KY WTB: Bell Housing SM465 '68 to'72 Cast Iron - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 01-20-2016, 11:05 AM

Want to buy cast iron bell housing for SM465 from 1968 to 1972 Chevy truck.
I think the casting number is 3925505. Looking for one in good condition with out damage.

Thanks,
Les

**DaHos** · 01-20-2016, 12:06 PM

Have one here. Still attached to 465 trans. $50 plus shipping $$??

Need to pull trans and verify casting #.

**aotte1** · 01-20-2016, 04:11 PM

DaHos,

PM sent.

Do you have the clutch fork for it too?

Thanks,
Les

BigBlockBurris · 01-20-2016, 04:35 PM

I pulled the 3 speed out of my truck and have all the leftovers, including a good bell housing. You will have to check what will interchange between the factory 3 speed and 4 speed.

Will sell it all CHEAP!!!

BBB

**70STOVEBOLT** · 01-20-2016, 06:02 PM

I have one also. Get me a zip and I will get you a shipped price. I am about 4.5 hrs North of Louisville, but may be able to meet in Indianapolis, I have relatives there. If you get up that way could save on shipping. Let me know.

Thanks,
Mark

**aotte1** · 01-21-2016, 03:45 PM

BBB!

The 3 speed bell housing looks different, however, still checking on clutch fork and other parts. Interested in clutch fork if same. Will get back to you on that.

Thanks,
Les

**aotte1** · 01-21-2016, 03:47 PM

Mark,

Interested in your bell housing too, as I will need two of them. Do still have your clutch fork and throw out bearing, and any clutch linkage/ pivots not worn too much.

Thanks,
Les

**70STOVEBOLT** · 01-21-2016, 04:05 PM

Quote:

Originally Posted by aotte1

Mark,

Interested in your bell housing too, as I will need two of them. Do still have your clutch fork and throw out bearing, and any clutch linkage/ pivots not worn too much.

Thanks,
Les

Les,

I will check to see what I have left. I sold the z-bar, but may still have the fork.

Thanks,
Mark

**michael bustamante** · 01-21-2016, 03:49 PM

is a 1966 bellhousing different?

**aotte1** · 01-21-2016, 04:07 PM

Michael,

I think they are different, from what I have read. Not sure of all the differences, however, one is the input pilot bearing retainer on a SM465 transmission is a larger diameter, therefor, the opening on bell housing is larger, then earlier ones, it is 5.125" diameter.
From previous post by CaptainFab, '68 to '72 trucks..... have the cast iron bell housing for the SM465 transmission. After '72, the bell housing were made of aluminum.

Les

**aotte1** · 01-21-2016, 04:14 PM

Mark,

Thanks, for looking.

Les

teds72 · 01-21-2016, 05:28 PM

Would be interested in bottom cover for bell housing

**70STOVEBOLT** · 01-21-2016, 06:03 PM

Les,

I have the fork, adjustment rod, and boot as well as the bell housing. I can go $65 shipped for everything. I will get you some pics as soon as I get the housing cleaned.

Thanks,
Mark

**aotte1** · 01-21-2016, 06:11 PM

Mark,

Sounds good, will confirm after seeing photos.

Les

**70STOVEBOLT** · 01-22-2016, 03:30 PM

Here are pics of the bell housing and clutch linkage parts that I have left. The boot is probably not worth using. Let me know.

Thanks,
Mark

**aotte1** · 01-22-2016, 03:50 PM

Mark,

Looks real good, I will take it and other clutch parts.

How do you want payment? For shipping to 42701 zip code?

Thanks,
Les

**70STOVEBOLT** · 01-22-2016, 03:51 PM

Paypal or postal money order is fine. PM coming with info..

Thanks,
Mark

**aotte1** · 01-22-2016, 06:32 PM

Mark,

PM sent.

thanks.
Les

**aotte1** · 01-23-2016, 01:00 PM

Mark,

Another PM sent.

Les

**DaHos** · 01-24-2016, 02:33 PM

Pics:

01-20-2016, 11:05 AM	#1
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	WTB: Bell Housing SM465 '68 to'72 Cast Iron Want to buy cast iron bell housing for SM465 from 1968 to 1972 Chevy truck. I think the casting number is 3925505. Looking for one in good condition with out damage. Thanks, Les

01-20-2016, 12:06 PM	#2
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Have one here. Still attached to 465 trans. $50 plus shipping $$?? Need to pull trans and verify casting #. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

01-20-2016, 04:11 PM	#3
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron DaHos, PM sent. Do you have the clutch fork for it too? Thanks, Les

01-20-2016, 04:35 PM	#4
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron I pulled the 3 speed out of my truck and have all the leftovers, including a good bell housing. You will have to check what will interchange between the factory 3 speed and 4 speed. Will sell it all CHEAP!!! BBB Attached Images

01-20-2016, 06:02 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron I have one also. Get me a zip and I will get you a shipped price. I am about 4.5 hrs North of Louisville, but may be able to meet in Indianapolis, I have relatives there. If you get up that way could save on shipping. Let me know. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-21-2016, 03:45 PM	#6
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron BBB! The 3 speed bell housing looks different, however, still checking on clutch fork and other parts. Interested in clutch fork if same. Will get back to you on that. Thanks, Les

01-21-2016, 03:47 PM	#7
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, Interested in your bell housing too, as I will need two of them. Do still have your clutch fork and throw out bearing, and any clutch linkage/ pivots not worn too much. Thanks, Les Last edited by aotte1; 01-21-2016 at 03:53 PM.

01-21-2016, 03:49 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron is a 1966 bellhousing different? __________________ 1967custom

01-21-2016, 04:07 PM	#10
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Michael, I think they are different, from what I have read. Not sure of all the differences, however, one is the input pilot bearing retainer on a SM465 transmission is a larger diameter, therefor, the opening on bell housing is larger, then earlier ones, it is 5.125" diameter. From previous post by CaptainFab, '68 to '72 trucks..... have the cast iron bell housing for the SM465 transmission. After '72, the bell housing were made of aluminum. Les

01-21-2016, 04:14 PM	#11
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, Thanks, for looking. Les

01-21-2016, 05:28 PM	#12
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Would be interested in bottom cover for bell housing

01-21-2016, 06:03 PM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Les, I have the fork, adjustment rod, and boot as well as the bell housing. I can go $65 shipped for everything. I will get you some pics as soon as I get the housing cleaned. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-21-2016, 06:11 PM	#14
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, Sounds good, will confirm after seeing photos. Les

01-22-2016, 03:30 PM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Here are pics of the bell housing and clutch linkage parts that I have left. The boot is probably not worth using. Let me know. Thanks, Mark Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-22-2016, 03:50 PM	#16
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, Looks real good, I will take it and other clutch parts. How do you want payment? For shipping to 42701 zip code? Thanks, Les



Register or Log In To remove these advertisements.

01-22-2016, 03:51 PM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Paypal or postal money order is fine. PM coming with info.. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-22-2016, 06:32 PM	#18
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, PM sent. thanks. Les

01-23-2016, 01:00 PM	#19
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Mark, Another PM sent. Les

01-24-2016, 02:33 PM	#20
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: WTB: Bell Housing SM465 '68 to'72 Cast Iron Pics: Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

Register or Log In To remove these advertisements.