CA 16x8 6 lug wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brianhill6 · 03-23-2016, 10:05 AM

Set of 6 freshly powder coated wheels. Asking $600 would prefer local pickup, but will ship if the cost of the boxes and packaging is covered.

praisegeetarman · 03-23-2016, 10:47 AM

Very interested pending answers to a couple questions. Can I get a pic of the tape measure in the wheel measuring the backspace? (maybe the end of the tape against the mounting surface and a straight edge across the back?)

16", correct? Who built these?

thanks,

Keith

Brianhill6 · 03-23-2016, 10:54 AM

Yes I can. I am at work, but had my buddy run by and measure. He is working on sending me a picture to post. He said from the flange to the back lip is 4"

Brianhill6 · 03-23-2016, 01:12 PM

Brianhill6 · 03-23-2016, 01:14 PM

These are a rare wheel that came on some factory blazers and 4x4 pickups. I don't know all the details, but I do know they are getting hard to come by. They are 16"

praisegeetarman · 03-23-2016, 01:49 PM

Quote:

Originally Posted by Brianhill6

These are a rare wheel that came on some factory blazers and 4x4 pickups. I don't know all the details, but I do know they are getting hard to come by. They are 16"

Ok, looks great. I will take them pending shipping charges to zip code 98933.

thanks,

Keith

**lolife99** · 04-12-2016, 12:34 PM

Quote:

Originally Posted by Brianhill6

These are a rare wheel that came on some factory blazers and 4x4 pickups. I don't know all the details, but I do know they are getting hard to come by. They are 16"

EDIT:
I didn't realize these had sold

praisegeetarman · 04-12-2016, 12:41 PM

Quote:

Originally Posted by lolife99

These wheels have the pre'71 3-nub centers.
Can you confirm that they will clear a disc brake caliper?

Well, if they really were 16" wheels like the ad says, then the 3 nubs would clear the disk brake calipers, but they are not. They are 15's, so no. 15" 3 nubs will not clear.

Keith

praisegeetarman · 04-12-2016, 01:22 PM

Quote:

Originally Posted by lolife99

EDIT:
I didn't realize these had sold

Well, they will be going back. They are 15's not 16's. Pics to follow.

Keith

Brianhill6 · 03-23-2016, 01:14 PM

FYI they take the original bow tie dog dish hub caps

bluek5 · 03-23-2016, 01:44 PM

Just want to clarify you have 6 of these? If so I will take them if they get to me. Pending shipping and handling charges.
Thanks, Paul

Brianhill6 · 03-23-2016, 01:55 PM

Ok let me see what boxes will cost and I will get a shipping quote asap. Yes there are 6 total

Brianhill6 · 03-23-2016, 02:03 PM

looks like I can get boxes the exact size to hold 2. I can get 3 of them for $25, but I will have to order them, so it would take a few days before I could box them up. USPS quoted me 52.25 each box, must be because of the weight. UPS wants $54.61 per box. So shipping with box price would be $181.75 for USPS, or I can do UPS if you prefer them.

praisegeetarman · 03-23-2016, 04:10 PM

Quote:

Originally Posted by Brianhill6

looks like I can get boxes the exact size to hold 2. I can get 3 of them for $25, but I will have to order them, so it would take a few days before I could box them up. USPS quoted me 52.25 each box, must be because of the weight. UPS wants $54.61 per box. So shipping with box price would be $181.75 for USPS, or I can do UPS if you prefer them.

Could you get a quote from UPS? I'm sure they would probably be cheaper. As far as being a few days, that's fine. I'm not in a hurry.

thanks,

Keith

tjsblazer · 03-23-2016, 02:35 PM

Nice looking wheels. Curious were these fabricated by someone.
Are these 16" or 16.5" diameter?

Brianhill6 · 03-23-2016, 02:43 PM

They are 16" wheels and are originals. From what I understand, they came on forest ranger trucks, blazers and some other options. Not sure about the whole history. They are exactly the same as the stock 16x6 that came on the 4x4's but these are 8"

Brianhill6 · 03-23-2016, 04:21 PM

UPS wanted a few dollars more than USPS. I put that in a few posts back. USPS wanted $52.25 per box that has 2 wheels in it. UPS wants $54.61 It is up to you who I use.
$781.75 With USPS
$788.83 With UPS
Remember there is $25 in there for the boxes
My paypal is brianhill6@yahoo.com

praisegeetarman · 03-23-2016, 05:21 PM

Quote:

Originally Posted by Brianhill6

UPS wanted a few dollars more than USPS. I put that in a few posts back. USPS wanted $52.25 per box that has 2 wheels in it. UPS wants $54.61 It is up to you who I use.
$781.75 With USPS
$788.83 With UPS
Remember there is $25 in there for the boxes
My paypal is brianhill6@yahoo.com

Ok. I'll get the payment over to you today. Wish I knew these existed. I paid $1200 for a set of 4 16 X 6's to be built for me a few months back. I ran them as 16 X 5's for a while, but that is just too narrow.

thanks,

Keith

praisegeetarman · 03-23-2016, 05:25 PM

Quote:

Originally Posted by praisegeetarman

Ok. I'll get the payment over to you today. Wish I knew these existed. I paid $1200 for a set of 4 16 X 6's to be built for me a few months back. I ran them as 16 X 5's for a while, but that is just too narrow.

thanks,

Keith

Ok. Sent Payment for USPS shipping. Please let me know the tracking info. when you ship.

thanks,

Keith

Brianhill6 · 03-23-2016, 05:26 PM

I drove 300 miles to buy them last year. Ended up selling my blazer with some mickey's on it. Guy was not interested in the wheels and they are just getting in the way. Figured if i could get what I have into them and someone gets what they are looking for, we both win

tjsblazer · 03-23-2016, 05:27 PM

Brian these are nice looking wheels and would look great on a truck for sure but I don't believe the factory every put a set of 16x8 wheels out for this era.

I don't want to impact your sale (excellent price btw) but for the purpose of everyone's education, including my own, I don't think these are Chev oem. I researched this for many months and actually just got a set myself fabricated to be 16x8's.

The only 16" 6 lug rim from GM for this era is a 5" skinny rim with the center riveted to the outer hoop. These were used on vehicles that were ordered with a higher ply bias tubed tire. For this era, they came with a similar looking center to yours from 63 -70 and a slightly different looking center with 4 nubs in 71 & 72. These were available on both K10 and Blazers.

I have attached an image borrowed from another thread of the option part numbers showing the list. Also note on the list that there isn't the popular 15x8" shown. This is because technically they were not a factory listed option. I think they were all post production or dealer installs.

Again, I am just putting this out there for information which is one of the big benefits of this forum.
Regardless the rims look great and the price also.

Brianhill6 · 03-23-2016, 05:28 PM

I see you made the payment. I will get boxes ordered and keep you up to date. Is the shipping address that showed up in your paypal email where you want them shipped to?

praisegeetarman · 03-23-2016, 05:47 PM

Quote:

Originally Posted by Brianhill6

I see you made the payment. I will get boxes ordered and keep you up to date. Is the shipping address that showed up in your paypal email where you want them shipped to?

Yes. My wife's name is on the account, but the address is the same.

Brianhill6 · 03-24-2016, 09:53 AM

Ordered the boxes this morning. Wanted to measure the wheels again before I ordered them. I was a little off on what I estimated. I also forgot to add insurance in when I looked up shipping cost. I am going to cover that. I have had things happen in the past. I prefer to make sure both parties are covered.

praisegeetarman · 04-02-2016, 03:56 PM

Quote:

Originally Posted by Brianhill6

Ordered the boxes this morning. Wanted to measure the wheels again before I ordered them. I was a little off on what I estimated. I also forgot to add insurance in when I looked up shipping cost. I am going to cover that. I have had things happen in the past. I prefer to make sure both parties are covered.

Left you a PM a couple days ago. Have you shipped?

Keith

03-23-2016, 10:05 AM	#1
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	16x8 6 lug wheels Set of 6 freshly powder coated wheels. Asking $600 would prefer local pickup, but will ship if the cost of the boxes and packaging is covered.

03-23-2016, 10:47 AM	#2
praisegeetarman Registered User Join Date: Feb 2010 Location: Harrah, Washington Posts: 323	Re: 16x8 6 lug wheels Very interested pending answers to a couple questions. Can I get a pic of the tape measure in the wheel measuring the backspace? (maybe the end of the tape against the mounting surface and a straight edge across the back?) 16", correct? Who built these? thanks, Keith __________________ 71 Blazer 4X4 (unmolested, all original (including paint) 74,000 mile barn find) 67 Camaro RS SS (unmolested, all original (including paint) 81,000 mile barn find) Keith Riel Last edited by praisegeetarman; 03-23-2016 at 10:53 AM.

03-23-2016, 10:54 AM	#3
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels Yes I can. I am at work, but had my buddy run by and measure. He is working on sending me a picture to post. He said from the flange to the back lip is 4"

03-23-2016, 01:12 PM	#4
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels

03-23-2016, 01:14 PM	#5
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels These are a rare wheel that came on some factory blazers and 4x4 pickups. I don't know all the details, but I do know they are getting hard to come by. They are 16"

03-23-2016, 01:14 PM	#10
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels FYI they take the original bow tie dog dish hub caps

03-23-2016, 01:44 PM	#11
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 16x8 6 lug wheels Just want to clarify you have 6 of these? If so I will take them if they get to me. Pending shipping and handling charges. Thanks, Paul

03-23-2016, 01:55 PM	#12
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels Ok let me see what boxes will cost and I will get a shipping quote asap. Yes there are 6 total

03-23-2016, 02:03 PM	#13
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels looks like I can get boxes the exact size to hold 2. I can get 3 of them for $25, but I will have to order them, so it would take a few days before I could box them up. USPS quoted me 52.25 each box, must be because of the weight. UPS wants $54.61 per box. So shipping with box price would be $181.75 for USPS, or I can do UPS if you prefer them.

03-23-2016, 02:35 PM	#15
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 16x8 6 lug wheels Nice looking wheels. Curious were these fabricated by someone. Are these 16" or 16.5" diameter? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

03-23-2016, 02:43 PM	#16
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels They are 16" wheels and are originals. From what I understand, they came on forest ranger trucks, blazers and some other options. Not sure about the whole history. They are exactly the same as the stock 16x6 that came on the 4x4's but these are 8"

03-23-2016, 04:21 PM	#17
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels UPS wanted a few dollars more than USPS. I put that in a few posts back. USPS wanted $52.25 per box that has 2 wheels in it. UPS wants $54.61 It is up to you who I use. $781.75 With USPS $788.83 With UPS Remember there is $25 in there for the boxes My paypal is brianhill6@yahoo.com

03-23-2016, 05:26 PM	#20
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels I drove 300 miles to buy them last year. Ended up selling my blazer with some mickey's on it. Guy was not interested in the wheels and they are just getting in the way. Figured if i could get what I have into them and someone gets what they are looking for, we both win

03-23-2016, 05:27 PM	#21
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 16x8 6 lug wheels Brian these are nice looking wheels and would look great on a truck for sure but I don't believe the factory every put a set of 16x8 wheels out for this era. I don't want to impact your sale (excellent price btw) but for the purpose of everyone's education, including my own, I don't think these are Chev oem. I researched this for many months and actually just got a set myself fabricated to be 16x8's. The only 16" 6 lug rim from GM for this era is a 5" skinny rim with the center riveted to the outer hoop. These were used on vehicles that were ordered with a higher ply bias tubed tire. For this era, they came with a similar looking center to yours from 63 -70 and a slightly different looking center with 4 nubs in 71 & 72. These were available on both K10 and Blazers. I have attached an image borrowed from another thread of the option part numbers showing the list. Also note on the list that there isn't the popular 15x8" shown. This is because technically they were not a factory listed option. I think they were all post production or dealer installs. Again, I am just putting this out there for information which is one of the big benefits of this forum. Regardless the rims look great and the price also. Attached Images __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 03-26-2016 at 01:35 AM.

03-23-2016, 05:28 PM	#22
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels I see you made the payment. I will get boxes ordered and keep you up to date. Is the shipping address that showed up in your paypal email where you want them shipped to? Last edited by Brianhill6; 03-23-2016 at 05:41 PM.



Register or Log In To remove these advertisements.

03-24-2016, 09:53 AM	#24
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 16x8 6 lug wheels Ordered the boxes this morning. Wanted to measure the wheels again before I ordered them. I was a little off on what I estimated. I also forgot to add insurance in when I looked up shipping cost. I am going to cover that. I have had things happen in the past. I prefer to make sure both parties are covered.

Register or Log In To remove these advertisements.