|
|
|
03-09-2016, 10:00 PM
|
#1 |
|
Registered User
Join Date: Feb 2016
Location: San Diego California
Posts: 41
|
Starter whine
So I had the usual heat sink starter issue and after much research picked up the camaro/corvette starter as a replacement. Looks exactly like the stock one bolted right in, no problems but did have the whine after the motor turned over. So I started adding shims, all three shims are in and still does the whine for a second after starting. I could try cutting the shims and only shimming the inner bolt for more distance but the mounting instructions said not to add more than the three shims included which don't seem to cut it for mine.
|
|
|
|
03-10-2016, 12:04 AM
|
#2 |
|
Registered User
Join Date: Feb 2016
Location: San Diego California
Posts: 41
|
Re: Starter whine
Any help is appreciated
|
|
|
|
|
03-10-2016, 12:06 PM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: Ogden, UT
Posts: 123
|
Re: Starter whine
Whine after start need to shim one side only IIRC, someone else will know more...
__________________
1972 C/10 Cheyenne, Daily Driver. SOLD 1978 GMC K15 High Sierra. |
|
|
|
|
03-10-2016, 04:57 PM
|
#4 |
|
Registered User
Join Date: Feb 2016
Location: San Diego California
Posts: 41
|
Re: Starter whine
Just to clarify, the whine sound seems to be the starter taking just a second too long to disengage after the engine turns over. I'm going to pull the flywheel inspection cover and check the gap when I get a chance
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
