Looking for some 67 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c-tenkid · 09-21-2003, 07:01 PM

I am looking for a few parts for my 67

First of all I would like to find a passenger side fender.It needs to be straight with no rust or bondo.

Second of all I would like to find a set of motor mounts and the frame towers.For a SBC.

Third I would like to find 4 slotted aluminum mag wheels.They have to be 15 inch and be 6 lug.

Also a wiring diagram.I would think the starter wires on my 69 and my 67 would be the same color.However there not.And I can't seem to find them.I know one of them comes straight from the postive post on the battery and then two of them come from the wiring harness.If I remember correctly on my 69 one is black and the green.

If anyone has any of these.I can pay with a money order sent to them.It ussually takes about a week to get it.

Thanks alot.

Hotrodhenryj · 09-21-2003, 07:11 PM

I have the fender and the mounts and stands. 100 for the fender and 40 for the mounts and stands. Seems to me that the selonid wire is purple if yours is an 8cyl.

c-tenkid · 09-21-2003, 07:58 PM

I'll take the mounts and stands.

Shoot me a PM with your address.I am thinking I might go with a new fender.Do you got a pic of your you could put up?If it is mint I will probably take it.

Hotrodhenryj · 09-21-2003, 09:09 PM

Mounts

Hotrodhenryj · 09-21-2003, 09:11 PM

Here is a pic of fender. It is very nice no rust minor dings. If you dont want it that OK as I will save it for my short bed project. You can expect around 45 shipping as it is oversized.

Longhorn Man · 09-21-2003, 11:42 PM

The wire for your starter should be purple coming from the harness. This one will go on the 'S' terminal. If you still have the points ignition system, (Which you may want to look into ditching) then there will be a yellow wire from the 'R' terminal, going up to the coil.

Hotrodhenryj · 09-22-2003, 01:34 PM

PM sent

c-tenkid · 09-22-2003, 11:40 PM

Longhornmail

Alright so I only need two wires?I got this 67 without and engine.So I only need the wire from the battery and the purple wire from the harness correct?

Thanks alot.

Today I took everything off the radiator support and cleaned everything and stripped it down.Tommorow I am going to sandblast the back side of the radiator support and paint it.I am also going to order a new bushings and hardware from early classic enterprise.The firewall also got stripped and primered.

The front clip should be back on in a few weeks.And then a motor and trans are next.Woohoo.

I am also ordering a eagle rotating assembly to build a 383 for my 69.

Looks like things might be coming along.

09-21-2003, 07:01 PM	#1
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	Looking for some 67 parts I am looking for a few parts for my 67 First of all I would like to find a passenger side fender.It needs to be straight with no rust or bondo. Second of all I would like to find a set of motor mounts and the frame towers.For a SBC. Third I would like to find 4 slotted aluminum mag wheels.They have to be 15 inch and be 6 lug. Also a wiring diagram.I would think the starter wires on my 69 and my 67 would be the same color.However there not.And I can't seem to find them.I know one of them comes straight from the postive post on the battery and then two of them come from the wiring harness.If I remember correctly on my 69 one is black and the green. If anyone has any of these.I can pay with a money order sent to them.It ussually takes about a week to get it. Thanks alot. __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's

09-21-2003, 07:11 PM	#2
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	I have the fender and the mounts and stands. 100 for the fender and 40 for the mounts and stands. Seems to me that the selonid wire is purple if yours is an 8cyl. __________________ Arizona rust free sheetmetal

09-21-2003, 07:58 PM	#3
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	I'll take the mounts and stands. Shoot me a PM with your address.I am thinking I might go with a new fender.Do you got a pic of your you could put up?If it is mint I will probably take it. __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's

09-21-2003, 09:09 PM	#4
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Mounts Attached Images __________________ Arizona rust free sheetmetal

09-21-2003, 09:11 PM	#5
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Here is a pic of fender. It is very nice no rust minor dings. If you dont want it that OK as I will save it for my short bed project. You can expect around 45 shipping as it is oversized. Attached Images __________________ Arizona rust free sheetmetal

09-21-2003, 11:42 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The wire for your starter should be purple coming from the harness. This one will go on the 'S' terminal. If you still have the points ignition system, (Which you may want to look into ditching) then there will be a yellow wire from the 'R' terminal, going up to the coil.

09-22-2003, 01:34 PM	#7
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	PM sent __________________ Arizona rust free sheetmetal

09-22-2003, 11:40 PM	#8
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	Longhornmail Alright so I only need two wires?I got this 67 without and engine.So I only need the wire from the battery and the purple wire from the harness correct? Thanks alot. Today I took everything off the radiator support and cleaned everything and stripped it down.Tommorow I am going to sandblast the back side of the radiator support and paint it.I am also going to order a new bushings and hardware from early classic enterprise.The firewall also got stripped and primered. The front clip should be back on in a few weeks.And then a motor and trans are next.Woohoo. I am also ordering a eagle rotating assembly to build a 383 for my 69. Looks like things might be coming along. __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.