Try truckspring.com

**youngrodder** · 01-20-2016, 12:01 AM

Quote:

Originally Posted by suville

Try truckspring.com

They have them for 1/4 line but I don't see any for 3/8

Thanks
Marc

Pro Performance · 01-20-2016, 12:31 AM

I have never seen any for 3/8 line either.

**youngrodder** · 01-20-2016, 09:06 AM

Quote:

Originally Posted by Pro Performance

I have never seen any for 3/8 line either.

OK good, I'm not crazy then. I assume people make them up with different fittings. I will report my findings for others.

Thanks
Marc

**Hart_Rod** · 01-20-2016, 09:36 AM

Quote:

Originally Posted by youngrodder

Anyone know a source for 3/8" push lock Schrader valves? I want to a way to manually fill my bags while I build my chassis. I stopped by my local parker hanafin store and have been scouring the net to no avail.

Thank you
Marc

Try Fastenal.

**youngrodder** · 01-20-2016, 02:20 PM

Quote:

Originally Posted by Hart_Rod

Try Fastenal.

Thanks will do....

Marc

**dec010974** · 01-20-2016, 08:18 PM

Hello to all. This can't be to hard. Why don't you use adapters. The schrader valve will be 1/4 inch male or female. Use a male or female adapter for the push to connect fitting that goes to the 3/8 air line.

**youngrodder** · 01-20-2016, 10:35 PM

Quote:

Originally Posted by dec010974

Hello to all. This can't be to hard. Why don't you use adapters. The schrader valve will be 1/4 inch male or female. Use a male or female adapter for the push to connect fitting that goes to the 3/8 air line.

Yes that's about the only way you can do it. I did find a 3/8 Schrader but it was from a company in China. I don't want one that bad..ha ha

Marc

**dec010974** · 01-20-2016, 11:32 PM

Thursday morning, I'll check in the garage to see what I used. It definitely was a push to connect 3/8 tee with a male end that screwed into a female end that adapted to a 1/4 schrader valve. I will post pics asap.

Woodnears · 01-21-2016, 12:27 AM

Go to your local hardware store. I used a couple schraders with a series of adapters to get to the appropriate size. As far as setting it up to raise either the front or back together just use ptc to a ptc tee to a compression with a schrader. Doesn't have to be fancy if you plan on replacing anyways right?

midnight rambler · 01-21-2016, 01:03 AM

Swagelok might have them

**youngrodder** · 01-21-2016, 09:01 AM

Quote:

Originally Posted by dec010974

Thursday morning, I'll check in the garage to see what I used. It definitely was a push to connect 3/8 tee with a male end that screwed into a female end that adapted to a 1/4 schrader valve. I will post pics asap.

Thanks

Quote:

Originally Posted by Woodnears

Go to your local hardware store. I used a couple schraders with a series of adapters to get to the appropriate size. As far as setting it up to raise either the front or back together just use ptc to a ptc tee to a compression with a schrader. Doesn't have to be fancy if you plan on replacing anyways right?

I have the T figures out and stuff like that, I just thought I could buy a 3/8" schrader valve without turning it into plumbing exercise.

Quote:

Originally Posted by midnight rambler

Swagelok might have them

I plan on using these. They are the cheapest that I found.
http://www.ebay.com/itm/310324104805...%3AMEBIDX%3AIT
and
http://www.ebay.com/itm/111603154912...%3AMEBIDX%3AIT

Marc

**Hart_Rod** · 01-21-2016, 09:53 AM

Quote:

Originally Posted by youngrodder

Thanks

I have the T figures out and stuff like that, I just thought I could buy a 3/8" schrader valve without turning it into plumbing exercise.

I plan on using these. They are the cheapest that I found.
http://www.ebay.com/itm/310324104805...%3AMEBIDX%3AIT
and
http://www.ebay.com/itm/111603154912...%3AMEBIDX%3AIT

Marc

Don't buy anything yet. Let take a look at what I used on mine. If it will work for you, I can recoup a little of my money and save you some. Text me this evening at 850-291-0499. Rob

**youngrodder** · 01-21-2016, 05:38 PM

Quote:

Originally Posted by Hart_Rod

Don't buy anything yet. Let take a look at what I used on mine. If it will work for you, I can recoup a little of my money and save you some. Text me this evening at 850-291-0499. Rob

Rob

Sorry too late. I was tired of looking so I pulled the trigger (prior to seeing your message). All in it was less than $20.00 (shipped). No bad. I already blew $70 on some Parker Hannifin fittings so whats another $20.00 ha ha

I appreciate your gesture.

Marc

**Hart_Rod** · 01-21-2016, 05:40 PM

No worries!

**dec010974** · 01-21-2016, 06:54 PM

sorry for my late reply. here is a pic of what I used. the first pic is a Schrader valve for 1/4 air line. can you see my finger? the second pic shows how the adapter and the PTC fittings go together. The 3rd pic is how I used the 3/8 ptc fittings, adapter, and the Schrader valve. good luck and sorry for the late post.

**Advanced Design** · 01-22-2016, 07:02 PM

Marc, when you get yours put together can you throw up a picture or two please? I may do the same.

**youngrodder** · 01-25-2016, 11:40 PM

Quote:

Originally Posted by Advanced Design

Marc, when you get yours put together can you throw up a picture or two please? I may do the same.

Yes Doug will do. I'm waiting for a few fittings and parts to show up.

Marc

Coach529 · 01-26-2016, 10:44 PM

https://bagriders.com/modlab/product...GAUGE-TEE.html

3/8" PTC to 1/8" NPT

**youngrodder** · 01-27-2016, 10:38 PM

Quote:

Originally Posted by Advanced Design

Marc, when you get yours put together can you throw up a picture or two please? I may do the same.

Here are a couple pics of the below e-bay listing. I'm waiting on my t-fittings. I think if you used the T-fittings listed by Coach and the Schrader I listed it would be your cheapest route to go.

http://www.ebay.com/itm/310324104805...%3AMEBIDX%3AIT
and
http://www.ebay.com/itm/111603154912...%3AMEBIDX%3AIT

Quote:

Originally Posted by Coach529

https://bagriders.com/modlab/product...GAUGE-TEE.html

3/8" PTC to 1/8" NPT

Now you share this info...JK. its all good. I have mine figured out.

Marc

Coach529 · 01-27-2016, 11:55 PM

Quote:

Originally Posted by youngrodder

Here are a couple pics of the below e-bay listing. I'm waiting on my t-fittings. I think if you used the T-fittings listed by Coach and the Schrader I listed it would be your cheapest route to go.

http://www.ebay.com/itm/310324104805...%3AMEBIDX%3AIT
and
http://www.ebay.com/itm/111603154912...%3AMEBIDX%3AIT

Now you share this info...JK. its all good. I have mine figured out.

Marc

Sorry I was not quicker on the ball Marc. :-)

I had just ordered a set of these for my set up.........

**Advanced Design** · 01-27-2016, 10:46 PM

Thanks Marc and Coach!
Ordered the schrader valves...hmm punched in 4...oh well.
And ordered 2 of Coaches T recommendation.

01-19-2016, 10:53 PM	#1
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	3/8" schrader vavle source?? Anyone know a source for 3/8" push lock Schrader valves? I want to a way to manually fill my bags while I build my chassis. I stopped by my local parker hanafin store and have been scouring the net to no avail. Thank you Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

01-19-2016, 11:12 PM	#2
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: 3/8" schrader vavle source?? *Try truckspring.com*

01-20-2016, 12:31 AM	#4
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 3/8" schrader vavle source?? I have never seen any for 3/8 line either.

01-20-2016, 08:18 PM	#8
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: 3/8" schrader vavle source?? Hello to all. This can't be to hard. Why don't you use adapters. The schrader valve will be 1/4 inch male or female. Use a male or female adapter for the push to connect fitting that goes to the 3/8 air line.

01-20-2016, 11:32 PM	#10
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: 3/8" schrader vavle source?? Thursday morning, I'll check in the garage to see what I used. It definitely was a push to connect 3/8 tee with a male end that screwed into a female end that adapted to a 1/4 schrader valve. I will post pics asap.

01-21-2016, 12:27 AM	#11
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: 3/8" schrader vavle source?? Go to your local hardware store. I used a couple schraders with a series of adapters to get to the appropriate size. As far as setting it up to raise either the front or back together just use ptc to a ptc tee to a compression with a schrader. Doesn't have to be fancy if you plan on replacing anyways right?

01-21-2016, 01:03 AM	#12
midnight rambler Registered User Join Date: Apr 2012 Location: san diego ca Posts: 618	Re: 3/8" schrader vavle source?? Swagelok might have them

01-21-2016, 05:40 PM	#16
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 3/8" schrader vavle source?? No worries! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-21-2016, 06:54 PM	#17
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: 3/8" schrader vavle source?? sorry for my late reply. here is a pic of what I used. the first pic is a Schrader valve for 1/4 air line. can you see my finger? the second pic shows how the adapter and the PTC fittings go together. The 3rd pic is how I used the 3/8 ptc fittings, adapter, and the Schrader valve. good luck and sorry for the late post. Attached Images

01-22-2016, 07:02 PM	#18
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 3/8" schrader vavle source?? Marc, when you get yours put together can you throw up a picture or two please? I may do the same. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-26-2016, 10:44 PM	#20
Coach529 Registered User Join Date: Nov 2012 Location: Post Falls, Idaho Posts: 1,757	Re: 3/8" schrader vavle source?? https://bagriders.com/modlab/product...GAUGE-TEE.html 3/8" PTC to 1/8" NPT __________________ 1949 Chevy 3600 "Adventures of Henry" http://smu.gs/QOlhWY

01-27-2016, 10:46 PM	#23
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 3/8" schrader vavle source?? Thanks Marc and Coach! Ordered the schrader valves...hmm punched in 4...oh well. And ordered 2 of Coaches T recommendation. Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap Last edited by Advanced Design; 01-27-2016 at 11:02 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.