GM Pulse Generator for electroc speedo

[Hart_Rod]

This a new part. They list for $129 from DD, I will take $80 shipped. I had 2, and still have one left!

The missing piece of the increasingly popular early-GM transmission swap!
With late-model GM transmissions containing an internal speed sensor outputting 128,000 Pulses Per Mile, the stock 40-tooth (40 pulse per revolution) reluctor ring provided the factory ECM with a high frequency input. The SEN-01-128 can now recreate this missing high frequency rate when converting to an older style transmission with a mechanical speedometer output.

With a standard female 7/8” thread-on fitting, the SEN-01-128 fits all GM transmissions with a mechanical speedometer cable outlet. Removable weather-tight 10’ cable provides for simple installation and cable routing. 128,000 Pulse Per Mile Sine Wave signal output is direct replacement for the stock GM internal speed sensor, allowing the ECM receive the signals it needs for proper operation.

Fits GM transmission models with 7/8” Male Threading, ie: TH350, TH400, 700r4, 2004r, etc.

http://www.dakotadigital.com/index.c...rod/prd916.htm

[Hart_Rod]

bump

[chevy-fun]

im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire

[Hart_Rod]

Originally Posted by chevy-fun

im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire

Here are the directions to the sensor:

http://www.dakotadigital.com/PDF/SEN-01-128.PDF

Looks like you have a 12V power, GRND and the sensor output. Which matches up to #3. Let me know.

Rob

[Hart_Rod]

Originally Posted by chevy-fun

im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire

Do you want it?

[chevy-fun]

Yes. But strap on cash right now. Don't get paid till Wednesday. I'll check back then to see if it hasnt sold

[Hart_Rod]

Originally Posted by chevy-fun

Yes. But strap on cash right now. Don't get paid till Wednesday. I'll check back then to see if it hasnt sold

No worries . I hqve two of them,

[Aruba1]

Will it work on the 5.3L with NV4500?

[Hart_Rod]

Originally Posted by Aruba1

Will it work on the 5.3L with NV4500?

I dont see why not.

[Hart_Rod]

Originally Posted by Aruba1

Will it work on the 5.3L with NV4500?

Are you still interested?

[Hart_Rod]

Originally Posted by chevy-fun

payment sent

Shipped, thanks again!

Originally Posted by Aruba1

Will it work on the 5.3L with NV4500?

I still have one left, let me know .

[chevy-fun]

Hi HART ROD. if you can send me your paypal or how to pay. I can send the $ around 3-4am, an when would you be able to ship. hoping to try to have before the wkend when i go out town for a show. thanx you in advance

[Hart_Rod]

Originally Posted by chevy-fun

Hi HART ROD. if you can send me your paypal or how to pay. I can send the $ around 3-4am, an when would you be able to ship. hoping to try to have before the wkend when i go out town for a show. thanx you in advance

Paypal is robhartley@aol.com. It would have to be overnighted fornyou to get it by this weekend.

[chevy-fun]

its k just ship it regular. doubt i would have time to actually get it put on in time cuz of work. ill send the $ in morning. thanx again

[Hart_Rod]

Originally Posted by chevy-fun

its k just ship it regular. doubt i would have time to actually get it put on in time cuz of work. ill send the $ in morning. thanx again

Sounds good!

[chevy-fun]

payment sent

[Hart_Rod]

Originally Posted by chevy-fun

payment sent

Will be in the mail today. Thanks!

[chevy-fun]

Received the part. Thanx again Hart Rod

[Hart_Rod]

Originally Posted by chevy-fun

Received the part. Thanx again Hart Rod

Your welcome!

I have one more left!

[Hart_Rod]

Bump

[chevy-fun]

thanx again HART ROD. finally got around to installing last wk. gauge is finally working.

[Hart_Rod]

Originally Posted by chevy-fun

thanx again HART ROD. finally got around to installing last wk. gauge is finally working.

Sweet! I've got one more for sale if anybody else needs one.

[Hart_Rod]

bttt

[elf w/capital T]

If it only fit and worked on an nv3500. Ugh good luck!

[Hart_Rod]

Originally Posted by elf w/capital T

If it only fit and worked on an nv3500. Ugh good luck!

Why wouldn't it? Isn't that where your speedometer cable mounts now?