71 GMC 4x4 Transfer Case Shifter bolt needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimbo333 · 09-22-2003, 05:08 PM

I am looking for a bolt that holds the four wheel driver shift lever on for a 1971 GMC 4x4. The one that was in there was broken off by the previous owner. It appears to be a tapered bolt. None of the shops here in AZ carry this and requests at the local junk yards has not turned up anything. Does anyone have one they would be willing to sell or know where I might find one?

Thanks!

jose · 09-22-2003, 06:32 PM

Do you know if it still has original threads or has it been re-threaded ? I do have a stock bolt .

jimbo333 · 09-22-2003, 06:38 PM

I think it is stock thread, it appears to be the origonal bolt. I am interested in buying the bolt off you, let me know how much you would like for it.

badpeanut · 09-22-2003, 11:00 PM

There were two sizes--7/16" and 1/2". Check which you need before you buy.

*rickspickuppart* · 09-23-2003, 11:04 AM

Jimbo

Glad to see you made it to the board, I figured that someone on here would have that bolt.

Shawn

jose · 09-23-2003, 11:44 AM

jimbo333 Did you ever find out what size you need . I think i have the 1/2 inch . I will get the exact measurement and get back to you . Jose

jimbo333 · 09-23-2003, 12:59 PM

I need the 1/2 inch.

jose · 09-23-2003, 01:51 PM

I had it measured and it is 9/16 coarse thread . I didn't know they were different sizes . Let me know if it will work for you .

09-22-2003, 05:08 PM	#1
jimbo333 Registered User Join Date: Sep 2003 Posts: 8	71 GMC 4x4 Transfer Case Shifter bolt needed I am looking for a bolt that holds the four wheel driver shift lever on for a 1971 GMC 4x4. The one that was in there was broken off by the previous owner. It appears to be a tapered bolt. None of the shops here in AZ carry this and requests at the local junk yards has not turned up anything. Does anyone have one they would be willing to sell or know where I might find one? Thanks!

09-22-2003, 06:32 PM	#2
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Do you know if it still has original threads or has it been re-threaded ? I do have a stock bolt . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

09-23-2003, 11:44 AM	#6
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	jimbo333 Did you ever find out what size you need . I think i have the 1/2 inch . I will get the exact measurement and get back to you . Jose __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

09-23-2003, 01:51 PM	#8
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	I had it measured and it is 9/16 coarse thread . I didn't know they were different sizes . Let me know if it will work for you . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

09-22-2003, 06:38 PM	#3
jimbo333 Registered User Join Date: Sep 2003 Posts: 8	I think it is stock thread, it appears to be the origonal bolt. I am interested in buying the bolt off you, let me know how much you would like for it.

09-22-2003, 11:00 PM	#4
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	There were two sizes--7/16" and 1/2". Check which you need before you buy.

09-23-2003, 11:04 AM	#5
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	Jimbo Glad to see you made it to the board, I figured that someone on here would have that bolt. Shawn

09-23-2003, 12:59 PM	#7
jimbo333 Registered User Join Date: Sep 2003 Posts: 8	I need the 1/2 inch.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.