GA original paint stepside fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 02-05-2016, 04:39 PM

This is a very nice pair of stepside fenders with original paint. No rot , no bondo.some scrapes and small dings. $600 no shipping.

**southern parts** · 02-05-2016, 04:41 PM

Last pic

**southern parts** · 02-07-2016, 03:39 PM

less than aftermarket fenders cost.

**southern parts** · 02-12-2016, 02:49 PM

Ttt

**Classic v6 GMC's** · 02-12-2016, 06:51 PM

Why is it you can never find stuff when you need it!! I ended up buying reproduction's. These are some nice fenders and I think they are 66 only because the have the spot for the back up light. I also do not think they reproduce them with the spot for the back up lights.

**southern parts** · 02-13-2016, 01:40 PM

They look even better now that I've cleaned 10 years of dirt and dust off of them

LostMy65 · 02-13-2016, 03:46 PM

Very nice.

**southern parts** · 02-16-2016, 01:40 PM

up

Brad54 · 02-16-2016, 02:34 PM

I've seen this pair at my swap meet; I lucked into an entire long-step bed that is as cherry as these fenders, or I'd have bought them.
These are some of the very, very nicest fenders I've ever seen. Factory metal thickness, mounting holes in all the right places, and the added benefit of Reverse light mounts for you earlier guys (I drove my Suburban for 10 years and didn't have back-up lights... damn, you never think about them until you're driving something without them!)

These will make someone very happy.

-Brad

finnishpetter · 02-28-2016, 08:24 PM

Hey there, are you sure about no shipping???

**southern parts** · 02-28-2016, 09:21 PM

if your really interested in the fenders I`ll check on shipping . first I`ll have to find a box big enough for them . it will be next weekend before I can get a shipping estimate

Brad54 · 02-29-2016, 01:45 AM

Quote:

Originally Posted by finnishpetter

Hey there, are you sure about no shipping???

Drive up to the NE Georgia Swap Meet in Commerce, GA next Saturday and pick 'em up!

(mapquest says it's 10.5 hours from you... probably a bit far. But you'll get to go to a great swap meet, so it might be worth it!)

-Brad

contagious102 · 03-07-2016, 04:21 AM

I sold a pair and shipped them on Greyhound bus. cheap shipping, just wrapped them in lots of bubble wrap.!!

finnishpetter · 03-10-2016, 01:12 AM

Quote:

Originally Posted by contagious102

I sold a pair and shipped them on Greyhound bus. cheap shipping, just wrapped them in lots of bubble wrap.!!

Well that would be a great option!!

Jimal · 03-13-2016, 11:58 AM

Quote:

Originally Posted by contagious102

I sold a pair and shipped them on Greyhound bus. cheap shipping, just wrapped them in lots of bubble wrap.!!

And I bought them, so I can tell you they made it here in one piece.

I also sold an odd fender that I had with the truck and shipped it to the buyer using Greyhound. I've done it with a few oversize parts over the years.

Zimme228 · 11-24-2016, 03:28 AM

I wish I had seen these earlier too. I prefer not to have the spare tire up on the fender, and bought a "factory correct" reproduction without the spare tire molding for my 1966 SS. My body man sprayed primer on it before I realized that it did not have a molding for the backup light, so Eckler's wouldn't take it back. I had it sent directly to the shop and took the salesman at their word about it being factory correct, but they didn't know anything about it having a backup light. No, apparently no one reproduces that because of little demand.

Hmh70 · 03-17-2017, 02:03 AM

Quote:

Originally Posted by Zimme228

I wish I had seen these earlier too. I prefer not to have the spare tire up on the fender, and bought a "factory correct" reproduction without the spare tire molding for my 1966 SS. My body man sprayed primer on it before I realized that it did not have a molding for the backup light, so Eckler's wouldn't take it back. I had it sent directly to the shop and took the salesman at their word about it being factory correct, but they didn't know anything about it having a backup light. No, apparently no one reproduces that because of little demand.

I have this fender with cutout for spare and backup light and gas filler available. It's in good shape

**southern parts** · 03-17-2017, 08:07 AM

You have to pay to play here.

Hmh70 · 03-17-2017, 01:11 PM

Quote:

Originally Posted by southern parts

You have to pay to play here.

This site is hard to navigate for such a non Internet person. How do I pay to be able to sell. Is it invite or what. Don't want to piss anyone off but can't figure it out

**southern parts** · 03-17-2017, 03:22 PM

At the top of the page you'll see a blue box with subscribe in it. Click on subscribe

**GMCNUT** · 11-25-2016, 11:44 AM

Hey been meaning to ask whatever became of my 3/4 ton split rims we discussed a while back; did someone ever buy them?

**southern parts** · 11-25-2016, 02:17 PM

I still have them. Didn't see you at moultrie, the wheels are not split rims. They are 17.5 " one piece.

Zimme228 · 11-25-2016, 02:19 PM

Good afternoon, does anyone know who might be interested in a refurbished 1966 step-side fender with the spare tire molding and back-up light molding? The Tire Mount goes with it, and the inner box side can go too, but that I haven't rebuilt. I was saving this fender and spare tire mount because I hear that they are getting a bit harder to find, in case some day I wanted to switch my truck to how it came factory, but decided to let it go.

These are the best two photos I have at the moment, and the tire mount additional angle-iron bracket I also have, it just didn't make it into the photo.

Please PM me if you can help me find a person who would like to have these parts for their project. Thank you. I appreciate it!

02-05-2016, 04:39 PM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	original paint stepside fenders This is a very nice pair of stepside fenders with original paint. No rot , no bondo.some scrapes and small dings. $600 no shipping. Attached Images

02-05-2016, 04:41 PM	#2
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders Last pic Attached Images

02-07-2016, 03:39 PM	#3
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders less than aftermarket fenders cost.

02-12-2016, 02:49 PM	#4
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders Ttt

02-12-2016, 06:51 PM	#5
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: original paint stepside fenders Why is it you can never find stuff when you need it!! I ended up buying reproduction's. These are some nice fenders and I think they are 66 only because the have the spot for the back up light. I also do not think they reproduce them with the spot for the back up lights. __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

02-13-2016, 01:40 PM	#6
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders They look even better now that I've cleaned 10 years of dirt and dust off of them

02-13-2016, 03:46 PM	#7
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: original paint stepside fenders Very nice. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-16-2016, 01:40 PM	#8
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders up

02-16-2016, 02:34 PM	#9
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: original paint stepside fenders I've seen this pair at my swap meet; I lucked into an entire long-step bed that is as cherry as these fenders, or I'd have bought them. These are some of the very, very nicest fenders I've ever seen. Factory metal thickness, mounting holes in all the right places, and the added benefit of Reverse light mounts for you earlier guys (I drove my Suburban for 10 years and didn't have back-up lights... damn, you never think about them until you're driving something without them!) These will make someone very happy. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

02-28-2016, 08:24 PM	#10
finnishpetter Registered User Join Date: Jul 2015 Location: Oakland Park, FL Posts: 7	Re: original paint stepside fenders Hey there, are you sure about no shipping???

02-28-2016, 09:21 PM	#11
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders if your really interested in the fenders I`ll check on shipping . first I`ll have to find a box big enough for them . it will be next weekend before I can get a shipping estimate

03-07-2016, 04:21 AM	#13
contagious102 Registered User Join Date: May 2012 Location: Semmes,Al. Posts: 407	Re: original paint stepside fenders I sold a pair and shipped them on Greyhound bus. cheap shipping, just wrapped them in lots of bubble wrap.!! __________________ Go Fast and Have Fun.!! My pro street build, http://67-72chevytrucks.com/vboard/s...d.php?t=551185

11-24-2016, 03:28 AM	#16
Zimme228 Registered User Join Date: Nov 2016 Location: Milwaukee, WI. Posts: 48	Re: original paint stepside fenders I wish I had seen these earlier too. I prefer not to have the spare tire up on the fender, and bought a "factory correct" reproduction without the spare tire molding for my 1966 SS. My body man sprayed primer on it before I realized that it did not have a molding for the backup light, so Eckler's wouldn't take it back. I had it sent directly to the shop and took the salesman at their word about it being factory correct, but they didn't know anything about it having a backup light. No, apparently no one reproduces that because of little demand.

03-17-2017, 08:07 AM	#18
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders You have to pay to play here.

03-17-2017, 03:22 PM	#20
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders At the top of the page you'll see a blue box with subscribe in it. Click on subscribe



Register or Log In To remove these advertisements.

11-25-2016, 11:44 AM	#21
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: original paint stepside fenders Hey been meaning to ask whatever became of my 3/4 ton split rims we discussed a while back; did someone ever buy them? __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

11-25-2016, 02:17 PM	#22
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: original paint stepside fenders I still have them. Didn't see you at moultrie, the wheels are not split rims. They are 17.5 " one piece.

11-25-2016, 02:19 PM	#23
Zimme228 Registered User Join Date: Nov 2016 Location: Milwaukee, WI. Posts: 48	Re: original paint stepside fenders Good afternoon, does anyone know who might be interested in a refurbished 1966 step-side fender with the spare tire molding and back-up light molding? The Tire Mount goes with it, and the inner box side can go too, but that I haven't rebuilt. I was saving this fender and spare tire mount because I hear that they are getting a bit harder to find, in case some day I wanted to switch my truck to how it came factory, but decided to let it go. These are the best two photos I have at the moment, and the tire mount additional angle-iron bracket I also have, it just didn't make it into the photo. Please PM me if you can help me find a person who would like to have these parts for their project. Thank you. I appreciate it! Attached Images

Register or Log In To remove these advertisements.