New seat cover came today... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EARNHARDT#3 · 02-11-2016, 08:56 PM

I can't wait to get this installed! Beautifully made by ricks upholstery. Black vinyl with blue and black houndstooth.

**LockDoc** · 02-11-2016, 09:14 PM

-
I like it! Good choice.

LockDoc

toolboxchev · 02-11-2016, 10:06 PM

That looks nice, I checked his site did not see any prices. What did that one run you? Can you install one with no special tools?

I think you have to have the ring crimp tool if I remember correctly.

Thanks

**SoCoC10** · 02-11-2016, 10:22 PM

If you mind me asking, what does a seat cover like that cost? How long did it take for them to make it? Thanks

toolboxchev · 02-12-2016, 01:09 AM

That's Hot, Again thanks!

I would love to see pics when its done!

EARNHARDT#3 · 02-11-2016, 10:12 PM

It was $225 plus shipping. You should just need hog ring pliers and hog rings.

Mrturner1 · 02-12-2016, 03:05 AM

Quote:

Originally Posted by EARNHARDT#3

It was $225 plus shipping. You should just need hog ring pliers and hog rings.

This much

EARNHARDT#3 · 02-12-2016, 09:11 AM

I'll post pics when it's installed.

FlameOut · 02-12-2016, 09:27 AM

That looks good! I see you're in PA. Is Ricks Upholstery in PA? I had some seats done a few years back at a place in Gibsonia PA. Pretty sure it was called Ricks Upholstery

**70cst** · 02-12-2016, 09:48 AM

Agreed with the above - very nice

EARNHARDT#3 · 02-12-2016, 10:10 AM

Quote:

Originally Posted by FlameOut

That looks good! I see you're in PA. Is Ricks Upholstery in PA? I had some seats done a few years back at a place in Gibsonia PA. Pretty sure it was called Ricks Upholstery

No, this place isn't in PA.

frenchy51 · 02-12-2016, 10:21 AM

Quote:

Originally Posted by EARNHARDT#3

No, this place isn't in PA.

Nice looking seat. I'm looking for a shop to make me a plaid one for my Highlander. I googled "rick's Upholstery" and got lots of choices. Where is your Rick's located? Thanks

EARNHARDT#3 · 02-12-2016, 10:55 AM

Quote:

Originally Posted by frenchy51

Nice looking seat. I'm looking for a shop to make me a plaid one for my Highlander. I googled "rick's Upholstery" and got lots of choices. Where is your Rick's located? Thanks

www.ricksupholstery.com

02-11-2016, 08:56 PM	#1
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	New seat cover came today... I can't wait to get this installed! Beautifully made by ricks upholstery. Black vinyl with blue and black houndstooth. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-11-2016, 09:14 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: New seat cover came today... - I like it! Good choice. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-11-2016, 10:22 PM	#4
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,343	Re: New seat cover came today... If you mind me asking, what does a seat cover like that cost? How long did it take for them to make it? Thanks __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

02-12-2016, 01:09 AM	#5
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: New seat cover came today... That's Hot, Again thanks! I would love to see pics when its done!

02-11-2016, 10:12 PM	#6
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: New seat cover came today... It was $225 plus shipping. You should just need hog ring pliers and hog rings. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-11-2016, 10:06 PM	#3
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: New seat cover came today... That looks nice, I checked his site did not see any prices. What did that one run you? Can you install one with no special tools? I think you have to have the ring crimp tool if I remember correctly. Thanks

02-12-2016, 09:11 AM	#8
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: New seat cover came today... I'll post pics when it's installed. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-12-2016, 09:27 AM	#9
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: New seat cover came today... That looks good! I see you're in PA. Is Ricks Upholstery in PA? I had some seats done a few years back at a place in Gibsonia PA. Pretty sure it was called Ricks Upholstery __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS Last edited by FlameOut; 02-12-2016 at 09:50 AM.

02-12-2016, 09:48 AM	#10
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: New seat cover came today... Agreed with the above - very nice __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.