door logo led projector - The 1947 - Present Chevrolet & GMC Truck Message Board Network

simply ed · 03-28-2016, 04:12 PM

Awhile ago I saw a Lincoln with something like this from the factory, I wanted it for my 67 C10 long stepper. I found them on ebay 15 for two, 25 for 4. I bought the set of 4, two for my 67, two for my 08 Colorado.

simply ed · 03-28-2016, 04:21 PM

I didn't feel like drilling and tapping my a pillar, so I removed a door bumper and installed a door jamb switch in the hole. the remainder of the install was fairly simple, so i'll skip the specifics and say to use a 3/4" drill bit to drill a hole in the bottom of the door, and a smaller bit, (I used 1/4") to drill holes in the door and cab to run your wires.

Big O · 03-28-2016, 04:26 PM

NICE!!! Wonder what it would look like if you had one projected on the inside of the hood when you opened it up....

simply ed · 03-28-2016, 04:30 PM

Quote:

Originally Posted by Big O

NICE!!! Wonder what it would look like if you had one projected on the inside of the hood when you opened it up....

I thought about that, I also thought about projecting it on the floor boards, but the pedals got in the way on the drivers side.

jessemthompson · 03-28-2016, 08:40 PM

I imagine you had to purchase the door jam switch yourself. I did not see it in the kit on ebay. I like the idea of this. Adds a modern touch to the truck.

Andy4639 · 03-28-2016, 08:42 PM

I'm going to tie them into the switch already in the truck.

simply ed · 03-29-2016, 12:48 AM

Quote:

Originally Posted by jessemthompson

I imagine you had to purchase the door jam switch yourself. I did not see it in the kit on ebay. I like the idea of this. Adds a modern touch to the truck.

Yeah. There just the switches that come on trucks from like 68 to 79 (the ones that have a single female bullet connector, not a double male blade), but dont quote me on the exact years. I just went to napa and asked for switches from a 76 and then bought a 3/8-24 fine thread nut to tighten the switch in place. Switches like $5 each but you should be able to get them online cheaper.

simply ed · 03-28-2016, 04:27 PM

they look pretty good at night. the second picture is from when I was in a parking garage with partial daylight.

**Dieselwrencher** · 03-28-2016, 09:07 PM

I almost bought some of these but was worried they would look blurry on the ground. Your pics look really nice.

03-28-2016, 04:12 PM	#1
simply ed Registered User Join Date: Mar 2014 Location: houston, tx Posts: 12	door logo led projector Awhile ago I saw a Lincoln with something like this from the factory, I wanted it for my 67 C10 long stepper. I found them on ebay 15 for two, 25 for 4. I bought the set of 4, two for my 67, two for my 08 Colorado. Attached Images

03-28-2016, 04:21 PM	#2
simply ed Registered User Join Date: Mar 2014 Location: houston, tx Posts: 12	Re: door logo led projector I didn't feel like drilling and tapping my a pillar, so I removed a door bumper and installed a door jamb switch in the hole. the remainder of the install was fairly simple, so i'll skip the specifics and say to use a 3/4" drill bit to drill a hole in the bottom of the door, and a smaller bit, (I used 1/4") to drill holes in the door and cab to run your wires. Attached Images

03-28-2016, 04:26 PM	#3
Big O Registered User Join Date: May 2006 Location: North of Houston, TX Posts: 39	Re: door logo led projector NICE!!! Wonder what it would look like if you had one projected on the inside of the hood when you opened it up....

03-28-2016, 08:40 PM	#5
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: door logo led projector I imagine you had to purchase the door jam switch yourself. I did not see it in the kit on ebay. I like the idea of this. Adds a modern touch to the truck.

03-28-2016, 08:42 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: door logo led projector I'm going to tie them into the switch already in the truck. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-28-2016, 04:27 PM	#8
simply ed Registered User Join Date: Mar 2014 Location: houston, tx Posts: 12	Re: door logo led projector they look pretty good at night. the second picture is from when I was in a parking garage with partial daylight. Attached Images

03-28-2016, 09:07 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: door logo led projector I almost bought some of these but was worried they would look blurry on the ground. Your pics look really nice. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.